![2024 Approved M4R Converter, M4a to M4r, Convert M4a to M4r, Mp3 M4r, Aac to M4r, Wav to M4r, M4r Converter Online, Change M4a to M4r](https://thmb.techidaily.com/07cfabd2fe9acb782e30cca8205dc0f557a2c3371dbf02532bc0633c00063d56.jpg)
2024 Approved M4R Converter, M4a to M4r, Convert M4a to M4r, Mp3 M4r, Aac to M4r, Wav to M4r, M4r Converter Online, Change M4a to M4r
![](/images/site-logo.png)
M4R Converter, M4a to M4r, Convert M4a to M4r, Mp3 M4r, Aac to M4r, Wav to M4r, M4r Converter Online, Change M4a to M4r
Before You Learn M4R Converter: Some Things You Should Know
An easy yet powerful editor
Numerous effects to choose from
Detailed tutorials provided by the official channel
M4R is an audio file extension that was created by Apple to separate regular songs and audio from ringtones
As for methods of converting from your more general file extension formats to M4R, we’ve prepared a whole guide below — where we’ve outlined some of the more important things that you should know about M4R converters and how to use them.
In this article
01 [Why Convert Mp3 to M4R?](#Part 1)
02 [How to Convert Mp3 to M4R?](#Part 2)
03 [How to Convert M4A to M4R?](#Part 3)
Part 1 Why Convert MP3 to M4R?
Let’s start with a bit of an overview of M4R and M4R Converters first! We touched upon this subject in the introduction, but we thought it would be best to expand on the subject here for better understanding. First, let’s talk about what an M4R converter is usually like. Then, let’s talk about why someone might convert from MP3 to M4R.
01M4R Converter Key Features
Here’s a list of some key features that you should look for in an M4R Converter:
● Your average M4R Converter should allow you to convert to M4R from general audio files. That includes the following: MP3, WAV, WMA, AIFF, AMR, FLAC, MKA, WMV, and so much more.
● It should also allow you to ‘extract’ audio from videos (whether it is a MPEG-4, MOV, AVI, etc.)
● The M4R converter would prove even more useful if it allowed you to trim small segments of audio or video (with exact start and end time) so that you can specify which part should play as a ringtone.
● A method of previewing trimmed content prior to conversion would also be helpful so that you won’t have to undergo the process again and again.
● Its settings should also be adjustable or the interface intuitive, allowing you to easily choose or discover the output folder, adjust audio bitrate, and so on.
02Best Three Reasons Why Convert MP3 to M4R
There are several reasons why you might want to use an M4R converter to change from MP3 to M4R, these reasons include:
● Creating iPhone Ringtone: The main purpose of converting to M4R is, of course, to create iPhone ringtones. This file extension was created by Apple specifically to differentiate between songs and ringtones. And, if you’re a regular iOS user but are not a fan of the basic iOS ringtones, learning how to create M4R files would be beneficial in opening your horizons.
● Transfer Ringtones to iPhone: Of course, once the M4R is created for use, it would need to be transferred. This is much easier if it stays in this format!
● Making General M4R Audio: Although not as common, some users see the benefit of using M4R audio for other reasons (i.e., content creators sometimes use M4R audio as a sound-effect for videos). Thus, knowing how to convert from MP3 to MP4 usually proves to be useful for them.
Part 2 How to Convert Mp3 to M4R?
Now, let’s start with a more in-depth tutorial on how to actually convert MP3 to M4R! In this case, specifically, we’ll be providing three different examples. Starting with an online solution and then following it up with the general iTunes conversion and the more involved software conversion!
01How to Convert MP3 to M4R Online?
As mentioned, the first M4R Converter on this list is an online one! There are plenty of these kinds of online converter tools available, and they all pretty much work the same way, so the example we’ll be showing below is more of an all-purpose kind of affair. However, just in case you’re curious, the tool we’ll be using for our examples is the Converter from Audio Tool Set!
**Step 1: Visit Online Converter Website!
First! Open the M4R Converter online tool that you want to use! If you want to follow along with our examples, a URL has been provided for you below:
**Step 2: Upload MP3 File
Next, it’s time to upload the MP3 file that you want to convert to M4R!
Usually, all you have to do for this is click the ‘Upload’ button or drag-and-drop the file onto the specified area. But, in some cases, the M4R converter may also allow you to upload via a link or from cloud-based storage (i.e., Dropbox.)
**Step 3: Select M4R as Output Format!
Once your MP3 file has been uploaded, select the format that you want it to be converted into. This may have defaulted to M4R or you may be given the chance to choose yourself (as is shown in the image below.)
**Step 4: Select Convert!
The next thing you need to do is to simply select the ‘CONVERT’ option to begin processing the change from MP3 to M4R!
**Step 5: Download Converter M4R!
Once the conversion is done, you should now have been given the option to download the finished M4R. Click ‘DOWNLOAD’ and you’re done!
012. How to convert MP3 to M4R on iTunes?
Of course, as an Apple File Extension, it only makes sense that Apple provides its users an easy way to convert general audio to M4R! In this case, we’ll be showing you another method to convert from MP3 to M4R with Apple’s own iTunes! Of course, if you want to follow along with this next example, you’ll have to download and install the software (for Windows users) before proceeding.
**Step 1: Add File or Folder to Library!
Once you have iTunes installed, launch the program and go to ‘File’ > ‘Add File to Library’ or ‘Add Folder to Library’ to upload the MP3 file(s) that you want to convert to M4R!
**Step 2: Select MP3 and Adjust Timing!
Since M4R ringtones are limited to 40 seconds only, you’ll need to adjust timing prior to conversion if you want the ringtone to start and end at a specific time.
This is possible to do by selecting the song from your library and right clicking so you can access the ‘OPTIONS’ tab (shown below)! Under the Options tab, you’ll be able to specify the start and stop time for your chosen MP3!
Click ‘OK’ when done in order to save any changes!
**Step 3: Convert to Version!
Next, with the MP3 file still selected, go to the ‘FILE’ tab (shown in the image below) and then click ‘CONVERT’ > ‘Create Version’!
**Step 4: Go to the Destination Folder!
After the conversion has been finished, locate the file’s destination folder. You’ll notice that the file extension of the file is .M4A but this is easy enough to change.
Just rename the file extension to .M4R (example shown below) and click ‘YES’ to confirm the change! In this way, you’ve managed to convert MP3 to M4R with iTunes!
013. How to Convert MP3 to M4R Online Free with Ringtone Maker?
For this last example of converting MP3 to M4R, we’ve decided to show-off the ringtone maker, Wondershare TunesGo! This program is, of course, more than just a ringtone maker, but the function that we’ll be exploring will be the process of making an iPhone Ringtone from an MP3 file to an M4R (start to finish!)
**Step 1: Launch Program and Connect iPhone to Computer!
First, launch the M4R converter software on your desktop and connect your iPhone to your computer! If you want to use the program that we’re showing off in this example, the URL has been provided below:
**Step 2: Select Ringtone Maker
Once the program has been launched, go to the ‘MUSIC’ tab and select “Ringtone Maker” (pointed out in the image below.)
**Step 3: Select Music File!
A secondary window should appear after you select the ‘Ringtone Maker’ option. Here, the first thing you have to do is upload the music file that you want to convert.
For the software that we’re using as an example, you can choose to upload ‘Local Music’ from your computer or ‘Device Music’ from the music that you have stored in your connected iPhone. We’ll be explaining the different methods to select a music file in the three following steps!
**Step 4: Local Upload - Open!
If you select ‘Local Music’ a system window will appear asking you to select the music file that you want to convert to M4R. Do so and click ‘OPEN!’
**Step 5: Device Music - SELECT!
For the ‘Device Music’ option, another program window will appear. This time, with all the music on your device. You can select the music file you want to convert from here! Click ‘Select’ when done!
**Step 6: TunesGo Library!
For the last method of selecting a music file, all you have to do is select a file from the ‘MUSIC’ tab of TunesGo, right-click on said file, and then select ‘Ringtone Maker’ on the pop-up that appears (shown below).
**Step 7: Trim and Save!
Once you’ve chosen the music file you want to convert, you can now:
● Trim the file to specify which part of the file you want to convert (40 seconds only for a proper Ringtone!)
● Use the ‘Ringtone Audition’ option to preview your trimmed audio.
● And, finally, you can save the finished ringtone directly to your PC or Device!
In this way, not only have you managed to convert from MP3 to M4R cleanly, but you can also use it right away on either your PC or iPhone!
Part 3 How to Convert M4A to M4R?
Another Apple extension file that you might recognize is M4A! This was mentioned briefly in a previous tutorial, but it might be more familiar to others as ‘compressed’ Apple Music. This is what your audio becomes when processed through iTunes. It’s also known as MPEG-4 Audio, and its main purpose is to compress the size of an audio file (compared to MP3) without compromising the quality.
01How to convert M4A to M4R on Windows?
This process was mentioned briefly in Part 2, Section 3 of this article, but we’ll be going through the easiest method of converting M4A to M4R on Windows below! This method is possible only because the formats are pretty much the same. The only difference lies in how they are categorized.
**Step 1: View File Extensions!
The first step to convert M4A to M4R is to open the folder in which your M4A audio is stored. There, make sure that you have ‘File Name Extensions’ selected under the ‘VIEW’ tab (pointed out in the image below).
This will allow you to view and edit the file extension of a given file.
**Step 2: Rename M4A to M4R!
Next, select the M4A that you want to convert and right-click so that you can choose the ‘Rename’ option on the pop-up that appears.
**Step 3: Change M4A to M4R
With ‘File Name Extensions’ on, you can edit the file extension as well! Of course, this is not possible for all conversions. But, as mentioned, since M4A and M4R files are pretty much the same, you can do so without damaging the file!
Meaning, you can change M4A to M4R without worrying about it being unusable!
012. How to Convert M4A to M4R with iTunes
This process was already explained in Part 2, Section 2 of this article. But, since it’s important to provide this perspective we’ll be going through the process again. This time, with the intention of converting an M4A music file to an M4R!
**Step 1: Add File to iTunes Library!
First, add the M4A file to your iTunes library! (You can use the drag-and-drop feature or select ‘Add File’ or ‘Add folder’ under the ‘FILE’ tab).
**Step 2: Create to M4R!
Once your M4A audio file has been uploaded, make sure that it’s selected and then select ‘Create Version’ for it (the option can be found under the ‘FILE’ tab > ‘Convert’!)
**Step 3: Convert M4A to M4R
Once the version of the file has been created (which comes out as M4A), you can use the method we showed in Section 3, Part 1 of this article to change the M4A to M4R simply by rewriting the file extension name.
03How to Convert M4A to M4R Online
For this next part, we’ll be echoing another one of our earlier tutorials! Only, this time, we’ll be focusing on converting M4A to M4R online with an M4R converter online! Specifically, the one we introduced previously — Audio Tool Set!
**Step 1: Online M4R Converter
Audio Tool Set offers an M4A to M4R converter that you can select under the ‘CONVERT AUDIO’ tab!
**Step 2: Upload M4A File!
Once you’ve been moved to the free M4A to M4R converter, select the ‘UPLOAD M4A’ option to browse your PC for the M4A file that you want to convert.
**Step 3: Confirm M4R Conversion Format!
If you’re using the M4A to M4R Converter you can skip this step. But, if not, make sure that you have chosen ‘M4R’ as your desired conversion format!
**Step 4: Convert M4A to M4R!
With all of that in order, select ‘CONVERT’ to move forward.
**Step 5: Download Converted M4R!
Finally, with the conversion done, you can now download the converted file to use as you will! This can be done by selecting the ‘DOWNLOAD’ option!
04How to Create and How to Open an M4A File?
If you want detailed instructions on how to create an M4A file, please refer to Part 2, Section 2 of this article, or Part 3, Section 2. In both sections, we demonstrated how one can create an M4A file by using the ‘Create Version’ feature that iTunes offers.
In that same vein, if you want to be able to open an M4A file, iTunes is your best bet! Although, it should also be said that some of the more advanced media players (and audio players), like QuickTime or Media Player, can open M4A files as well!
05Which Other Formats M4A Can Be Converted into and Why?
There are numerous file formats that you can convert M4A into. If you want examples: you can convert M4A to M4R, MP3 to M4A, WAV to M4A, FLAC to M4A, OGG to M4A, WMA to M4A, and so much more! Of course, if you want more advanced M4A conversions, you might want to consider using a more advanced tool. One such M4A converter that we recommend is Filmora Pro!
Wondershare Filmora Video Editor is an all-in-one video editing software that will allow you to convert M4A to M4R (and all sorts of other audio and video file formats) so that you can make use of the file for all your projects! The best part of using a video editor like Filmora, of course, is that once you’ve converted the file, you can use it immediately — there’s no need to wait, you can finish your project right then and there, making it unnecessary for you to go searching for any other solution.
Wondershare Filmora - Best Video Editor for Mac/Windows
5,481,435 people have downloaded it.
Build unique custom animations without breaking a sweat.
Focus on creating epic stories and leave the details to Filmora’s auto features.
Start a creative adventure with drag & drop effects and endless possibilities.
Filmora simplifies advanced features to save you time and effort.
Filmora cuts out repetition so you can move on to your next creative breakthrough.
Key Takeaways from This Episode
● What’s the point of M4R Converters? Well, it’s most relevant to iOS users! Especially those who are tired of listening to the same boring tones on their phone over and over again!
● The M4R file format was created by Apple to differentiate music from ringtones. And, by becoming familiar with the process (which we’ve illustrated in many details in the article above), you can flex your creativity a bit and control just what tones are coming out of your phone!
● It’s not all that difficult to create M4Rs either! There are several methods that you can try — online, iTunes, third-party software, and so much more!
● And, you can make these ringtones from pretty much any format — whether you’re converting from MP3, MOV, WAV, FLAC, WMA, etc.
M4R is an audio file extension that was created by Apple to separate regular songs and audio from ringtones
As for methods of converting from your more general file extension formats to M4R, we’ve prepared a whole guide below — where we’ve outlined some of the more important things that you should know about M4R converters and how to use them.
In this article
01 [Why Convert Mp3 to M4R?](#Part 1)
02 [How to Convert Mp3 to M4R?](#Part 2)
03 [How to Convert M4A to M4R?](#Part 3)
Part 1 Why Convert MP3 to M4R?
Let’s start with a bit of an overview of M4R and M4R Converters first! We touched upon this subject in the introduction, but we thought it would be best to expand on the subject here for better understanding. First, let’s talk about what an M4R converter is usually like. Then, let’s talk about why someone might convert from MP3 to M4R.
01M4R Converter Key Features
Here’s a list of some key features that you should look for in an M4R Converter:
● Your average M4R Converter should allow you to convert to M4R from general audio files. That includes the following: MP3, WAV, WMA, AIFF, AMR, FLAC, MKA, WMV, and so much more.
● It should also allow you to ‘extract’ audio from videos (whether it is a MPEG-4, MOV, AVI, etc.)
● The M4R converter would prove even more useful if it allowed you to trim small segments of audio or video (with exact start and end time) so that you can specify which part should play as a ringtone.
● A method of previewing trimmed content prior to conversion would also be helpful so that you won’t have to undergo the process again and again.
● Its settings should also be adjustable or the interface intuitive, allowing you to easily choose or discover the output folder, adjust audio bitrate, and so on.
02Best Three Reasons Why Convert MP3 to M4R
There are several reasons why you might want to use an M4R converter to change from MP3 to M4R, these reasons include:
● Creating iPhone Ringtone: The main purpose of converting to M4R is, of course, to create iPhone ringtones. This file extension was created by Apple specifically to differentiate between songs and ringtones. And, if you’re a regular iOS user but are not a fan of the basic iOS ringtones, learning how to create M4R files would be beneficial in opening your horizons.
● Transfer Ringtones to iPhone: Of course, once the M4R is created for use, it would need to be transferred. This is much easier if it stays in this format!
● Making General M4R Audio: Although not as common, some users see the benefit of using M4R audio for other reasons (i.e., content creators sometimes use M4R audio as a sound-effect for videos). Thus, knowing how to convert from MP3 to MP4 usually proves to be useful for them.
Part 2 How to Convert Mp3 to M4R?
Now, let’s start with a more in-depth tutorial on how to actually convert MP3 to M4R! In this case, specifically, we’ll be providing three different examples. Starting with an online solution and then following it up with the general iTunes conversion and the more involved software conversion!
01How to Convert MP3 to M4R Online?
As mentioned, the first M4R Converter on this list is an online one! There are plenty of these kinds of online converter tools available, and they all pretty much work the same way, so the example we’ll be showing below is more of an all-purpose kind of affair. However, just in case you’re curious, the tool we’ll be using for our examples is the Converter from Audio Tool Set!
**Step 1: Visit Online Converter Website!
First! Open the M4R Converter online tool that you want to use! If you want to follow along with our examples, a URL has been provided for you below:
**Step 2: Upload MP3 File
Next, it’s time to upload the MP3 file that you want to convert to M4R!
Usually, all you have to do for this is click the ‘Upload’ button or drag-and-drop the file onto the specified area. But, in some cases, the M4R converter may also allow you to upload via a link or from cloud-based storage (i.e., Dropbox.)
**Step 3: Select M4R as Output Format!
Once your MP3 file has been uploaded, select the format that you want it to be converted into. This may have defaulted to M4R or you may be given the chance to choose yourself (as is shown in the image below.)
**Step 4: Select Convert!
The next thing you need to do is to simply select the ‘CONVERT’ option to begin processing the change from MP3 to M4R!
**Step 5: Download Converter M4R!
Once the conversion is done, you should now have been given the option to download the finished M4R. Click ‘DOWNLOAD’ and you’re done!
012. How to convert MP3 to M4R on iTunes?
Of course, as an Apple File Extension, it only makes sense that Apple provides its users an easy way to convert general audio to M4R! In this case, we’ll be showing you another method to convert from MP3 to M4R with Apple’s own iTunes! Of course, if you want to follow along with this next example, you’ll have to download and install the software (for Windows users) before proceeding.
**Step 1: Add File or Folder to Library!
Once you have iTunes installed, launch the program and go to ‘File’ > ‘Add File to Library’ or ‘Add Folder to Library’ to upload the MP3 file(s) that you want to convert to M4R!
**Step 2: Select MP3 and Adjust Timing!
Since M4R ringtones are limited to 40 seconds only, you’ll need to adjust timing prior to conversion if you want the ringtone to start and end at a specific time.
This is possible to do by selecting the song from your library and right clicking so you can access the ‘OPTIONS’ tab (shown below)! Under the Options tab, you’ll be able to specify the start and stop time for your chosen MP3!
Click ‘OK’ when done in order to save any changes!
**Step 3: Convert to Version!
Next, with the MP3 file still selected, go to the ‘FILE’ tab (shown in the image below) and then click ‘CONVERT’ > ‘Create Version’!
**Step 4: Go to the Destination Folder!
After the conversion has been finished, locate the file’s destination folder. You’ll notice that the file extension of the file is .M4A but this is easy enough to change.
Just rename the file extension to .M4R (example shown below) and click ‘YES’ to confirm the change! In this way, you’ve managed to convert MP3 to M4R with iTunes!
013. How to Convert MP3 to M4R Online Free with Ringtone Maker?
For this last example of converting MP3 to M4R, we’ve decided to show-off the ringtone maker, Wondershare TunesGo! This program is, of course, more than just a ringtone maker, but the function that we’ll be exploring will be the process of making an iPhone Ringtone from an MP3 file to an M4R (start to finish!)
**Step 1: Launch Program and Connect iPhone to Computer!
First, launch the M4R converter software on your desktop and connect your iPhone to your computer! If you want to use the program that we’re showing off in this example, the URL has been provided below:
**Step 2: Select Ringtone Maker
Once the program has been launched, go to the ‘MUSIC’ tab and select “Ringtone Maker” (pointed out in the image below.)
**Step 3: Select Music File!
A secondary window should appear after you select the ‘Ringtone Maker’ option. Here, the first thing you have to do is upload the music file that you want to convert.
For the software that we’re using as an example, you can choose to upload ‘Local Music’ from your computer or ‘Device Music’ from the music that you have stored in your connected iPhone. We’ll be explaining the different methods to select a music file in the three following steps!
**Step 4: Local Upload - Open!
If you select ‘Local Music’ a system window will appear asking you to select the music file that you want to convert to M4R. Do so and click ‘OPEN!’
**Step 5: Device Music - SELECT!
For the ‘Device Music’ option, another program window will appear. This time, with all the music on your device. You can select the music file you want to convert from here! Click ‘Select’ when done!
**Step 6: TunesGo Library!
For the last method of selecting a music file, all you have to do is select a file from the ‘MUSIC’ tab of TunesGo, right-click on said file, and then select ‘Ringtone Maker’ on the pop-up that appears (shown below).
**Step 7: Trim and Save!
Once you’ve chosen the music file you want to convert, you can now:
● Trim the file to specify which part of the file you want to convert (40 seconds only for a proper Ringtone!)
● Use the ‘Ringtone Audition’ option to preview your trimmed audio.
● And, finally, you can save the finished ringtone directly to your PC or Device!
In this way, not only have you managed to convert from MP3 to M4R cleanly, but you can also use it right away on either your PC or iPhone!
Part 3 How to Convert M4A to M4R?
Another Apple extension file that you might recognize is M4A! This was mentioned briefly in a previous tutorial, but it might be more familiar to others as ‘compressed’ Apple Music. This is what your audio becomes when processed through iTunes. It’s also known as MPEG-4 Audio, and its main purpose is to compress the size of an audio file (compared to MP3) without compromising the quality.
01How to convert M4A to M4R on Windows?
This process was mentioned briefly in Part 2, Section 3 of this article, but we’ll be going through the easiest method of converting M4A to M4R on Windows below! This method is possible only because the formats are pretty much the same. The only difference lies in how they are categorized.
**Step 1: View File Extensions!
The first step to convert M4A to M4R is to open the folder in which your M4A audio is stored. There, make sure that you have ‘File Name Extensions’ selected under the ‘VIEW’ tab (pointed out in the image below).
This will allow you to view and edit the file extension of a given file.
**Step 2: Rename M4A to M4R!
Next, select the M4A that you want to convert and right-click so that you can choose the ‘Rename’ option on the pop-up that appears.
**Step 3: Change M4A to M4R
With ‘File Name Extensions’ on, you can edit the file extension as well! Of course, this is not possible for all conversions. But, as mentioned, since M4A and M4R files are pretty much the same, you can do so without damaging the file!
Meaning, you can change M4A to M4R without worrying about it being unusable!
012. How to Convert M4A to M4R with iTunes
This process was already explained in Part 2, Section 2 of this article. But, since it’s important to provide this perspective we’ll be going through the process again. This time, with the intention of converting an M4A music file to an M4R!
**Step 1: Add File to iTunes Library!
First, add the M4A file to your iTunes library! (You can use the drag-and-drop feature or select ‘Add File’ or ‘Add folder’ under the ‘FILE’ tab).
**Step 2: Create to M4R!
Once your M4A audio file has been uploaded, make sure that it’s selected and then select ‘Create Version’ for it (the option can be found under the ‘FILE’ tab > ‘Convert’!)
**Step 3: Convert M4A to M4R
Once the version of the file has been created (which comes out as M4A), you can use the method we showed in Section 3, Part 1 of this article to change the M4A to M4R simply by rewriting the file extension name.
03How to Convert M4A to M4R Online
For this next part, we’ll be echoing another one of our earlier tutorials! Only, this time, we’ll be focusing on converting M4A to M4R online with an M4R converter online! Specifically, the one we introduced previously — Audio Tool Set!
**Step 1: Online M4R Converter
Audio Tool Set offers an M4A to M4R converter that you can select under the ‘CONVERT AUDIO’ tab!
**Step 2: Upload M4A File!
Once you’ve been moved to the free M4A to M4R converter, select the ‘UPLOAD M4A’ option to browse your PC for the M4A file that you want to convert.
**Step 3: Confirm M4R Conversion Format!
If you’re using the M4A to M4R Converter you can skip this step. But, if not, make sure that you have chosen ‘M4R’ as your desired conversion format!
**Step 4: Convert M4A to M4R!
With all of that in order, select ‘CONVERT’ to move forward.
**Step 5: Download Converted M4R!
Finally, with the conversion done, you can now download the converted file to use as you will! This can be done by selecting the ‘DOWNLOAD’ option!
04How to Create and How to Open an M4A File?
If you want detailed instructions on how to create an M4A file, please refer to Part 2, Section 2 of this article, or Part 3, Section 2. In both sections, we demonstrated how one can create an M4A file by using the ‘Create Version’ feature that iTunes offers.
In that same vein, if you want to be able to open an M4A file, iTunes is your best bet! Although, it should also be said that some of the more advanced media players (and audio players), like QuickTime or Media Player, can open M4A files as well!
05Which Other Formats M4A Can Be Converted into and Why?
There are numerous file formats that you can convert M4A into. If you want examples: you can convert M4A to M4R, MP3 to M4A, WAV to M4A, FLAC to M4A, OGG to M4A, WMA to M4A, and so much more! Of course, if you want more advanced M4A conversions, you might want to consider using a more advanced tool. One such M4A converter that we recommend is Filmora Pro!
Wondershare Filmora Video Editor is an all-in-one video editing software that will allow you to convert M4A to M4R (and all sorts of other audio and video file formats) so that you can make use of the file for all your projects! The best part of using a video editor like Filmora, of course, is that once you’ve converted the file, you can use it immediately — there’s no need to wait, you can finish your project right then and there, making it unnecessary for you to go searching for any other solution.
Wondershare Filmora - Best Video Editor for Mac/Windows
5,481,435 people have downloaded it.
Build unique custom animations without breaking a sweat.
Focus on creating epic stories and leave the details to Filmora’s auto features.
Start a creative adventure with drag & drop effects and endless possibilities.
Filmora simplifies advanced features to save you time and effort.
Filmora cuts out repetition so you can move on to your next creative breakthrough.
Key Takeaways from This Episode
● What’s the point of M4R Converters? Well, it’s most relevant to iOS users! Especially those who are tired of listening to the same boring tones on their phone over and over again!
● The M4R file format was created by Apple to differentiate music from ringtones. And, by becoming familiar with the process (which we’ve illustrated in many details in the article above), you can flex your creativity a bit and control just what tones are coming out of your phone!
● It’s not all that difficult to create M4Rs either! There are several methods that you can try — online, iTunes, third-party software, and so much more!
● And, you can make these ringtones from pretty much any format — whether you’re converting from MP3, MOV, WAV, FLAC, WMA, etc.
M4R is an audio file extension that was created by Apple to separate regular songs and audio from ringtones
As for methods of converting from your more general file extension formats to M4R, we’ve prepared a whole guide below — where we’ve outlined some of the more important things that you should know about M4R converters and how to use them.
In this article
01 [Why Convert Mp3 to M4R?](#Part 1)
02 [How to Convert Mp3 to M4R?](#Part 2)
03 [How to Convert M4A to M4R?](#Part 3)
Part 1 Why Convert MP3 to M4R?
Let’s start with a bit of an overview of M4R and M4R Converters first! We touched upon this subject in the introduction, but we thought it would be best to expand on the subject here for better understanding. First, let’s talk about what an M4R converter is usually like. Then, let’s talk about why someone might convert from MP3 to M4R.
01M4R Converter Key Features
Here’s a list of some key features that you should look for in an M4R Converter:
● Your average M4R Converter should allow you to convert to M4R from general audio files. That includes the following: MP3, WAV, WMA, AIFF, AMR, FLAC, MKA, WMV, and so much more.
● It should also allow you to ‘extract’ audio from videos (whether it is a MPEG-4, MOV, AVI, etc.)
● The M4R converter would prove even more useful if it allowed you to trim small segments of audio or video (with exact start and end time) so that you can specify which part should play as a ringtone.
● A method of previewing trimmed content prior to conversion would also be helpful so that you won’t have to undergo the process again and again.
● Its settings should also be adjustable or the interface intuitive, allowing you to easily choose or discover the output folder, adjust audio bitrate, and so on.
02Best Three Reasons Why Convert MP3 to M4R
There are several reasons why you might want to use an M4R converter to change from MP3 to M4R, these reasons include:
● Creating iPhone Ringtone: The main purpose of converting to M4R is, of course, to create iPhone ringtones. This file extension was created by Apple specifically to differentiate between songs and ringtones. And, if you’re a regular iOS user but are not a fan of the basic iOS ringtones, learning how to create M4R files would be beneficial in opening your horizons.
● Transfer Ringtones to iPhone: Of course, once the M4R is created for use, it would need to be transferred. This is much easier if it stays in this format!
● Making General M4R Audio: Although not as common, some users see the benefit of using M4R audio for other reasons (i.e., content creators sometimes use M4R audio as a sound-effect for videos). Thus, knowing how to convert from MP3 to MP4 usually proves to be useful for them.
Part 2 How to Convert Mp3 to M4R?
Now, let’s start with a more in-depth tutorial on how to actually convert MP3 to M4R! In this case, specifically, we’ll be providing three different examples. Starting with an online solution and then following it up with the general iTunes conversion and the more involved software conversion!
01How to Convert MP3 to M4R Online?
As mentioned, the first M4R Converter on this list is an online one! There are plenty of these kinds of online converter tools available, and they all pretty much work the same way, so the example we’ll be showing below is more of an all-purpose kind of affair. However, just in case you’re curious, the tool we’ll be using for our examples is the Converter from Audio Tool Set!
**Step 1: Visit Online Converter Website!
First! Open the M4R Converter online tool that you want to use! If you want to follow along with our examples, a URL has been provided for you below:
**Step 2: Upload MP3 File
Next, it’s time to upload the MP3 file that you want to convert to M4R!
Usually, all you have to do for this is click the ‘Upload’ button or drag-and-drop the file onto the specified area. But, in some cases, the M4R converter may also allow you to upload via a link or from cloud-based storage (i.e., Dropbox.)
**Step 3: Select M4R as Output Format!
Once your MP3 file has been uploaded, select the format that you want it to be converted into. This may have defaulted to M4R or you may be given the chance to choose yourself (as is shown in the image below.)
**Step 4: Select Convert!
The next thing you need to do is to simply select the ‘CONVERT’ option to begin processing the change from MP3 to M4R!
**Step 5: Download Converter M4R!
Once the conversion is done, you should now have been given the option to download the finished M4R. Click ‘DOWNLOAD’ and you’re done!
012. How to convert MP3 to M4R on iTunes?
Of course, as an Apple File Extension, it only makes sense that Apple provides its users an easy way to convert general audio to M4R! In this case, we’ll be showing you another method to convert from MP3 to M4R with Apple’s own iTunes! Of course, if you want to follow along with this next example, you’ll have to download and install the software (for Windows users) before proceeding.
**Step 1: Add File or Folder to Library!
Once you have iTunes installed, launch the program and go to ‘File’ > ‘Add File to Library’ or ‘Add Folder to Library’ to upload the MP3 file(s) that you want to convert to M4R!
**Step 2: Select MP3 and Adjust Timing!
Since M4R ringtones are limited to 40 seconds only, you’ll need to adjust timing prior to conversion if you want the ringtone to start and end at a specific time.
This is possible to do by selecting the song from your library and right clicking so you can access the ‘OPTIONS’ tab (shown below)! Under the Options tab, you’ll be able to specify the start and stop time for your chosen MP3!
Click ‘OK’ when done in order to save any changes!
**Step 3: Convert to Version!
Next, with the MP3 file still selected, go to the ‘FILE’ tab (shown in the image below) and then click ‘CONVERT’ > ‘Create Version’!
**Step 4: Go to the Destination Folder!
After the conversion has been finished, locate the file’s destination folder. You’ll notice that the file extension of the file is .M4A but this is easy enough to change.
Just rename the file extension to .M4R (example shown below) and click ‘YES’ to confirm the change! In this way, you’ve managed to convert MP3 to M4R with iTunes!
013. How to Convert MP3 to M4R Online Free with Ringtone Maker?
For this last example of converting MP3 to M4R, we’ve decided to show-off the ringtone maker, Wondershare TunesGo! This program is, of course, more than just a ringtone maker, but the function that we’ll be exploring will be the process of making an iPhone Ringtone from an MP3 file to an M4R (start to finish!)
**Step 1: Launch Program and Connect iPhone to Computer!
First, launch the M4R converter software on your desktop and connect your iPhone to your computer! If you want to use the program that we’re showing off in this example, the URL has been provided below:
**Step 2: Select Ringtone Maker
Once the program has been launched, go to the ‘MUSIC’ tab and select “Ringtone Maker” (pointed out in the image below.)
**Step 3: Select Music File!
A secondary window should appear after you select the ‘Ringtone Maker’ option. Here, the first thing you have to do is upload the music file that you want to convert.
For the software that we’re using as an example, you can choose to upload ‘Local Music’ from your computer or ‘Device Music’ from the music that you have stored in your connected iPhone. We’ll be explaining the different methods to select a music file in the three following steps!
**Step 4: Local Upload - Open!
If you select ‘Local Music’ a system window will appear asking you to select the music file that you want to convert to M4R. Do so and click ‘OPEN!’
**Step 5: Device Music - SELECT!
For the ‘Device Music’ option, another program window will appear. This time, with all the music on your device. You can select the music file you want to convert from here! Click ‘Select’ when done!
**Step 6: TunesGo Library!
For the last method of selecting a music file, all you have to do is select a file from the ‘MUSIC’ tab of TunesGo, right-click on said file, and then select ‘Ringtone Maker’ on the pop-up that appears (shown below).
**Step 7: Trim and Save!
Once you’ve chosen the music file you want to convert, you can now:
● Trim the file to specify which part of the file you want to convert (40 seconds only for a proper Ringtone!)
● Use the ‘Ringtone Audition’ option to preview your trimmed audio.
● And, finally, you can save the finished ringtone directly to your PC or Device!
In this way, not only have you managed to convert from MP3 to M4R cleanly, but you can also use it right away on either your PC or iPhone!
Part 3 How to Convert M4A to M4R?
Another Apple extension file that you might recognize is M4A! This was mentioned briefly in a previous tutorial, but it might be more familiar to others as ‘compressed’ Apple Music. This is what your audio becomes when processed through iTunes. It’s also known as MPEG-4 Audio, and its main purpose is to compress the size of an audio file (compared to MP3) without compromising the quality.
01How to convert M4A to M4R on Windows?
This process was mentioned briefly in Part 2, Section 3 of this article, but we’ll be going through the easiest method of converting M4A to M4R on Windows below! This method is possible only because the formats are pretty much the same. The only difference lies in how they are categorized.
**Step 1: View File Extensions!
The first step to convert M4A to M4R is to open the folder in which your M4A audio is stored. There, make sure that you have ‘File Name Extensions’ selected under the ‘VIEW’ tab (pointed out in the image below).
This will allow you to view and edit the file extension of a given file.
**Step 2: Rename M4A to M4R!
Next, select the M4A that you want to convert and right-click so that you can choose the ‘Rename’ option on the pop-up that appears.
**Step 3: Change M4A to M4R
With ‘File Name Extensions’ on, you can edit the file extension as well! Of course, this is not possible for all conversions. But, as mentioned, since M4A and M4R files are pretty much the same, you can do so without damaging the file!
Meaning, you can change M4A to M4R without worrying about it being unusable!
012. How to Convert M4A to M4R with iTunes
This process was already explained in Part 2, Section 2 of this article. But, since it’s important to provide this perspective we’ll be going through the process again. This time, with the intention of converting an M4A music file to an M4R!
**Step 1: Add File to iTunes Library!
First, add the M4A file to your iTunes library! (You can use the drag-and-drop feature or select ‘Add File’ or ‘Add folder’ under the ‘FILE’ tab).
**Step 2: Create to M4R!
Once your M4A audio file has been uploaded, make sure that it’s selected and then select ‘Create Version’ for it (the option can be found under the ‘FILE’ tab > ‘Convert’!)
**Step 3: Convert M4A to M4R
Once the version of the file has been created (which comes out as M4A), you can use the method we showed in Section 3, Part 1 of this article to change the M4A to M4R simply by rewriting the file extension name.
03How to Convert M4A to M4R Online
For this next part, we’ll be echoing another one of our earlier tutorials! Only, this time, we’ll be focusing on converting M4A to M4R online with an M4R converter online! Specifically, the one we introduced previously — Audio Tool Set!
**Step 1: Online M4R Converter
Audio Tool Set offers an M4A to M4R converter that you can select under the ‘CONVERT AUDIO’ tab!
**Step 2: Upload M4A File!
Once you’ve been moved to the free M4A to M4R converter, select the ‘UPLOAD M4A’ option to browse your PC for the M4A file that you want to convert.
**Step 3: Confirm M4R Conversion Format!
If you’re using the M4A to M4R Converter you can skip this step. But, if not, make sure that you have chosen ‘M4R’ as your desired conversion format!
**Step 4: Convert M4A to M4R!
With all of that in order, select ‘CONVERT’ to move forward.
**Step 5: Download Converted M4R!
Finally, with the conversion done, you can now download the converted file to use as you will! This can be done by selecting the ‘DOWNLOAD’ option!
04How to Create and How to Open an M4A File?
If you want detailed instructions on how to create an M4A file, please refer to Part 2, Section 2 of this article, or Part 3, Section 2. In both sections, we demonstrated how one can create an M4A file by using the ‘Create Version’ feature that iTunes offers.
In that same vein, if you want to be able to open an M4A file, iTunes is your best bet! Although, it should also be said that some of the more advanced media players (and audio players), like QuickTime or Media Player, can open M4A files as well!
05Which Other Formats M4A Can Be Converted into and Why?
There are numerous file formats that you can convert M4A into. If you want examples: you can convert M4A to M4R, MP3 to M4A, WAV to M4A, FLAC to M4A, OGG to M4A, WMA to M4A, and so much more! Of course, if you want more advanced M4A conversions, you might want to consider using a more advanced tool. One such M4A converter that we recommend is Filmora Pro!
Wondershare Filmora Video Editor is an all-in-one video editing software that will allow you to convert M4A to M4R (and all sorts of other audio and video file formats) so that you can make use of the file for all your projects! The best part of using a video editor like Filmora, of course, is that once you’ve converted the file, you can use it immediately — there’s no need to wait, you can finish your project right then and there, making it unnecessary for you to go searching for any other solution.
Wondershare Filmora - Best Video Editor for Mac/Windows
5,481,435 people have downloaded it.
Build unique custom animations without breaking a sweat.
Focus on creating epic stories and leave the details to Filmora’s auto features.
Start a creative adventure with drag & drop effects and endless possibilities.
Filmora simplifies advanced features to save you time and effort.
Filmora cuts out repetition so you can move on to your next creative breakthrough.
Key Takeaways from This Episode
● What’s the point of M4R Converters? Well, it’s most relevant to iOS users! Especially those who are tired of listening to the same boring tones on their phone over and over again!
● The M4R file format was created by Apple to differentiate music from ringtones. And, by becoming familiar with the process (which we’ve illustrated in many details in the article above), you can flex your creativity a bit and control just what tones are coming out of your phone!
● It’s not all that difficult to create M4Rs either! There are several methods that you can try — online, iTunes, third-party software, and so much more!
● And, you can make these ringtones from pretty much any format — whether you’re converting from MP3, MOV, WAV, FLAC, WMA, etc.
M4R is an audio file extension that was created by Apple to separate regular songs and audio from ringtones
As for methods of converting from your more general file extension formats to M4R, we’ve prepared a whole guide below — where we’ve outlined some of the more important things that you should know about M4R converters and how to use them.
In this article
01 [Why Convert Mp3 to M4R?](#Part 1)
02 [How to Convert Mp3 to M4R?](#Part 2)
03 [How to Convert M4A to M4R?](#Part 3)
Part 1 Why Convert MP3 to M4R?
Let’s start with a bit of an overview of M4R and M4R Converters first! We touched upon this subject in the introduction, but we thought it would be best to expand on the subject here for better understanding. First, let’s talk about what an M4R converter is usually like. Then, let’s talk about why someone might convert from MP3 to M4R.
01M4R Converter Key Features
Here’s a list of some key features that you should look for in an M4R Converter:
● Your average M4R Converter should allow you to convert to M4R from general audio files. That includes the following: MP3, WAV, WMA, AIFF, AMR, FLAC, MKA, WMV, and so much more.
● It should also allow you to ‘extract’ audio from videos (whether it is a MPEG-4, MOV, AVI, etc.)
● The M4R converter would prove even more useful if it allowed you to trim small segments of audio or video (with exact start and end time) so that you can specify which part should play as a ringtone.
● A method of previewing trimmed content prior to conversion would also be helpful so that you won’t have to undergo the process again and again.
● Its settings should also be adjustable or the interface intuitive, allowing you to easily choose or discover the output folder, adjust audio bitrate, and so on.
02Best Three Reasons Why Convert MP3 to M4R
There are several reasons why you might want to use an M4R converter to change from MP3 to M4R, these reasons include:
● Creating iPhone Ringtone: The main purpose of converting to M4R is, of course, to create iPhone ringtones. This file extension was created by Apple specifically to differentiate between songs and ringtones. And, if you’re a regular iOS user but are not a fan of the basic iOS ringtones, learning how to create M4R files would be beneficial in opening your horizons.
● Transfer Ringtones to iPhone: Of course, once the M4R is created for use, it would need to be transferred. This is much easier if it stays in this format!
● Making General M4R Audio: Although not as common, some users see the benefit of using M4R audio for other reasons (i.e., content creators sometimes use M4R audio as a sound-effect for videos). Thus, knowing how to convert from MP3 to MP4 usually proves to be useful for them.
Part 2 How to Convert Mp3 to M4R?
Now, let’s start with a more in-depth tutorial on how to actually convert MP3 to M4R! In this case, specifically, we’ll be providing three different examples. Starting with an online solution and then following it up with the general iTunes conversion and the more involved software conversion!
01How to Convert MP3 to M4R Online?
As mentioned, the first M4R Converter on this list is an online one! There are plenty of these kinds of online converter tools available, and they all pretty much work the same way, so the example we’ll be showing below is more of an all-purpose kind of affair. However, just in case you’re curious, the tool we’ll be using for our examples is the Converter from Audio Tool Set!
**Step 1: Visit Online Converter Website!
First! Open the M4R Converter online tool that you want to use! If you want to follow along with our examples, a URL has been provided for you below:
**Step 2: Upload MP3 File
Next, it’s time to upload the MP3 file that you want to convert to M4R!
Usually, all you have to do for this is click the ‘Upload’ button or drag-and-drop the file onto the specified area. But, in some cases, the M4R converter may also allow you to upload via a link or from cloud-based storage (i.e., Dropbox.)
**Step 3: Select M4R as Output Format!
Once your MP3 file has been uploaded, select the format that you want it to be converted into. This may have defaulted to M4R or you may be given the chance to choose yourself (as is shown in the image below.)
**Step 4: Select Convert!
The next thing you need to do is to simply select the ‘CONVERT’ option to begin processing the change from MP3 to M4R!
**Step 5: Download Converter M4R!
Once the conversion is done, you should now have been given the option to download the finished M4R. Click ‘DOWNLOAD’ and you’re done!
012. How to convert MP3 to M4R on iTunes?
Of course, as an Apple File Extension, it only makes sense that Apple provides its users an easy way to convert general audio to M4R! In this case, we’ll be showing you another method to convert from MP3 to M4R with Apple’s own iTunes! Of course, if you want to follow along with this next example, you’ll have to download and install the software (for Windows users) before proceeding.
**Step 1: Add File or Folder to Library!
Once you have iTunes installed, launch the program and go to ‘File’ > ‘Add File to Library’ or ‘Add Folder to Library’ to upload the MP3 file(s) that you want to convert to M4R!
**Step 2: Select MP3 and Adjust Timing!
Since M4R ringtones are limited to 40 seconds only, you’ll need to adjust timing prior to conversion if you want the ringtone to start and end at a specific time.
This is possible to do by selecting the song from your library and right clicking so you can access the ‘OPTIONS’ tab (shown below)! Under the Options tab, you’ll be able to specify the start and stop time for your chosen MP3!
Click ‘OK’ when done in order to save any changes!
**Step 3: Convert to Version!
Next, with the MP3 file still selected, go to the ‘FILE’ tab (shown in the image below) and then click ‘CONVERT’ > ‘Create Version’!
**Step 4: Go to the Destination Folder!
After the conversion has been finished, locate the file’s destination folder. You’ll notice that the file extension of the file is .M4A but this is easy enough to change.
Just rename the file extension to .M4R (example shown below) and click ‘YES’ to confirm the change! In this way, you’ve managed to convert MP3 to M4R with iTunes!
013. How to Convert MP3 to M4R Online Free with Ringtone Maker?
For this last example of converting MP3 to M4R, we’ve decided to show-off the ringtone maker, Wondershare TunesGo! This program is, of course, more than just a ringtone maker, but the function that we’ll be exploring will be the process of making an iPhone Ringtone from an MP3 file to an M4R (start to finish!)
**Step 1: Launch Program and Connect iPhone to Computer!
First, launch the M4R converter software on your desktop and connect your iPhone to your computer! If you want to use the program that we’re showing off in this example, the URL has been provided below:
**Step 2: Select Ringtone Maker
Once the program has been launched, go to the ‘MUSIC’ tab and select “Ringtone Maker” (pointed out in the image below.)
**Step 3: Select Music File!
A secondary window should appear after you select the ‘Ringtone Maker’ option. Here, the first thing you have to do is upload the music file that you want to convert.
For the software that we’re using as an example, you can choose to upload ‘Local Music’ from your computer or ‘Device Music’ from the music that you have stored in your connected iPhone. We’ll be explaining the different methods to select a music file in the three following steps!
**Step 4: Local Upload - Open!
If you select ‘Local Music’ a system window will appear asking you to select the music file that you want to convert to M4R. Do so and click ‘OPEN!’
**Step 5: Device Music - SELECT!
For the ‘Device Music’ option, another program window will appear. This time, with all the music on your device. You can select the music file you want to convert from here! Click ‘Select’ when done!
**Step 6: TunesGo Library!
For the last method of selecting a music file, all you have to do is select a file from the ‘MUSIC’ tab of TunesGo, right-click on said file, and then select ‘Ringtone Maker’ on the pop-up that appears (shown below).
**Step 7: Trim and Save!
Once you’ve chosen the music file you want to convert, you can now:
● Trim the file to specify which part of the file you want to convert (40 seconds only for a proper Ringtone!)
● Use the ‘Ringtone Audition’ option to preview your trimmed audio.
● And, finally, you can save the finished ringtone directly to your PC or Device!
In this way, not only have you managed to convert from MP3 to M4R cleanly, but you can also use it right away on either your PC or iPhone!
Part 3 How to Convert M4A to M4R?
Another Apple extension file that you might recognize is M4A! This was mentioned briefly in a previous tutorial, but it might be more familiar to others as ‘compressed’ Apple Music. This is what your audio becomes when processed through iTunes. It’s also known as MPEG-4 Audio, and its main purpose is to compress the size of an audio file (compared to MP3) without compromising the quality.
01How to convert M4A to M4R on Windows?
This process was mentioned briefly in Part 2, Section 3 of this article, but we’ll be going through the easiest method of converting M4A to M4R on Windows below! This method is possible only because the formats are pretty much the same. The only difference lies in how they are categorized.
**Step 1: View File Extensions!
The first step to convert M4A to M4R is to open the folder in which your M4A audio is stored. There, make sure that you have ‘File Name Extensions’ selected under the ‘VIEW’ tab (pointed out in the image below).
This will allow you to view and edit the file extension of a given file.
**Step 2: Rename M4A to M4R!
Next, select the M4A that you want to convert and right-click so that you can choose the ‘Rename’ option on the pop-up that appears.
**Step 3: Change M4A to M4R
With ‘File Name Extensions’ on, you can edit the file extension as well! Of course, this is not possible for all conversions. But, as mentioned, since M4A and M4R files are pretty much the same, you can do so without damaging the file!
Meaning, you can change M4A to M4R without worrying about it being unusable!
012. How to Convert M4A to M4R with iTunes
This process was already explained in Part 2, Section 2 of this article. But, since it’s important to provide this perspective we’ll be going through the process again. This time, with the intention of converting an M4A music file to an M4R!
**Step 1: Add File to iTunes Library!
First, add the M4A file to your iTunes library! (You can use the drag-and-drop feature or select ‘Add File’ or ‘Add folder’ under the ‘FILE’ tab).
**Step 2: Create to M4R!
Once your M4A audio file has been uploaded, make sure that it’s selected and then select ‘Create Version’ for it (the option can be found under the ‘FILE’ tab > ‘Convert’!)
**Step 3: Convert M4A to M4R
Once the version of the file has been created (which comes out as M4A), you can use the method we showed in Section 3, Part 1 of this article to change the M4A to M4R simply by rewriting the file extension name.
03How to Convert M4A to M4R Online
For this next part, we’ll be echoing another one of our earlier tutorials! Only, this time, we’ll be focusing on converting M4A to M4R online with an M4R converter online! Specifically, the one we introduced previously — Audio Tool Set!
**Step 1: Online M4R Converter
Audio Tool Set offers an M4A to M4R converter that you can select under the ‘CONVERT AUDIO’ tab!
**Step 2: Upload M4A File!
Once you’ve been moved to the free M4A to M4R converter, select the ‘UPLOAD M4A’ option to browse your PC for the M4A file that you want to convert.
**Step 3: Confirm M4R Conversion Format!
If you’re using the M4A to M4R Converter you can skip this step. But, if not, make sure that you have chosen ‘M4R’ as your desired conversion format!
**Step 4: Convert M4A to M4R!
With all of that in order, select ‘CONVERT’ to move forward.
**Step 5: Download Converted M4R!
Finally, with the conversion done, you can now download the converted file to use as you will! This can be done by selecting the ‘DOWNLOAD’ option!
04How to Create and How to Open an M4A File?
If you want detailed instructions on how to create an M4A file, please refer to Part 2, Section 2 of this article, or Part 3, Section 2. In both sections, we demonstrated how one can create an M4A file by using the ‘Create Version’ feature that iTunes offers.
In that same vein, if you want to be able to open an M4A file, iTunes is your best bet! Although, it should also be said that some of the more advanced media players (and audio players), like QuickTime or Media Player, can open M4A files as well!
05Which Other Formats M4A Can Be Converted into and Why?
There are numerous file formats that you can convert M4A into. If you want examples: you can convert M4A to M4R, MP3 to M4A, WAV to M4A, FLAC to M4A, OGG to M4A, WMA to M4A, and so much more! Of course, if you want more advanced M4A conversions, you might want to consider using a more advanced tool. One such M4A converter that we recommend is Filmora Pro!
Wondershare Filmora Video Editor is an all-in-one video editing software that will allow you to convert M4A to M4R (and all sorts of other audio and video file formats) so that you can make use of the file for all your projects! The best part of using a video editor like Filmora, of course, is that once you’ve converted the file, you can use it immediately — there’s no need to wait, you can finish your project right then and there, making it unnecessary for you to go searching for any other solution.
Wondershare Filmora - Best Video Editor for Mac/Windows
5,481,435 people have downloaded it.
Build unique custom animations without breaking a sweat.
Focus on creating epic stories and leave the details to Filmora’s auto features.
Start a creative adventure with drag & drop effects and endless possibilities.
Filmora simplifies advanced features to save you time and effort.
Filmora cuts out repetition so you can move on to your next creative breakthrough.
Key Takeaways from This Episode
● What’s the point of M4R Converters? Well, it’s most relevant to iOS users! Especially those who are tired of listening to the same boring tones on their phone over and over again!
● The M4R file format was created by Apple to differentiate music from ringtones. And, by becoming familiar with the process (which we’ve illustrated in many details in the article above), you can flex your creativity a bit and control just what tones are coming out of your phone!
● It’s not all that difficult to create M4Rs either! There are several methods that you can try — online, iTunes, third-party software, and so much more!
● And, you can make these ringtones from pretty much any format — whether you’re converting from MP3, MOV, WAV, FLAC, WMA, etc.
Get Started with Wax: A Free Video Editor for Stunning Videos
Wax - How to Use Free Video Editor Wax to Edit Videos
Ollie Mattison
Mar 27, 2024• Proven solutions
Wax is a light weight but high performance and flexible video editing, composition and special effects software. And above all, it’s a free video editor for both commercial and personal use. Wax can create 2D & 3D special effects and can work in two modes - as a standalone application and as a “plug-in” to video editors/NLEs like VirtualDub, Sony Vegas, Adobe Premiere, etc.
This is the getting-started tutorial for Wax. In this Wax tutorial, we are going to show you how to zoom, crop and pan video and image, how to make project settings and how to render AVI videos.
Note: If you think Wax is something complicated, you can turn to Wondershare Filmora , which enables you to edit videos with separate tracks and add transitions to your videos, finally, convert your video to any video format you like.Download the free trial version of Wondershare Filmora (originally Wondershare Video Editor) (Windows/Mac) below.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
1. Zoom, crop and pan image for video
Download Wax and install it first. Run the software and Load Media Files by right-clicking on MediaPool panel. But this doesn’t finish. To edit video, you need to drag-n-drop desired media files to the timeline. Then switch to Video Plugins to drag-n-drop Quick 3d plugin to the just added track.
As shown above, click the triangle next to Quick 3d, you would see many options such as Posx, Posz, Cropleft, Cropbottom, etc. Please see detailed instructions to make editing in Wax:
Zoom Video: Click the Posz clock icon to set Keyframming mode to Linear, and then change the value by hanging over mouse to ZEROs and drag to left/right.
Crop Video: Click the Cropleft/Croptop/Cropright/Cropbottom clock icon to set Keyframming mode to Linear, and then change the value by hanging over mouse to ZEROs and drag to left/right.
Pan Video: Click the Posx clock icon to set Keyframming mode to Linear, and then change the value by hanging over mouse to ZEROs and drag to left/right.
Note that you could preview the video while making settings in the top preview windows.
2. Make project settings
Press F3 or click the Project Settings button in the tool bar to bring up the dialog. There, specify the file name, save path and video options, including video dimensions, frame rate, and click OK.
3. Render AVI video
Click the green arrow button on the tool bar to start saving video to specified path in the project settings. A few minutes later, you will get the edited video.
To be concluded, this is just the beginning Wax tutorial. You will find more features while using it. Just download Wax and have a try.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Wax is a light weight but high performance and flexible video editing, composition and special effects software. And above all, it’s a free video editor for both commercial and personal use. Wax can create 2D & 3D special effects and can work in two modes - as a standalone application and as a “plug-in” to video editors/NLEs like VirtualDub, Sony Vegas, Adobe Premiere, etc.
This is the getting-started tutorial for Wax. In this Wax tutorial, we are going to show you how to zoom, crop and pan video and image, how to make project settings and how to render AVI videos.
Note: If you think Wax is something complicated, you can turn to Wondershare Filmora , which enables you to edit videos with separate tracks and add transitions to your videos, finally, convert your video to any video format you like.Download the free trial version of Wondershare Filmora (originally Wondershare Video Editor) (Windows/Mac) below.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
1. Zoom, crop and pan image for video
Download Wax and install it first. Run the software and Load Media Files by right-clicking on MediaPool panel. But this doesn’t finish. To edit video, you need to drag-n-drop desired media files to the timeline. Then switch to Video Plugins to drag-n-drop Quick 3d plugin to the just added track.
As shown above, click the triangle next to Quick 3d, you would see many options such as Posx, Posz, Cropleft, Cropbottom, etc. Please see detailed instructions to make editing in Wax:
Zoom Video: Click the Posz clock icon to set Keyframming mode to Linear, and then change the value by hanging over mouse to ZEROs and drag to left/right.
Crop Video: Click the Cropleft/Croptop/Cropright/Cropbottom clock icon to set Keyframming mode to Linear, and then change the value by hanging over mouse to ZEROs and drag to left/right.
Pan Video: Click the Posx clock icon to set Keyframming mode to Linear, and then change the value by hanging over mouse to ZEROs and drag to left/right.
Note that you could preview the video while making settings in the top preview windows.
2. Make project settings
Press F3 or click the Project Settings button in the tool bar to bring up the dialog. There, specify the file name, save path and video options, including video dimensions, frame rate, and click OK.
3. Render AVI video
Click the green arrow button on the tool bar to start saving video to specified path in the project settings. A few minutes later, you will get the edited video.
To be concluded, this is just the beginning Wax tutorial. You will find more features while using it. Just download Wax and have a try.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Wax is a light weight but high performance and flexible video editing, composition and special effects software. And above all, it’s a free video editor for both commercial and personal use. Wax can create 2D & 3D special effects and can work in two modes - as a standalone application and as a “plug-in” to video editors/NLEs like VirtualDub, Sony Vegas, Adobe Premiere, etc.
This is the getting-started tutorial for Wax. In this Wax tutorial, we are going to show you how to zoom, crop and pan video and image, how to make project settings and how to render AVI videos.
Note: If you think Wax is something complicated, you can turn to Wondershare Filmora , which enables you to edit videos with separate tracks and add transitions to your videos, finally, convert your video to any video format you like.Download the free trial version of Wondershare Filmora (originally Wondershare Video Editor) (Windows/Mac) below.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
1. Zoom, crop and pan image for video
Download Wax and install it first. Run the software and Load Media Files by right-clicking on MediaPool panel. But this doesn’t finish. To edit video, you need to drag-n-drop desired media files to the timeline. Then switch to Video Plugins to drag-n-drop Quick 3d plugin to the just added track.
As shown above, click the triangle next to Quick 3d, you would see many options such as Posx, Posz, Cropleft, Cropbottom, etc. Please see detailed instructions to make editing in Wax:
Zoom Video: Click the Posz clock icon to set Keyframming mode to Linear, and then change the value by hanging over mouse to ZEROs and drag to left/right.
Crop Video: Click the Cropleft/Croptop/Cropright/Cropbottom clock icon to set Keyframming mode to Linear, and then change the value by hanging over mouse to ZEROs and drag to left/right.
Pan Video: Click the Posx clock icon to set Keyframming mode to Linear, and then change the value by hanging over mouse to ZEROs and drag to left/right.
Note that you could preview the video while making settings in the top preview windows.
2. Make project settings
Press F3 or click the Project Settings button in the tool bar to bring up the dialog. There, specify the file name, save path and video options, including video dimensions, frame rate, and click OK.
3. Render AVI video
Click the green arrow button on the tool bar to start saving video to specified path in the project settings. A few minutes later, you will get the edited video.
To be concluded, this is just the beginning Wax tutorial. You will find more features while using it. Just download Wax and have a try.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Wax is a light weight but high performance and flexible video editing, composition and special effects software. And above all, it’s a free video editor for both commercial and personal use. Wax can create 2D & 3D special effects and can work in two modes - as a standalone application and as a “plug-in” to video editors/NLEs like VirtualDub, Sony Vegas, Adobe Premiere, etc.
This is the getting-started tutorial for Wax. In this Wax tutorial, we are going to show you how to zoom, crop and pan video and image, how to make project settings and how to render AVI videos.
Note: If you think Wax is something complicated, you can turn to Wondershare Filmora , which enables you to edit videos with separate tracks and add transitions to your videos, finally, convert your video to any video format you like.Download the free trial version of Wondershare Filmora (originally Wondershare Video Editor) (Windows/Mac) below.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
1. Zoom, crop and pan image for video
Download Wax and install it first. Run the software and Load Media Files by right-clicking on MediaPool panel. But this doesn’t finish. To edit video, you need to drag-n-drop desired media files to the timeline. Then switch to Video Plugins to drag-n-drop Quick 3d plugin to the just added track.
As shown above, click the triangle next to Quick 3d, you would see many options such as Posx, Posz, Cropleft, Cropbottom, etc. Please see detailed instructions to make editing in Wax:
Zoom Video: Click the Posz clock icon to set Keyframming mode to Linear, and then change the value by hanging over mouse to ZEROs and drag to left/right.
Crop Video: Click the Cropleft/Croptop/Cropright/Cropbottom clock icon to set Keyframming mode to Linear, and then change the value by hanging over mouse to ZEROs and drag to left/right.
Pan Video: Click the Posx clock icon to set Keyframming mode to Linear, and then change the value by hanging over mouse to ZEROs and drag to left/right.
Note that you could preview the video while making settings in the top preview windows.
2. Make project settings
Press F3 or click the Project Settings button in the tool bar to bring up the dialog. There, specify the file name, save path and video options, including video dimensions, frame rate, and click OK.
3. Render AVI video
Click the green arrow button on the tool bar to start saving video to specified path in the project settings. A few minutes later, you will get the edited video.
To be concluded, this is just the beginning Wax tutorial. You will find more features while using it. Just download Wax and have a try.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
10 Best Free Security Camera Software
10 Best Free Security Camera Software
Benjamin Arango
Mar 27, 2024• Proven solutions
Figuring out which is the best security camera software is never easy. This is because most of the software you find online says it is free…until you download their software and it tries to charge you.
Here is a review of the best security camera software, and every single one has a free option. Share this article on social media if you find the right camera software for you.
But if you are new in this field, then you might want to know some basic technique terms introduced following, before we jump to choose the best security camera software.
What Is an IP Camera?
When people say, “IP camera,” they usually mean a camera that uses the Internet in some way so that it may do its job. A typical CCTV camera connects a camera to a computer via a wire. An IP camera can connect over the Internet.
Sometimes, the connection is remote. This means that the camera may be in one location and still be connected to another computer that is miles away.
However, many IP cameras are installed in a home and only travel a few feet/meters to the nearest computer. In short, an IP camera doesn’t need a local recording device because the signal can be sent over the Internet or with a Wi-Fi connection.
What Is Camera Software Used for?
Most people and businesses use camera software to connect their cameras to their computers or their Smartphones. This is often cheaper than buying dedicated recording hardware. The camera and its software are usually used to monitor camera feeds that are life, and to records them onto a hard drive or to the Cloud.
How Do You Pick the Best Security Camera Software?
In most cases, the best software is simply the software that works with your cameras, and that offers all the functions you need. Compatibility is the first concern, but you also want it to work well with your device. For example, if your cameras have a zoom function, but your software doesn’t allow zooming, then that piece of software is not the best one for you.
For example, if you are using Linux, then you want Linux security camera software. And, some people insist that their software allows them to monitor their cameras from their Smartphones. The great thing about free security camera software is that you can test it out first without the risk of losing your money.
If You Need to Edit Your Videos , Which Is the Best Video Editor?
Exporting or downloading content from your camera software is a messy job. You often need a good video editor and trimmer to make your video clips usable.
This is especially true when video recordings can go on for as long as 90 days at a time. If you are looking for a high-quality and flexible video editor, then Filmora is your only real and viable choice. Learn more from Wondershare Video Community .
Filmora takes users’ needs into consideration and comes up with a variety of useful features to make editing easy for people of different levels. Let’s have a look at the useful features of Filmora to better understand how powerful Filmora is.
- Auto Synchronization: This allows you to sync video and audio easily.
- Plenty of transitions, effects, elements make your videos more interesting.
- Audio Ducking: Automatically reduce the volume of the background music to make the dialogue stand out.
- Wondershare Drive: Upload video or project to Wondershare Drive and download it to complete anywhere you want.
- Motion Tracking: Attach an element to a moving object in your video easily with auto motion tracking.
- Keyframing: Customize animation by adding keyframes to change the position, rotation, scale, and opacity of a clip.
- Color Match: Match the color of selected clips to another frame from another clip.
10 Best Free Security Camera Software
Now let’s have a look at the 10 best free security camera software with very comprehensive choosing details.
1. NetCam Studio
There is a free version of NetCam Studio, but if you want something more powerful, then you can buy one of their licenses. These licenses allow you to use the software for as long as you like, and they will update the software for up to two years after purchase.
After the two-year period, you can keep the software running as normal, but if you want upgrades, then you will have to buy them. Upgrades shouldn’t be needed unless you buy a new piece of camera hardware and it requires a new type of camera software.
The NetCam Studio Features
If you go for the free version of NetCam Studio, then you get to use a camera feed from two sources. There is a watermark added to the camera images, and you get five-day notifications. There is also community support.
The paid features include up to 64 sources, no watermarks, 250-day notifications, and you get priority support. After the 250 days is up, you may buy upgrades in order to keep the notification system going.
Pros
The free version does not expire in any way besides the notifications
You are able to use this software with a wide variety of camera brands
Updates are frequent enough to tackle most system-breaking bugs
Cons
The interface needs updating to make it more user friendly
They need to better explain the “Add Source” procedure
Troubleshooting audio problems is very difficult
2. Security Eye
The reason Security Eye ranks so highly is that it is a professional piece of software that somebody decided should be free. It is not open source security camera software, but the developers have decided that it should be free. There used to be a free version where you would get 2 hours of free surveillance per day for free, but in 2019 the company removed its payment system. Will they keep it up or go back to paid subscriptions? Who knows, but you should get it while it is still free (if you can).
Security Eye Features
You can use a timer to determine when the video feed should start. You can capture images as JPEGs and then compress them. The system also allows you to receive alerts via a loudspeaker. It works with motion-detection devices too.
Pros
It comes with the Xvid MPEG-4 Codec
The full version has no nag screen or recording limit
The Security Eye interface is pretty modern for what is essentially a free piece of software
Cons
Demands 1GB of RAM and 2GB of HHD space
Requires at least an Intel Pentium 1.8 processor
The icons should be more intuitive
3. Perfect Surveillance
There are three types of free security camera software for you to choose from. There is one for IP cameras, one for web cameras, and there is a piece of viewing software that people may use if they do not have something like VLC video viewer installed.
Perfect Surveillance Features
Simple icons and a clear interface is a great benefits. Determine when the cameras start monitoring and set up your own layouts to suit your viewing style.
Pros
A simple program that works in a very uncomplicated manner
Most of its icons are intuitive to where you can guess what they do
The Perfect Surveillance system has motion detection and allows you to monitor up to 64 devices
Cons
Installing seems overly long and bloated
There are not enough instructions on how to get your cameras connected
They do not explain how to capture and export screenshots
4. iVideon
There are times when a piece of free software simply does its job good enough to warrant no complaints, and that is exactly what iVideon offers. There are plenty of ways it can be improved, but there is nothing about it that demands harsh criticism.
iVideon Features
One of its most advertised features is facial recognition, but it is not very accurate. It does allow for very good mobile usage. You can view live and recorded footage on your desktop or mobile device. It is also available for Mac OS X and Linux.
Pros
Online home use and access is completely full-featured and freeware
It has smart notifications and has its own desktop and mobile apps
it doesn’t take long to learn how to use the iVideon interface
Cons
Seems rather light on features
Installing and connecting cameras requires a better tutorial
Embedding live video on your website is trickier than it first seems
5. Xeoma
This program has plenty of features, but most of them are locked off to free users. It takes over too long to learn how to use the system, but it may be worth it if you have many cameras. The paid version has all sorts of perks from SMS texts to system health monitoring.
Xeoma Features
The lite version is the free version. It allows you to add four cameras with up to six modules in each chain. You can test out and use the lite version as long as you like, or you can get a free trial of the larger fully-featured program.
Pros
Record and monitor from four cameras
Updates are very frequent
This software works with mostly every type of camera
Cons
Around 90% of features are locked off to free users.
Xeoma is difficult to learn and set up
Connecting many cameras is difficult because the system is difficult to learn as a whole
6. Genius Vision
The Genius Vision system is a fairly advanced piece of software that is probably best used for businesses. If used at home, then there are many features that may never be used. It also works on mobile devices too.
Genius Vision Features
There are plenty of features to play with, including a massive array of settings to fit the many types of camera that this program can be used with. You can even support the company through Patreon and get more extensions on the program.
Pros
Works in-depth with many types of camera
The tools are very sophisticated and accurate
The drop-down menus are complicated while also being thoughtfully laid out
Cons
Getting paid upgrades is trickier than just buying on their website
Setting up the remote features is difficult
You have to figure out most of how to use the program based on which camera you have connected
7. Deskshare IP Camera Viewer
The Deskshare IP Camera Viewer company has a great piece of security camera software that they repackage into many different names and then give away on their website. They do this because the software comes with lots of unwanted bloatware that the company is paid to promote. The sad part is that many other websites will replace this bloatware with Trojan viruses, which means it is difficult to get a clean version of this program.
Deskshare IP Camera Viewer Features
Live recording, playback, and split-screen is all available. You can use up to 4 cameras at a time, and it works with 2200 different camera models. If your hardware allows it, then you can pan, tilt and zoom your camera.
Pros
It is compatible with many types of camera brand
You can set up floating surveillance windows if you want
Adjust the properties of each camera individually
Cons
Installing is very difficult to do correctly
Comes with bloatware and/or unwanted content
The IP software has the least features of all the Deskshare camera software
8. Anycam
The Anycam system is a very average piece of software, but it works with most any type of camera. The interface is basic but easy to use and easy to set up. You will discover that the free version is only limited in terms of record time, you can still use all its features.
Anycam Features
Anycam is mostly featureless. It works with motion-detection cameras. It allows for video recording and playback. Plus, you can watch a live feed. Other than that, there is very little you can do with this basic-but-effective piece of software.
Pros
The program seems to work with any type of camera
Anycam has a paid version where you only make a one-time payment and get free lifetime updates
Installing and setup is very easy
Cons
Trying to find specific events on the timeline is very fiddly
The free version only allows two cameras to be linked
The recording is very limited with the free version
9. ContaCam
In the strictest terms, this piece of software is not free. The developers ask you for a donation, but there is nothing forcing you to give them one. Plus, you can try the software, and then if it turns out to be brilliant, then you can always go back and donate to them.
ContaCam Features
Despite seeming very complicated, the interface is actually very self-explanatory. At first glance, it looks overly condensed and full of features, but each explains itself very well. You can configure the cameras very precisely to the point where you can even specify within which seconds it starts and stops.
Pros
A rather advanced piece of software
The interface layout is very condensed without being confusing
You can use web servers, the Internet, or intranet to receive live feeds
Cons
The interface has no aesthetic decoration at all
ContaCam takes a long time to learn through trial and error testing
The developers say this will never work with mobile devices
10. Agent DVR
The great thing about Agent DVR is that it is completely free because it is freeware. The sad part is that it was created by a developer who went on to finer things and left the program lodged on a few high-use servers. It is now being passed around freeware websites, which means it is sometimes difficult to find a clean version. Nevertheless, it is a fine piece of camera software that still works for many types of cameras.
Agent DVR Features
The Agent DVR software allows for video surveillance with a live feed, and for recording. You can use it with motion-detection software, and it still works for many different types of cameras. It uses a reliable SSL algorithm for its signal encryption, and it is very lightweight, which means it is not a big drain on your device’s CPU.
Pros
A very simple and lightweight piece of software
Works all the way back to Windows 7
It still works with motion detection systems
Cons
Agent DVR will become more obsolete as newer cameras appear over the coming years
Updates will never occur beyond Windows 10
The interface looks very dated compared to the modern camera software
Conclusion
As you can tell by this article, getting good security camera software is difficult because there is so much to choose from. Plus, installing is often an issue, as is companies trying to nag-free users into paying. There is also the issue of connecting cameras and the problem with tagged-on viruses and bloatware.
Nevertheless, there is plenty to try without having to pay, so that is a positive. What do you think?
Have any of these worked for you? Ask your friends on social media, start a discussion, and share this article to help others discover the best free security camera software.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Figuring out which is the best security camera software is never easy. This is because most of the software you find online says it is free…until you download their software and it tries to charge you.
Here is a review of the best security camera software, and every single one has a free option. Share this article on social media if you find the right camera software for you.
But if you are new in this field, then you might want to know some basic technique terms introduced following, before we jump to choose the best security camera software.
What Is an IP Camera?
When people say, “IP camera,” they usually mean a camera that uses the Internet in some way so that it may do its job. A typical CCTV camera connects a camera to a computer via a wire. An IP camera can connect over the Internet.
Sometimes, the connection is remote. This means that the camera may be in one location and still be connected to another computer that is miles away.
However, many IP cameras are installed in a home and only travel a few feet/meters to the nearest computer. In short, an IP camera doesn’t need a local recording device because the signal can be sent over the Internet or with a Wi-Fi connection.
What Is Camera Software Used for?
Most people and businesses use camera software to connect their cameras to their computers or their Smartphones. This is often cheaper than buying dedicated recording hardware. The camera and its software are usually used to monitor camera feeds that are life, and to records them onto a hard drive or to the Cloud.
How Do You Pick the Best Security Camera Software?
In most cases, the best software is simply the software that works with your cameras, and that offers all the functions you need. Compatibility is the first concern, but you also want it to work well with your device. For example, if your cameras have a zoom function, but your software doesn’t allow zooming, then that piece of software is not the best one for you.
For example, if you are using Linux, then you want Linux security camera software. And, some people insist that their software allows them to monitor their cameras from their Smartphones. The great thing about free security camera software is that you can test it out first without the risk of losing your money.
If You Need to Edit Your Videos , Which Is the Best Video Editor?
Exporting or downloading content from your camera software is a messy job. You often need a good video editor and trimmer to make your video clips usable.
This is especially true when video recordings can go on for as long as 90 days at a time. If you are looking for a high-quality and flexible video editor, then Filmora is your only real and viable choice. Learn more from Wondershare Video Community .
Filmora takes users’ needs into consideration and comes up with a variety of useful features to make editing easy for people of different levels. Let’s have a look at the useful features of Filmora to better understand how powerful Filmora is.
- Auto Synchronization: This allows you to sync video and audio easily.
- Plenty of transitions, effects, elements make your videos more interesting.
- Audio Ducking: Automatically reduce the volume of the background music to make the dialogue stand out.
- Wondershare Drive: Upload video or project to Wondershare Drive and download it to complete anywhere you want.
- Motion Tracking: Attach an element to a moving object in your video easily with auto motion tracking.
- Keyframing: Customize animation by adding keyframes to change the position, rotation, scale, and opacity of a clip.
- Color Match: Match the color of selected clips to another frame from another clip.
10 Best Free Security Camera Software
Now let’s have a look at the 10 best free security camera software with very comprehensive choosing details.
1. NetCam Studio
There is a free version of NetCam Studio, but if you want something more powerful, then you can buy one of their licenses. These licenses allow you to use the software for as long as you like, and they will update the software for up to two years after purchase.
After the two-year period, you can keep the software running as normal, but if you want upgrades, then you will have to buy them. Upgrades shouldn’t be needed unless you buy a new piece of camera hardware and it requires a new type of camera software.
The NetCam Studio Features
If you go for the free version of NetCam Studio, then you get to use a camera feed from two sources. There is a watermark added to the camera images, and you get five-day notifications. There is also community support.
The paid features include up to 64 sources, no watermarks, 250-day notifications, and you get priority support. After the 250 days is up, you may buy upgrades in order to keep the notification system going.
Pros
The free version does not expire in any way besides the notifications
You are able to use this software with a wide variety of camera brands
Updates are frequent enough to tackle most system-breaking bugs
Cons
The interface needs updating to make it more user friendly
They need to better explain the “Add Source” procedure
Troubleshooting audio problems is very difficult
2. Security Eye
The reason Security Eye ranks so highly is that it is a professional piece of software that somebody decided should be free. It is not open source security camera software, but the developers have decided that it should be free. There used to be a free version where you would get 2 hours of free surveillance per day for free, but in 2019 the company removed its payment system. Will they keep it up or go back to paid subscriptions? Who knows, but you should get it while it is still free (if you can).
Security Eye Features
You can use a timer to determine when the video feed should start. You can capture images as JPEGs and then compress them. The system also allows you to receive alerts via a loudspeaker. It works with motion-detection devices too.
Pros
It comes with the Xvid MPEG-4 Codec
The full version has no nag screen or recording limit
The Security Eye interface is pretty modern for what is essentially a free piece of software
Cons
Demands 1GB of RAM and 2GB of HHD space
Requires at least an Intel Pentium 1.8 processor
The icons should be more intuitive
3. Perfect Surveillance
There are three types of free security camera software for you to choose from. There is one for IP cameras, one for web cameras, and there is a piece of viewing software that people may use if they do not have something like VLC video viewer installed.
Perfect Surveillance Features
Simple icons and a clear interface is a great benefits. Determine when the cameras start monitoring and set up your own layouts to suit your viewing style.
Pros
A simple program that works in a very uncomplicated manner
Most of its icons are intuitive to where you can guess what they do
The Perfect Surveillance system has motion detection and allows you to monitor up to 64 devices
Cons
Installing seems overly long and bloated
There are not enough instructions on how to get your cameras connected
They do not explain how to capture and export screenshots
4. iVideon
There are times when a piece of free software simply does its job good enough to warrant no complaints, and that is exactly what iVideon offers. There are plenty of ways it can be improved, but there is nothing about it that demands harsh criticism.
iVideon Features
One of its most advertised features is facial recognition, but it is not very accurate. It does allow for very good mobile usage. You can view live and recorded footage on your desktop or mobile device. It is also available for Mac OS X and Linux.
Pros
Online home use and access is completely full-featured and freeware
It has smart notifications and has its own desktop and mobile apps
it doesn’t take long to learn how to use the iVideon interface
Cons
Seems rather light on features
Installing and connecting cameras requires a better tutorial
Embedding live video on your website is trickier than it first seems
5. Xeoma
This program has plenty of features, but most of them are locked off to free users. It takes over too long to learn how to use the system, but it may be worth it if you have many cameras. The paid version has all sorts of perks from SMS texts to system health monitoring.
Xeoma Features
The lite version is the free version. It allows you to add four cameras with up to six modules in each chain. You can test out and use the lite version as long as you like, or you can get a free trial of the larger fully-featured program.
Pros
Record and monitor from four cameras
Updates are very frequent
This software works with mostly every type of camera
Cons
Around 90% of features are locked off to free users.
Xeoma is difficult to learn and set up
Connecting many cameras is difficult because the system is difficult to learn as a whole
6. Genius Vision
The Genius Vision system is a fairly advanced piece of software that is probably best used for businesses. If used at home, then there are many features that may never be used. It also works on mobile devices too.
Genius Vision Features
There are plenty of features to play with, including a massive array of settings to fit the many types of camera that this program can be used with. You can even support the company through Patreon and get more extensions on the program.
Pros
Works in-depth with many types of camera
The tools are very sophisticated and accurate
The drop-down menus are complicated while also being thoughtfully laid out
Cons
Getting paid upgrades is trickier than just buying on their website
Setting up the remote features is difficult
You have to figure out most of how to use the program based on which camera you have connected
7. Deskshare IP Camera Viewer
The Deskshare IP Camera Viewer company has a great piece of security camera software that they repackage into many different names and then give away on their website. They do this because the software comes with lots of unwanted bloatware that the company is paid to promote. The sad part is that many other websites will replace this bloatware with Trojan viruses, which means it is difficult to get a clean version of this program.
Deskshare IP Camera Viewer Features
Live recording, playback, and split-screen is all available. You can use up to 4 cameras at a time, and it works with 2200 different camera models. If your hardware allows it, then you can pan, tilt and zoom your camera.
Pros
It is compatible with many types of camera brand
You can set up floating surveillance windows if you want
Adjust the properties of each camera individually
Cons
Installing is very difficult to do correctly
Comes with bloatware and/or unwanted content
The IP software has the least features of all the Deskshare camera software
8. Anycam
The Anycam system is a very average piece of software, but it works with most any type of camera. The interface is basic but easy to use and easy to set up. You will discover that the free version is only limited in terms of record time, you can still use all its features.
Anycam Features
Anycam is mostly featureless. It works with motion-detection cameras. It allows for video recording and playback. Plus, you can watch a live feed. Other than that, there is very little you can do with this basic-but-effective piece of software.
Pros
The program seems to work with any type of camera
Anycam has a paid version where you only make a one-time payment and get free lifetime updates
Installing and setup is very easy
Cons
Trying to find specific events on the timeline is very fiddly
The free version only allows two cameras to be linked
The recording is very limited with the free version
9. ContaCam
In the strictest terms, this piece of software is not free. The developers ask you for a donation, but there is nothing forcing you to give them one. Plus, you can try the software, and then if it turns out to be brilliant, then you can always go back and donate to them.
ContaCam Features
Despite seeming very complicated, the interface is actually very self-explanatory. At first glance, it looks overly condensed and full of features, but each explains itself very well. You can configure the cameras very precisely to the point where you can even specify within which seconds it starts and stops.
Pros
A rather advanced piece of software
The interface layout is very condensed without being confusing
You can use web servers, the Internet, or intranet to receive live feeds
Cons
The interface has no aesthetic decoration at all
ContaCam takes a long time to learn through trial and error testing
The developers say this will never work with mobile devices
10. Agent DVR
The great thing about Agent DVR is that it is completely free because it is freeware. The sad part is that it was created by a developer who went on to finer things and left the program lodged on a few high-use servers. It is now being passed around freeware websites, which means it is sometimes difficult to find a clean version. Nevertheless, it is a fine piece of camera software that still works for many types of cameras.
Agent DVR Features
The Agent DVR software allows for video surveillance with a live feed, and for recording. You can use it with motion-detection software, and it still works for many different types of cameras. It uses a reliable SSL algorithm for its signal encryption, and it is very lightweight, which means it is not a big drain on your device’s CPU.
Pros
A very simple and lightweight piece of software
Works all the way back to Windows 7
It still works with motion detection systems
Cons
Agent DVR will become more obsolete as newer cameras appear over the coming years
Updates will never occur beyond Windows 10
The interface looks very dated compared to the modern camera software
Conclusion
As you can tell by this article, getting good security camera software is difficult because there is so much to choose from. Plus, installing is often an issue, as is companies trying to nag-free users into paying. There is also the issue of connecting cameras and the problem with tagged-on viruses and bloatware.
Nevertheless, there is plenty to try without having to pay, so that is a positive. What do you think?
Have any of these worked for you? Ask your friends on social media, start a discussion, and share this article to help others discover the best free security camera software.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Figuring out which is the best security camera software is never easy. This is because most of the software you find online says it is free…until you download their software and it tries to charge you.
Here is a review of the best security camera software, and every single one has a free option. Share this article on social media if you find the right camera software for you.
But if you are new in this field, then you might want to know some basic technique terms introduced following, before we jump to choose the best security camera software.
What Is an IP Camera?
When people say, “IP camera,” they usually mean a camera that uses the Internet in some way so that it may do its job. A typical CCTV camera connects a camera to a computer via a wire. An IP camera can connect over the Internet.
Sometimes, the connection is remote. This means that the camera may be in one location and still be connected to another computer that is miles away.
However, many IP cameras are installed in a home and only travel a few feet/meters to the nearest computer. In short, an IP camera doesn’t need a local recording device because the signal can be sent over the Internet or with a Wi-Fi connection.
What Is Camera Software Used for?
Most people and businesses use camera software to connect their cameras to their computers or their Smartphones. This is often cheaper than buying dedicated recording hardware. The camera and its software are usually used to monitor camera feeds that are life, and to records them onto a hard drive or to the Cloud.
How Do You Pick the Best Security Camera Software?
In most cases, the best software is simply the software that works with your cameras, and that offers all the functions you need. Compatibility is the first concern, but you also want it to work well with your device. For example, if your cameras have a zoom function, but your software doesn’t allow zooming, then that piece of software is not the best one for you.
For example, if you are using Linux, then you want Linux security camera software. And, some people insist that their software allows them to monitor their cameras from their Smartphones. The great thing about free security camera software is that you can test it out first without the risk of losing your money.
If You Need to Edit Your Videos , Which Is the Best Video Editor?
Exporting or downloading content from your camera software is a messy job. You often need a good video editor and trimmer to make your video clips usable.
This is especially true when video recordings can go on for as long as 90 days at a time. If you are looking for a high-quality and flexible video editor, then Filmora is your only real and viable choice. Learn more from Wondershare Video Community .
Filmora takes users’ needs into consideration and comes up with a variety of useful features to make editing easy for people of different levels. Let’s have a look at the useful features of Filmora to better understand how powerful Filmora is.
- Auto Synchronization: This allows you to sync video and audio easily.
- Plenty of transitions, effects, elements make your videos more interesting.
- Audio Ducking: Automatically reduce the volume of the background music to make the dialogue stand out.
- Wondershare Drive: Upload video or project to Wondershare Drive and download it to complete anywhere you want.
- Motion Tracking: Attach an element to a moving object in your video easily with auto motion tracking.
- Keyframing: Customize animation by adding keyframes to change the position, rotation, scale, and opacity of a clip.
- Color Match: Match the color of selected clips to another frame from another clip.
10 Best Free Security Camera Software
Now let’s have a look at the 10 best free security camera software with very comprehensive choosing details.
1. NetCam Studio
There is a free version of NetCam Studio, but if you want something more powerful, then you can buy one of their licenses. These licenses allow you to use the software for as long as you like, and they will update the software for up to two years after purchase.
After the two-year period, you can keep the software running as normal, but if you want upgrades, then you will have to buy them. Upgrades shouldn’t be needed unless you buy a new piece of camera hardware and it requires a new type of camera software.
The NetCam Studio Features
If you go for the free version of NetCam Studio, then you get to use a camera feed from two sources. There is a watermark added to the camera images, and you get five-day notifications. There is also community support.
The paid features include up to 64 sources, no watermarks, 250-day notifications, and you get priority support. After the 250 days is up, you may buy upgrades in order to keep the notification system going.
Pros
The free version does not expire in any way besides the notifications
You are able to use this software with a wide variety of camera brands
Updates are frequent enough to tackle most system-breaking bugs
Cons
The interface needs updating to make it more user friendly
They need to better explain the “Add Source” procedure
Troubleshooting audio problems is very difficult
2. Security Eye
The reason Security Eye ranks so highly is that it is a professional piece of software that somebody decided should be free. It is not open source security camera software, but the developers have decided that it should be free. There used to be a free version where you would get 2 hours of free surveillance per day for free, but in 2019 the company removed its payment system. Will they keep it up or go back to paid subscriptions? Who knows, but you should get it while it is still free (if you can).
Security Eye Features
You can use a timer to determine when the video feed should start. You can capture images as JPEGs and then compress them. The system also allows you to receive alerts via a loudspeaker. It works with motion-detection devices too.
Pros
It comes with the Xvid MPEG-4 Codec
The full version has no nag screen or recording limit
The Security Eye interface is pretty modern for what is essentially a free piece of software
Cons
Demands 1GB of RAM and 2GB of HHD space
Requires at least an Intel Pentium 1.8 processor
The icons should be more intuitive
3. Perfect Surveillance
There are three types of free security camera software for you to choose from. There is one for IP cameras, one for web cameras, and there is a piece of viewing software that people may use if they do not have something like VLC video viewer installed.
Perfect Surveillance Features
Simple icons and a clear interface is a great benefits. Determine when the cameras start monitoring and set up your own layouts to suit your viewing style.
Pros
A simple program that works in a very uncomplicated manner
Most of its icons are intuitive to where you can guess what they do
The Perfect Surveillance system has motion detection and allows you to monitor up to 64 devices
Cons
Installing seems overly long and bloated
There are not enough instructions on how to get your cameras connected
They do not explain how to capture and export screenshots
4. iVideon
There are times when a piece of free software simply does its job good enough to warrant no complaints, and that is exactly what iVideon offers. There are plenty of ways it can be improved, but there is nothing about it that demands harsh criticism.
iVideon Features
One of its most advertised features is facial recognition, but it is not very accurate. It does allow for very good mobile usage. You can view live and recorded footage on your desktop or mobile device. It is also available for Mac OS X and Linux.
Pros
Online home use and access is completely full-featured and freeware
It has smart notifications and has its own desktop and mobile apps
it doesn’t take long to learn how to use the iVideon interface
Cons
Seems rather light on features
Installing and connecting cameras requires a better tutorial
Embedding live video on your website is trickier than it first seems
5. Xeoma
This program has plenty of features, but most of them are locked off to free users. It takes over too long to learn how to use the system, but it may be worth it if you have many cameras. The paid version has all sorts of perks from SMS texts to system health monitoring.
Xeoma Features
The lite version is the free version. It allows you to add four cameras with up to six modules in each chain. You can test out and use the lite version as long as you like, or you can get a free trial of the larger fully-featured program.
Pros
Record and monitor from four cameras
Updates are very frequent
This software works with mostly every type of camera
Cons
Around 90% of features are locked off to free users.
Xeoma is difficult to learn and set up
Connecting many cameras is difficult because the system is difficult to learn as a whole
6. Genius Vision
The Genius Vision system is a fairly advanced piece of software that is probably best used for businesses. If used at home, then there are many features that may never be used. It also works on mobile devices too.
Genius Vision Features
There are plenty of features to play with, including a massive array of settings to fit the many types of camera that this program can be used with. You can even support the company through Patreon and get more extensions on the program.
Pros
Works in-depth with many types of camera
The tools are very sophisticated and accurate
The drop-down menus are complicated while also being thoughtfully laid out
Cons
Getting paid upgrades is trickier than just buying on their website
Setting up the remote features is difficult
You have to figure out most of how to use the program based on which camera you have connected
7. Deskshare IP Camera Viewer
The Deskshare IP Camera Viewer company has a great piece of security camera software that they repackage into many different names and then give away on their website. They do this because the software comes with lots of unwanted bloatware that the company is paid to promote. The sad part is that many other websites will replace this bloatware with Trojan viruses, which means it is difficult to get a clean version of this program.
Deskshare IP Camera Viewer Features
Live recording, playback, and split-screen is all available. You can use up to 4 cameras at a time, and it works with 2200 different camera models. If your hardware allows it, then you can pan, tilt and zoom your camera.
Pros
It is compatible with many types of camera brand
You can set up floating surveillance windows if you want
Adjust the properties of each camera individually
Cons
Installing is very difficult to do correctly
Comes with bloatware and/or unwanted content
The IP software has the least features of all the Deskshare camera software
8. Anycam
The Anycam system is a very average piece of software, but it works with most any type of camera. The interface is basic but easy to use and easy to set up. You will discover that the free version is only limited in terms of record time, you can still use all its features.
Anycam Features
Anycam is mostly featureless. It works with motion-detection cameras. It allows for video recording and playback. Plus, you can watch a live feed. Other than that, there is very little you can do with this basic-but-effective piece of software.
Pros
The program seems to work with any type of camera
Anycam has a paid version where you only make a one-time payment and get free lifetime updates
Installing and setup is very easy
Cons
Trying to find specific events on the timeline is very fiddly
The free version only allows two cameras to be linked
The recording is very limited with the free version
9. ContaCam
In the strictest terms, this piece of software is not free. The developers ask you for a donation, but there is nothing forcing you to give them one. Plus, you can try the software, and then if it turns out to be brilliant, then you can always go back and donate to them.
ContaCam Features
Despite seeming very complicated, the interface is actually very self-explanatory. At first glance, it looks overly condensed and full of features, but each explains itself very well. You can configure the cameras very precisely to the point where you can even specify within which seconds it starts and stops.
Pros
A rather advanced piece of software
The interface layout is very condensed without being confusing
You can use web servers, the Internet, or intranet to receive live feeds
Cons
The interface has no aesthetic decoration at all
ContaCam takes a long time to learn through trial and error testing
The developers say this will never work with mobile devices
10. Agent DVR
The great thing about Agent DVR is that it is completely free because it is freeware. The sad part is that it was created by a developer who went on to finer things and left the program lodged on a few high-use servers. It is now being passed around freeware websites, which means it is sometimes difficult to find a clean version. Nevertheless, it is a fine piece of camera software that still works for many types of cameras.
Agent DVR Features
The Agent DVR software allows for video surveillance with a live feed, and for recording. You can use it with motion-detection software, and it still works for many different types of cameras. It uses a reliable SSL algorithm for its signal encryption, and it is very lightweight, which means it is not a big drain on your device’s CPU.
Pros
A very simple and lightweight piece of software
Works all the way back to Windows 7
It still works with motion detection systems
Cons
Agent DVR will become more obsolete as newer cameras appear over the coming years
Updates will never occur beyond Windows 10
The interface looks very dated compared to the modern camera software
Conclusion
As you can tell by this article, getting good security camera software is difficult because there is so much to choose from. Plus, installing is often an issue, as is companies trying to nag-free users into paying. There is also the issue of connecting cameras and the problem with tagged-on viruses and bloatware.
Nevertheless, there is plenty to try without having to pay, so that is a positive. What do you think?
Have any of these worked for you? Ask your friends on social media, start a discussion, and share this article to help others discover the best free security camera software.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Figuring out which is the best security camera software is never easy. This is because most of the software you find online says it is free…until you download their software and it tries to charge you.
Here is a review of the best security camera software, and every single one has a free option. Share this article on social media if you find the right camera software for you.
But if you are new in this field, then you might want to know some basic technique terms introduced following, before we jump to choose the best security camera software.
What Is an IP Camera?
When people say, “IP camera,” they usually mean a camera that uses the Internet in some way so that it may do its job. A typical CCTV camera connects a camera to a computer via a wire. An IP camera can connect over the Internet.
Sometimes, the connection is remote. This means that the camera may be in one location and still be connected to another computer that is miles away.
However, many IP cameras are installed in a home and only travel a few feet/meters to the nearest computer. In short, an IP camera doesn’t need a local recording device because the signal can be sent over the Internet or with a Wi-Fi connection.
What Is Camera Software Used for?
Most people and businesses use camera software to connect their cameras to their computers or their Smartphones. This is often cheaper than buying dedicated recording hardware. The camera and its software are usually used to monitor camera feeds that are life, and to records them onto a hard drive or to the Cloud.
How Do You Pick the Best Security Camera Software?
In most cases, the best software is simply the software that works with your cameras, and that offers all the functions you need. Compatibility is the first concern, but you also want it to work well with your device. For example, if your cameras have a zoom function, but your software doesn’t allow zooming, then that piece of software is not the best one for you.
For example, if you are using Linux, then you want Linux security camera software. And, some people insist that their software allows them to monitor their cameras from their Smartphones. The great thing about free security camera software is that you can test it out first without the risk of losing your money.
If You Need to Edit Your Videos , Which Is the Best Video Editor?
Exporting or downloading content from your camera software is a messy job. You often need a good video editor and trimmer to make your video clips usable.
This is especially true when video recordings can go on for as long as 90 days at a time. If you are looking for a high-quality and flexible video editor, then Filmora is your only real and viable choice. Learn more from Wondershare Video Community .
Filmora takes users’ needs into consideration and comes up with a variety of useful features to make editing easy for people of different levels. Let’s have a look at the useful features of Filmora to better understand how powerful Filmora is.
- Auto Synchronization: This allows you to sync video and audio easily.
- Plenty of transitions, effects, elements make your videos more interesting.
- Audio Ducking: Automatically reduce the volume of the background music to make the dialogue stand out.
- Wondershare Drive: Upload video or project to Wondershare Drive and download it to complete anywhere you want.
- Motion Tracking: Attach an element to a moving object in your video easily with auto motion tracking.
- Keyframing: Customize animation by adding keyframes to change the position, rotation, scale, and opacity of a clip.
- Color Match: Match the color of selected clips to another frame from another clip.
10 Best Free Security Camera Software
Now let’s have a look at the 10 best free security camera software with very comprehensive choosing details.
1. NetCam Studio
There is a free version of NetCam Studio, but if you want something more powerful, then you can buy one of their licenses. These licenses allow you to use the software for as long as you like, and they will update the software for up to two years after purchase.
After the two-year period, you can keep the software running as normal, but if you want upgrades, then you will have to buy them. Upgrades shouldn’t be needed unless you buy a new piece of camera hardware and it requires a new type of camera software.
The NetCam Studio Features
If you go for the free version of NetCam Studio, then you get to use a camera feed from two sources. There is a watermark added to the camera images, and you get five-day notifications. There is also community support.
The paid features include up to 64 sources, no watermarks, 250-day notifications, and you get priority support. After the 250 days is up, you may buy upgrades in order to keep the notification system going.
Pros
The free version does not expire in any way besides the notifications
You are able to use this software with a wide variety of camera brands
Updates are frequent enough to tackle most system-breaking bugs
Cons
The interface needs updating to make it more user friendly
They need to better explain the “Add Source” procedure
Troubleshooting audio problems is very difficult
2. Security Eye
The reason Security Eye ranks so highly is that it is a professional piece of software that somebody decided should be free. It is not open source security camera software, but the developers have decided that it should be free. There used to be a free version where you would get 2 hours of free surveillance per day for free, but in 2019 the company removed its payment system. Will they keep it up or go back to paid subscriptions? Who knows, but you should get it while it is still free (if you can).
Security Eye Features
You can use a timer to determine when the video feed should start. You can capture images as JPEGs and then compress them. The system also allows you to receive alerts via a loudspeaker. It works with motion-detection devices too.
Pros
It comes with the Xvid MPEG-4 Codec
The full version has no nag screen or recording limit
The Security Eye interface is pretty modern for what is essentially a free piece of software
Cons
Demands 1GB of RAM and 2GB of HHD space
Requires at least an Intel Pentium 1.8 processor
The icons should be more intuitive
3. Perfect Surveillance
There are three types of free security camera software for you to choose from. There is one for IP cameras, one for web cameras, and there is a piece of viewing software that people may use if they do not have something like VLC video viewer installed.
Perfect Surveillance Features
Simple icons and a clear interface is a great benefits. Determine when the cameras start monitoring and set up your own layouts to suit your viewing style.
Pros
A simple program that works in a very uncomplicated manner
Most of its icons are intuitive to where you can guess what they do
The Perfect Surveillance system has motion detection and allows you to monitor up to 64 devices
Cons
Installing seems overly long and bloated
There are not enough instructions on how to get your cameras connected
They do not explain how to capture and export screenshots
4. iVideon
There are times when a piece of free software simply does its job good enough to warrant no complaints, and that is exactly what iVideon offers. There are plenty of ways it can be improved, but there is nothing about it that demands harsh criticism.
iVideon Features
One of its most advertised features is facial recognition, but it is not very accurate. It does allow for very good mobile usage. You can view live and recorded footage on your desktop or mobile device. It is also available for Mac OS X and Linux.
Pros
Online home use and access is completely full-featured and freeware
It has smart notifications and has its own desktop and mobile apps
it doesn’t take long to learn how to use the iVideon interface
Cons
Seems rather light on features
Installing and connecting cameras requires a better tutorial
Embedding live video on your website is trickier than it first seems
5. Xeoma
This program has plenty of features, but most of them are locked off to free users. It takes over too long to learn how to use the system, but it may be worth it if you have many cameras. The paid version has all sorts of perks from SMS texts to system health monitoring.
Xeoma Features
The lite version is the free version. It allows you to add four cameras with up to six modules in each chain. You can test out and use the lite version as long as you like, or you can get a free trial of the larger fully-featured program.
Pros
Record and monitor from four cameras
Updates are very frequent
This software works with mostly every type of camera
Cons
Around 90% of features are locked off to free users.
Xeoma is difficult to learn and set up
Connecting many cameras is difficult because the system is difficult to learn as a whole
6. Genius Vision
The Genius Vision system is a fairly advanced piece of software that is probably best used for businesses. If used at home, then there are many features that may never be used. It also works on mobile devices too.
Genius Vision Features
There are plenty of features to play with, including a massive array of settings to fit the many types of camera that this program can be used with. You can even support the company through Patreon and get more extensions on the program.
Pros
Works in-depth with many types of camera
The tools are very sophisticated and accurate
The drop-down menus are complicated while also being thoughtfully laid out
Cons
Getting paid upgrades is trickier than just buying on their website
Setting up the remote features is difficult
You have to figure out most of how to use the program based on which camera you have connected
7. Deskshare IP Camera Viewer
The Deskshare IP Camera Viewer company has a great piece of security camera software that they repackage into many different names and then give away on their website. They do this because the software comes with lots of unwanted bloatware that the company is paid to promote. The sad part is that many other websites will replace this bloatware with Trojan viruses, which means it is difficult to get a clean version of this program.
Deskshare IP Camera Viewer Features
Live recording, playback, and split-screen is all available. You can use up to 4 cameras at a time, and it works with 2200 different camera models. If your hardware allows it, then you can pan, tilt and zoom your camera.
Pros
It is compatible with many types of camera brand
You can set up floating surveillance windows if you want
Adjust the properties of each camera individually
Cons
Installing is very difficult to do correctly
Comes with bloatware and/or unwanted content
The IP software has the least features of all the Deskshare camera software
8. Anycam
The Anycam system is a very average piece of software, but it works with most any type of camera. The interface is basic but easy to use and easy to set up. You will discover that the free version is only limited in terms of record time, you can still use all its features.
Anycam Features
Anycam is mostly featureless. It works with motion-detection cameras. It allows for video recording and playback. Plus, you can watch a live feed. Other than that, there is very little you can do with this basic-but-effective piece of software.
Pros
The program seems to work with any type of camera
Anycam has a paid version where you only make a one-time payment and get free lifetime updates
Installing and setup is very easy
Cons
Trying to find specific events on the timeline is very fiddly
The free version only allows two cameras to be linked
The recording is very limited with the free version
9. ContaCam
In the strictest terms, this piece of software is not free. The developers ask you for a donation, but there is nothing forcing you to give them one. Plus, you can try the software, and then if it turns out to be brilliant, then you can always go back and donate to them.
ContaCam Features
Despite seeming very complicated, the interface is actually very self-explanatory. At first glance, it looks overly condensed and full of features, but each explains itself very well. You can configure the cameras very precisely to the point where you can even specify within which seconds it starts and stops.
Pros
A rather advanced piece of software
The interface layout is very condensed without being confusing
You can use web servers, the Internet, or intranet to receive live feeds
Cons
The interface has no aesthetic decoration at all
ContaCam takes a long time to learn through trial and error testing
The developers say this will never work with mobile devices
10. Agent DVR
The great thing about Agent DVR is that it is completely free because it is freeware. The sad part is that it was created by a developer who went on to finer things and left the program lodged on a few high-use servers. It is now being passed around freeware websites, which means it is sometimes difficult to find a clean version. Nevertheless, it is a fine piece of camera software that still works for many types of cameras.
Agent DVR Features
The Agent DVR software allows for video surveillance with a live feed, and for recording. You can use it with motion-detection software, and it still works for many different types of cameras. It uses a reliable SSL algorithm for its signal encryption, and it is very lightweight, which means it is not a big drain on your device’s CPU.
Pros
A very simple and lightweight piece of software
Works all the way back to Windows 7
It still works with motion detection systems
Cons
Agent DVR will become more obsolete as newer cameras appear over the coming years
Updates will never occur beyond Windows 10
The interface looks very dated compared to the modern camera software
Conclusion
As you can tell by this article, getting good security camera software is difficult because there is so much to choose from. Plus, installing is often an issue, as is companies trying to nag-free users into paying. There is also the issue of connecting cameras and the problem with tagged-on viruses and bloatware.
Nevertheless, there is plenty to try without having to pay, so that is a positive. What do you think?
Have any of these worked for you? Ask your friends on social media, start a discussion, and share this article to help others discover the best free security camera software.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Slow Down Time: Adding Slow Motion Effects in Windows Live Movie Maker
How to Use Windows Live Movie Maker Slow Motion Effect
Ollie Mattison
Mar 27, 2024• Proven solutions
Slow motion effect is one of the most popular video effects. Fortunately, Windows Live Movie Maker provides this useful function for you to slow down your videos either for better presentation or better video effect. It is very easy to use Windows Live Movie Maker slow motion function. Just get Windows Live Movie Maker installed and follow the below guide to use slow motion effect in Windows Live Movie Maker.
How to slow down videos in Windows Live Movie Maker
Step 1. Add photos and videos to Windows Live Movie Maker
Click “Add videos and photos” to browse and select videos and photos from you computer to add. You can also drag and drop videos and photos to the storyboard.
Step 2. Slow down videos in Windows Live Movie Maker
To slow down videos, select the video clip and on the Edit tab under “Video Tools” choose a speed (depending on how much you want to speed the video up or slow it down).
For more Windows Live Movie Maker tips, please go to how to edit videos in Windows Live Movie Maker .
By the way, Windows Live Movie Maker is really a good free video editing software. However, compared with other video editing software, it lacks some features. Have your thought about any video editing software better than Windows Live Movie Maker, which can slow down the motion effects and with powerful edting tools at the same time?
More Powerful Video Movie Making Can Slow Down Videos
For video movie making, you can use Wondershare Filmora to make a stunning movie from your home videos. All popular video formats are supported and lots of free video transition effects are provided for your to make your videos more smooth. With an intuitive interface, even beginners can make stunning movies with this video editor software.
Besides, you can directly upload your video to YouTube for sharing with family and friends. What’s the best? There are more special editing features like Scene Detection, Close-up, Jump Cut, Mosaic, Tilt Shift, Picture-in-Picture, Face off, Audio Separation, Playback Speed. Hurry to free download Wondershare Filmora to edit your stunning videos now!
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Slow motion effect is one of the most popular video effects. Fortunately, Windows Live Movie Maker provides this useful function for you to slow down your videos either for better presentation or better video effect. It is very easy to use Windows Live Movie Maker slow motion function. Just get Windows Live Movie Maker installed and follow the below guide to use slow motion effect in Windows Live Movie Maker.
How to slow down videos in Windows Live Movie Maker
Step 1. Add photos and videos to Windows Live Movie Maker
Click “Add videos and photos” to browse and select videos and photos from you computer to add. You can also drag and drop videos and photos to the storyboard.
Step 2. Slow down videos in Windows Live Movie Maker
To slow down videos, select the video clip and on the Edit tab under “Video Tools” choose a speed (depending on how much you want to speed the video up or slow it down).
For more Windows Live Movie Maker tips, please go to how to edit videos in Windows Live Movie Maker .
By the way, Windows Live Movie Maker is really a good free video editing software. However, compared with other video editing software, it lacks some features. Have your thought about any video editing software better than Windows Live Movie Maker, which can slow down the motion effects and with powerful edting tools at the same time?
More Powerful Video Movie Making Can Slow Down Videos
For video movie making, you can use Wondershare Filmora to make a stunning movie from your home videos. All popular video formats are supported and lots of free video transition effects are provided for your to make your videos more smooth. With an intuitive interface, even beginners can make stunning movies with this video editor software.
Besides, you can directly upload your video to YouTube for sharing with family and friends. What’s the best? There are more special editing features like Scene Detection, Close-up, Jump Cut, Mosaic, Tilt Shift, Picture-in-Picture, Face off, Audio Separation, Playback Speed. Hurry to free download Wondershare Filmora to edit your stunning videos now!
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Slow motion effect is one of the most popular video effects. Fortunately, Windows Live Movie Maker provides this useful function for you to slow down your videos either for better presentation or better video effect. It is very easy to use Windows Live Movie Maker slow motion function. Just get Windows Live Movie Maker installed and follow the below guide to use slow motion effect in Windows Live Movie Maker.
How to slow down videos in Windows Live Movie Maker
Step 1. Add photos and videos to Windows Live Movie Maker
Click “Add videos and photos” to browse and select videos and photos from you computer to add. You can also drag and drop videos and photos to the storyboard.
Step 2. Slow down videos in Windows Live Movie Maker
To slow down videos, select the video clip and on the Edit tab under “Video Tools” choose a speed (depending on how much you want to speed the video up or slow it down).
For more Windows Live Movie Maker tips, please go to how to edit videos in Windows Live Movie Maker .
By the way, Windows Live Movie Maker is really a good free video editing software. However, compared with other video editing software, it lacks some features. Have your thought about any video editing software better than Windows Live Movie Maker, which can slow down the motion effects and with powerful edting tools at the same time?
More Powerful Video Movie Making Can Slow Down Videos
For video movie making, you can use Wondershare Filmora to make a stunning movie from your home videos. All popular video formats are supported and lots of free video transition effects are provided for your to make your videos more smooth. With an intuitive interface, even beginners can make stunning movies with this video editor software.
Besides, you can directly upload your video to YouTube for sharing with family and friends. What’s the best? There are more special editing features like Scene Detection, Close-up, Jump Cut, Mosaic, Tilt Shift, Picture-in-Picture, Face off, Audio Separation, Playback Speed. Hurry to free download Wondershare Filmora to edit your stunning videos now!
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Slow motion effect is one of the most popular video effects. Fortunately, Windows Live Movie Maker provides this useful function for you to slow down your videos either for better presentation or better video effect. It is very easy to use Windows Live Movie Maker slow motion function. Just get Windows Live Movie Maker installed and follow the below guide to use slow motion effect in Windows Live Movie Maker.
How to slow down videos in Windows Live Movie Maker
Step 1. Add photos and videos to Windows Live Movie Maker
Click “Add videos and photos” to browse and select videos and photos from you computer to add. You can also drag and drop videos and photos to the storyboard.
Step 2. Slow down videos in Windows Live Movie Maker
To slow down videos, select the video clip and on the Edit tab under “Video Tools” choose a speed (depending on how much you want to speed the video up or slow it down).
For more Windows Live Movie Maker tips, please go to how to edit videos in Windows Live Movie Maker .
By the way, Windows Live Movie Maker is really a good free video editing software. However, compared with other video editing software, it lacks some features. Have your thought about any video editing software better than Windows Live Movie Maker, which can slow down the motion effects and with powerful edting tools at the same time?
More Powerful Video Movie Making Can Slow Down Videos
For video movie making, you can use Wondershare Filmora to make a stunning movie from your home videos. All popular video formats are supported and lots of free video transition effects are provided for your to make your videos more smooth. With an intuitive interface, even beginners can make stunning movies with this video editor software.
Besides, you can directly upload your video to YouTube for sharing with family and friends. What’s the best? There are more special editing features like Scene Detection, Close-up, Jump Cut, Mosaic, Tilt Shift, Picture-in-Picture, Face off, Audio Separation, Playback Speed. Hurry to free download Wondershare Filmora to edit your stunning videos now!
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Also read:
- New From Frustration to Flow Mastering FCPX Troubleshooting
- Updated On-the-Go Video Editing Top Apps for iPhone and Android Users
- Updated 2024 Approved IMovie on Windows? Try These 10+ Alternatives Instead
- 2024 Approved S Top-Rated Free Video Editors for 32-Bit Windows Users
- Updated 2024 Approved Windows Movie Maker on Mac Discover the Best Equivalent Software
- New 2024 Approved Unlock Efficiency The Most Useful Adobe Premiere Shortcuts Revealed
- Updated Windows 10S Best Zero-Cost Video Trimming Solutions
- Updated In 2024, Final Cut Pro on a Budget Get 90 Days of Free Access Now
- New 2024 Approved How to Create Cinematic Look Video with Final Cut Pro X
- New 2024 Approved Quick and Easy Online Tone Generation Top 5
- Avidemux Audio Fix Expert Solutions for Common Issues for 2024
- New Create Stunning Videos From Images with These 10 Online Converters
- New Here Are the Apps that We Recommended to Blur a Face or Any Part of an Image Just Moments After Youve Recorded a Video or Taken a Photo for 2024
- Join WMV Videos for Free Top 5 Tools
- 2024 Approved Online Video Reverse Software Top Picks
- Updated 2024 Approved Loop Your Videos with Ease Best Free Software for PC and Mac
- Updated 2024 Approved Calculate Aspect Ratios with Ease Top 5 Online Tools
- Updated Editing on the Go Top 8 Lightweight Video Software for Portability for 2024
- New 2024 Approved Get Rid of TikTok Watermarks Top-Rated Online Removers
- 2024 Approved Capture Perfection Top-Rated Webcam Recording Software for Windows 10
- 2024 Approved From Audio to Visual Key Considerations for MP3 to MP4 Conversion
- Updated 2024 Approved Unleash the Archive Best Public Domain Video Download Sites
- In 2024, Low-Cost Video Editing Options That Deliver
- New In 2024, GoPro Quik Review Is It the Best Video Editor for Your Needs?
- Updated In 2024, S Hottest Adobe Premiere Title Templates 20 Free Downloads
- New Revolutionize Your Videos Best Software for Enhancing Resolution
- The Art of Slow Motion How to Make Jaw-Dropping Videos on Kapwing for 2024
- Updated In 2024, Video Dimensions for Instagram How to Choose the Right Aspect Ratio
- 2024 Approved Meme Magic 10 Best Apps to Create Hilarious Content
- New The Ultimate Guide to WhatsApp Status Maker Apps for 2024
- New In This Article, I Want to Show You How to Apply an Effect to a Clip, Modify that Effect, Temporarily Turn that Effect on or Off, or Delete It Entirely for 2024
- New Debunking Myths 5 Little-Known Truths About the 16X9 Ratio Calculator
- New In 2024, Transform Your GoPro Footage Quick and Easy Video Editing on MacBook
- Updated 2024 Approved The Ultimate Guide to Free 4K Video Editing
- iPogo will be the new iSpoofer On Oppo A78? | Dr.fone
- In 2024, Getting the Pokemon Go GPS Signal Not Found 11 Error in Vivo S17t | Dr.fone
- In 2024, Top 7 Skype Hacker to Hack Any Skype Account On your Realme Narzo N53 | Dr.fone
- In 2024, Compress Videos on the Go Best Free iPhone and iPad Apps
- How To Stream Anything From Oppo K11x to Apple TV | Dr.fone
- How to Successfully Bypass iCloud Activation Lock on Apple iPhone SE (2022)
- In 2024, Forgotten The Voicemail Password Of Samsung Galaxy A05s? Try These Fixes
- 2024 Approved Top List Best VHS Sound Effect That You Can Use in Video Making
- In 2024, Best Anti Tracker Software For Sony Xperia 10 V | Dr.fone
- 7 Fixes for Unfortunately, Phone Has Stopped on Itel S23+ | Dr.fone
- 9 Solutions to Fix Process System Isnt Responding Error on Samsung Galaxy F15 5G | Dr.fone
- new 2024 Approved How to Translate Audio/Video Content from Spanish to English and vice versa?
- In 2024, Top 7 iCloud Activation Bypass Tools For your Apple iPhone 8
- New 10 Android Video Editors Similar to iMovie for 2024
- How to fix Pivot Table Field Name is not Valid error in Excel 2003? | Stellar
- How to Fix corrupt video files of Oppo A79 5G using Video Repair Utility on Mac?
- Title: 2024 Approved M4R Converter, M4a to M4r, Convert M4a to M4r, Mp3 M4r, Aac to M4r, Wav to M4r, M4r Converter Online, Change M4a to M4r
- Author: Amelia
- Created at : 2024-06-08 18:31:26
- Updated at : 2024-06-09 18:31:26
- Link: https://ai-driven-video-production.techidaily.com/2024-approved-m4r-converter-m4a-to-m4r-convert-m4a-to-m4r-mp3-m4r-aac-to-m4r-wav-to-m4r-m4r-converter-online-change-m4a-to-m4r/
- License: This work is licensed under CC BY-NC-SA 4.0.