FCPX Title Design: Tips and Tricks for Stunning Visuals

How to Add Titles in Final Cut Pro X

Benjamin Arango

Mar 27, 2024• Proven solutions

We add text titles to our projects to tell the audience something they can’t figure out on their own, such as the title of our program, the name of the person speaking, or technical details about a subject.

---

This is a basic tutorial about Apple Final Cut Pro X, professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

Final Cut Pro X has almost 200 different text effects that we can add, but the process of adding titles is essentially the same. Adding titles is what this article is about.

DEFINITIONS

Just to keep us all on the same page, here are my definitions of key terms related to text:

• Text or titles. Words placed on the screen. I use these terms interchangeably.
• Superimpose. Text displayed on the the screen with other video below it. These are also called “supers” or “keys.”
• Full-screen. Text which occupies the entire screen.
• Lower-third. Text which fits below a person talking; in the “lower-third” of the screen.
• Info-graphics. Full-screen text which is superimposed on a graphic, generally used to convey technical information. Typical uses are sports statistics or other information which is easier to convey using text than having someone read the words.

JUST THE BASICS

I’d like to introduce “Yertle,” he’s a sea turtle and the star of this article. (Footage courtesy of Jim Walker and Lobsters Gone Wild Productions.)

At its simplest, we use titles to display his (its?) name.

In the Timeline, put the playhead where you want a title to appear and type Shift+Control+T. This inserts the default lower-third title at the position of the playhead. The title, like almost all titles, has a default duration of 10:00 seconds.

Look at the Browser and see the results of your work. A lower-third title is superimposed over the video in the lower left corner. (I’ll talk about formatting the text in a few paragraphs.)

NOTE: The big limitation of this lower-third title is that it can only be positioned in the left corner. Moving it to the center or right corner requires manual adjustment.

You position or trim a title the same as any video clip: drag the clip to a different location, or drag an edge to change its duration.

Select that title and delete it by pressing the Delete key.

This time, type Control+T and the default full-screen title appears in the center of the screen. Again, this has a default duration of 10 seconds.

If you look right in the center of the screen, you’ll see the word “Title.” Yes, its darn near invisible. And, yes, it looks, um, ugly. However, we have a TON of formatting control to make this look however we want.

Select and delete that full-screen title.

There’s one more way to apply a title: dragging from the Titles Browser.

Click the Title icon in the Toolbar. This displays the contents of the Title Browser. The column on the left displays title categories, the icons on the right indicate individual titles, the search box at the bottom allows you to search for specific titles by name, while the number in the lower right indicates the number of titles currently displayed. (Your number may not match mine because I’ve added a few custom titles to my system.)

Let’s add a totally ridiculous title to our turtle - drag Clouds from the Title Browser and place it above the clip at the point where you want a title to appear.

NOTE: I’m using a marker in the Timeline to help me find the same place in a clip so my screen shots are consistent. Markers are not needed in any way for titles.

Um, yeah. So, some titles look more professional than others… You can delete this title now.

So, we:

• Add titles using keyboard shortcuts
• Drag titles from the Title Browser
• Change position by dragging the title
• Change duration by dragging the edge of the clip
• Delete a title by selecting it and pressing the Delete key

CHANGING TEXT

Add a new full-screen title (type Control+T) to the Timeline. To change the text in a title, double-click it in the Viewer. Here, I’ve changed my title to “An Undersea Adventure.”

NOTE: We can also change the text using the Inspector. I’ll show you how in a few paragraphs. Pick whichever method is easiest for you.

All text, in any title, can be changed by double-clicking it in the Viewer to select it, then typing the new text you want to use.

FORMATTING TEXT

You can format any text that you can select. This means that you can format entire phrases, words, or individual letters differently. For this article, I will format everything the same, because once you know how this works, you can experiment on your own.

Here, I selected my entire title and opened the Inspector (shortcut Cmd+4). Click the Text tab at the top. This section of the Inspector allows you to format the text.

NOTE: The text box near the top of the panel is the second place you can select text for formatting.

If you want a fast way to format text, click the word “Normal” at the top. This displays a menu filled with different text formats. Some of these formats look pretty dreadful; the rest look worse.

NOTE: You can create your own text styles. Refer to the Help for information on how.

The Basic section of the Inspector allows you to change fonts, size, alignment… all the standard font settings we see in other programs. Here, I’ve changed the font to Hobo Std, at 167 points.

While many of these settings you already know there are a few you may not:

• Line spacing. Adjusts the vertical distance between lines within the same paragraph.
• Tracking. Adjusts the horizontal spacing between letters.
• Baseline. Adjusts the vertical spacing of text compared to the horizontal line running thru the center of the white circle in the Viewer.

The Face section allows us to change font color, opacity and blue. Outline and Glow allows us to add, not surprisingly, outlines and glows. You can adjust these as you see fit - I tend not to add outlines or glows.

However, I STRONGLY recommend adding drop shadows to all text that you want viewers to read. Video, even HD video, is low resolution compared to print. Drop shadows make your text much easier to read. These are the settings I recommend for drop shadows.

After making a few changes in the Inspector, here’s the final result. Very cool - and very different from where we started!

ACTION SAFE/TITLE SAFE ZONES

Since television was first invented, we needed to compensate for the differences in TV sets by designing graphics to stay within Action Safe and Title Safe boundaries.

While much of today’s video is designed for the web, your titles will look the best if you follow the same guidelines.

Titles015

Go to the Switch in the Viewer and select “Show Action Safe/Title Safe Zones.”

This displays two pale rectangles in the frame. The outer rectangle is called “Action Safe,” the inner one is called “Title Safe.” Action Safe is 5% in from all edges; Title Safe is 10% in from all edges.

When designing text and graphics for the web, keep all essential elements inside the outer rectangle. When designing graphics and text for broadcast or cable, keep all essential elements inside the inner rectangle.

Here, for example, notice that my title is fully contained within Action Safe.

SUMMARY

Titles give our programs character and personality, plus they explain what’s going on to the audience. Final Cut Pro X provides a wealth of formatting options to make our text look great.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

We add text titles to our projects to tell the audience something they can’t figure out on their own, such as the title of our program, the name of the person speaking, or technical details about a subject.

---

This is a basic tutorial about Apple Final Cut Pro X, professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

Final Cut Pro X has almost 200 different text effects that we can add, but the process of adding titles is essentially the same. Adding titles is what this article is about.

DEFINITIONS

Just to keep us all on the same page, here are my definitions of key terms related to text:

• Text or titles. Words placed on the screen. I use these terms interchangeably.
• Superimpose. Text displayed on the the screen with other video below it. These are also called “supers” or “keys.”
• Full-screen. Text which occupies the entire screen.
• Lower-third. Text which fits below a person talking; in the “lower-third” of the screen.
• Info-graphics. Full-screen text which is superimposed on a graphic, generally used to convey technical information. Typical uses are sports statistics or other information which is easier to convey using text than having someone read the words.

JUST THE BASICS

I’d like to introduce “Yertle,” he’s a sea turtle and the star of this article. (Footage courtesy of Jim Walker and Lobsters Gone Wild Productions.)

At its simplest, we use titles to display his (its?) name.

In the Timeline, put the playhead where you want a title to appear and type Shift+Control+T. This inserts the default lower-third title at the position of the playhead. The title, like almost all titles, has a default duration of 10:00 seconds.

Look at the Browser and see the results of your work. A lower-third title is superimposed over the video in the lower left corner. (I’ll talk about formatting the text in a few paragraphs.)

NOTE: The big limitation of this lower-third title is that it can only be positioned in the left corner. Moving it to the center or right corner requires manual adjustment.

You position or trim a title the same as any video clip: drag the clip to a different location, or drag an edge to change its duration.

Select that title and delete it by pressing the Delete key.

This time, type Control+T and the default full-screen title appears in the center of the screen. Again, this has a default duration of 10 seconds.

If you look right in the center of the screen, you’ll see the word “Title.” Yes, its darn near invisible. And, yes, it looks, um, ugly. However, we have a TON of formatting control to make this look however we want.

Select and delete that full-screen title.

There’s one more way to apply a title: dragging from the Titles Browser.

Click the Title icon in the Toolbar. This displays the contents of the Title Browser. The column on the left displays title categories, the icons on the right indicate individual titles, the search box at the bottom allows you to search for specific titles by name, while the number in the lower right indicates the number of titles currently displayed. (Your number may not match mine because I’ve added a few custom titles to my system.)

Let’s add a totally ridiculous title to our turtle - drag Clouds from the Title Browser and place it above the clip at the point where you want a title to appear.

NOTE: I’m using a marker in the Timeline to help me find the same place in a clip so my screen shots are consistent. Markers are not needed in any way for titles.

Um, yeah. So, some titles look more professional than others… You can delete this title now.

So, we:

• Add titles using keyboard shortcuts
• Drag titles from the Title Browser
• Change position by dragging the title
• Change duration by dragging the edge of the clip
• Delete a title by selecting it and pressing the Delete key

CHANGING TEXT

Add a new full-screen title (type Control+T) to the Timeline. To change the text in a title, double-click it in the Viewer. Here, I’ve changed my title to “An Undersea Adventure.”

NOTE: We can also change the text using the Inspector. I’ll show you how in a few paragraphs. Pick whichever method is easiest for you.

All text, in any title, can be changed by double-clicking it in the Viewer to select it, then typing the new text you want to use.

FORMATTING TEXT

You can format any text that you can select. This means that you can format entire phrases, words, or individual letters differently. For this article, I will format everything the same, because once you know how this works, you can experiment on your own.

Here, I selected my entire title and opened the Inspector (shortcut Cmd+4). Click the Text tab at the top. This section of the Inspector allows you to format the text.

NOTE: The text box near the top of the panel is the second place you can select text for formatting.

If you want a fast way to format text, click the word “Normal” at the top. This displays a menu filled with different text formats. Some of these formats look pretty dreadful; the rest look worse.

NOTE: You can create your own text styles. Refer to the Help for information on how.

The Basic section of the Inspector allows you to change fonts, size, alignment… all the standard font settings we see in other programs. Here, I’ve changed the font to Hobo Std, at 167 points.

While many of these settings you already know there are a few you may not:

• Line spacing. Adjusts the vertical distance between lines within the same paragraph.
• Tracking. Adjusts the horizontal spacing between letters.
• Baseline. Adjusts the vertical spacing of text compared to the horizontal line running thru the center of the white circle in the Viewer.

The Face section allows us to change font color, opacity and blue. Outline and Glow allows us to add, not surprisingly, outlines and glows. You can adjust these as you see fit - I tend not to add outlines or glows.

However, I STRONGLY recommend adding drop shadows to all text that you want viewers to read. Video, even HD video, is low resolution compared to print. Drop shadows make your text much easier to read. These are the settings I recommend for drop shadows.

After making a few changes in the Inspector, here’s the final result. Very cool - and very different from where we started!

ACTION SAFE/TITLE SAFE ZONES

Since television was first invented, we needed to compensate for the differences in TV sets by designing graphics to stay within Action Safe and Title Safe boundaries.

While much of today’s video is designed for the web, your titles will look the best if you follow the same guidelines.

Titles015

Go to the Switch in the Viewer and select “Show Action Safe/Title Safe Zones.”

This displays two pale rectangles in the frame. The outer rectangle is called “Action Safe,” the inner one is called “Title Safe.” Action Safe is 5% in from all edges; Title Safe is 10% in from all edges.

When designing text and graphics for the web, keep all essential elements inside the outer rectangle. When designing graphics and text for broadcast or cable, keep all essential elements inside the inner rectangle.

Here, for example, notice that my title is fully contained within Action Safe.

SUMMARY

Titles give our programs character and personality, plus they explain what’s going on to the audience. Final Cut Pro X provides a wealth of formatting options to make our text look great.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

We add text titles to our projects to tell the audience something they can’t figure out on their own, such as the title of our program, the name of the person speaking, or technical details about a subject.

---

This is a basic tutorial about Apple Final Cut Pro X, professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

Final Cut Pro X has almost 200 different text effects that we can add, but the process of adding titles is essentially the same. Adding titles is what this article is about.

DEFINITIONS

Just to keep us all on the same page, here are my definitions of key terms related to text:

• Text or titles. Words placed on the screen. I use these terms interchangeably.
• Superimpose. Text displayed on the the screen with other video below it. These are also called “supers” or “keys.”
• Full-screen. Text which occupies the entire screen.
• Lower-third. Text which fits below a person talking; in the “lower-third” of the screen.
• Info-graphics. Full-screen text which is superimposed on a graphic, generally used to convey technical information. Typical uses are sports statistics or other information which is easier to convey using text than having someone read the words.

JUST THE BASICS

I’d like to introduce “Yertle,” he’s a sea turtle and the star of this article. (Footage courtesy of Jim Walker and Lobsters Gone Wild Productions.)

At its simplest, we use titles to display his (its?) name.

In the Timeline, put the playhead where you want a title to appear and type Shift+Control+T. This inserts the default lower-third title at the position of the playhead. The title, like almost all titles, has a default duration of 10:00 seconds.

Look at the Browser and see the results of your work. A lower-third title is superimposed over the video in the lower left corner. (I’ll talk about formatting the text in a few paragraphs.)

NOTE: The big limitation of this lower-third title is that it can only be positioned in the left corner. Moving it to the center or right corner requires manual adjustment.

You position or trim a title the same as any video clip: drag the clip to a different location, or drag an edge to change its duration.

Select that title and delete it by pressing the Delete key.

This time, type Control+T and the default full-screen title appears in the center of the screen. Again, this has a default duration of 10 seconds.

If you look right in the center of the screen, you’ll see the word “Title.” Yes, its darn near invisible. And, yes, it looks, um, ugly. However, we have a TON of formatting control to make this look however we want.

Select and delete that full-screen title.

There’s one more way to apply a title: dragging from the Titles Browser.

Click the Title icon in the Toolbar. This displays the contents of the Title Browser. The column on the left displays title categories, the icons on the right indicate individual titles, the search box at the bottom allows you to search for specific titles by name, while the number in the lower right indicates the number of titles currently displayed. (Your number may not match mine because I’ve added a few custom titles to my system.)

Let’s add a totally ridiculous title to our turtle - drag Clouds from the Title Browser and place it above the clip at the point where you want a title to appear.

NOTE: I’m using a marker in the Timeline to help me find the same place in a clip so my screen shots are consistent. Markers are not needed in any way for titles.

Um, yeah. So, some titles look more professional than others… You can delete this title now.

So, we:

• Add titles using keyboard shortcuts
• Drag titles from the Title Browser
• Change position by dragging the title
• Change duration by dragging the edge of the clip
• Delete a title by selecting it and pressing the Delete key

CHANGING TEXT

Add a new full-screen title (type Control+T) to the Timeline. To change the text in a title, double-click it in the Viewer. Here, I’ve changed my title to “An Undersea Adventure.”

NOTE: We can also change the text using the Inspector. I’ll show you how in a few paragraphs. Pick whichever method is easiest for you.

All text, in any title, can be changed by double-clicking it in the Viewer to select it, then typing the new text you want to use.

FORMATTING TEXT

You can format any text that you can select. This means that you can format entire phrases, words, or individual letters differently. For this article, I will format everything the same, because once you know how this works, you can experiment on your own.

Here, I selected my entire title and opened the Inspector (shortcut Cmd+4). Click the Text tab at the top. This section of the Inspector allows you to format the text.

NOTE: The text box near the top of the panel is the second place you can select text for formatting.

If you want a fast way to format text, click the word “Normal” at the top. This displays a menu filled with different text formats. Some of these formats look pretty dreadful; the rest look worse.

NOTE: You can create your own text styles. Refer to the Help for information on how.

The Basic section of the Inspector allows you to change fonts, size, alignment… all the standard font settings we see in other programs. Here, I’ve changed the font to Hobo Std, at 167 points.

While many of these settings you already know there are a few you may not:

• Line spacing. Adjusts the vertical distance between lines within the same paragraph.
• Tracking. Adjusts the horizontal spacing between letters.
• Baseline. Adjusts the vertical spacing of text compared to the horizontal line running thru the center of the white circle in the Viewer.

The Face section allows us to change font color, opacity and blue. Outline and Glow allows us to add, not surprisingly, outlines and glows. You can adjust these as you see fit - I tend not to add outlines or glows.

However, I STRONGLY recommend adding drop shadows to all text that you want viewers to read. Video, even HD video, is low resolution compared to print. Drop shadows make your text much easier to read. These are the settings I recommend for drop shadows.

After making a few changes in the Inspector, here’s the final result. Very cool - and very different from where we started!

ACTION SAFE/TITLE SAFE ZONES

Since television was first invented, we needed to compensate for the differences in TV sets by designing graphics to stay within Action Safe and Title Safe boundaries.

While much of today’s video is designed for the web, your titles will look the best if you follow the same guidelines.

Titles015

Go to the Switch in the Viewer and select “Show Action Safe/Title Safe Zones.”

This displays two pale rectangles in the frame. The outer rectangle is called “Action Safe,” the inner one is called “Title Safe.” Action Safe is 5% in from all edges; Title Safe is 10% in from all edges.

When designing text and graphics for the web, keep all essential elements inside the outer rectangle. When designing graphics and text for broadcast or cable, keep all essential elements inside the inner rectangle.

Here, for example, notice that my title is fully contained within Action Safe.

SUMMARY

Titles give our programs character and personality, plus they explain what’s going on to the audience. Final Cut Pro X provides a wealth of formatting options to make our text look great.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

We add text titles to our projects to tell the audience something they can’t figure out on their own, such as the title of our program, the name of the person speaking, or technical details about a subject.

---

This is a basic tutorial about Apple Final Cut Pro X, professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

Final Cut Pro X has almost 200 different text effects that we can add, but the process of adding titles is essentially the same. Adding titles is what this article is about.

DEFINITIONS

Just to keep us all on the same page, here are my definitions of key terms related to text:

• Text or titles. Words placed on the screen. I use these terms interchangeably.
• Superimpose. Text displayed on the the screen with other video below it. These are also called “supers” or “keys.”
• Full-screen. Text which occupies the entire screen.
• Lower-third. Text which fits below a person talking; in the “lower-third” of the screen.
• Info-graphics. Full-screen text which is superimposed on a graphic, generally used to convey technical information. Typical uses are sports statistics or other information which is easier to convey using text than having someone read the words.

JUST THE BASICS

I’d like to introduce “Yertle,” he’s a sea turtle and the star of this article. (Footage courtesy of Jim Walker and Lobsters Gone Wild Productions.)

At its simplest, we use titles to display his (its?) name.

In the Timeline, put the playhead where you want a title to appear and type Shift+Control+T. This inserts the default lower-third title at the position of the playhead. The title, like almost all titles, has a default duration of 10:00 seconds.

Look at the Browser and see the results of your work. A lower-third title is superimposed over the video in the lower left corner. (I’ll talk about formatting the text in a few paragraphs.)

NOTE: The big limitation of this lower-third title is that it can only be positioned in the left corner. Moving it to the center or right corner requires manual adjustment.

You position or trim a title the same as any video clip: drag the clip to a different location, or drag an edge to change its duration.

Select that title and delete it by pressing the Delete key.

This time, type Control+T and the default full-screen title appears in the center of the screen. Again, this has a default duration of 10 seconds.

If you look right in the center of the screen, you’ll see the word “Title.” Yes, its darn near invisible. And, yes, it looks, um, ugly. However, we have a TON of formatting control to make this look however we want.

Select and delete that full-screen title.

There’s one more way to apply a title: dragging from the Titles Browser.

Click the Title icon in the Toolbar. This displays the contents of the Title Browser. The column on the left displays title categories, the icons on the right indicate individual titles, the search box at the bottom allows you to search for specific titles by name, while the number in the lower right indicates the number of titles currently displayed. (Your number may not match mine because I’ve added a few custom titles to my system.)

Let’s add a totally ridiculous title to our turtle - drag Clouds from the Title Browser and place it above the clip at the point where you want a title to appear.

NOTE: I’m using a marker in the Timeline to help me find the same place in a clip so my screen shots are consistent. Markers are not needed in any way for titles.

Um, yeah. So, some titles look more professional than others… You can delete this title now.

So, we:

• Add titles using keyboard shortcuts
• Drag titles from the Title Browser
• Change position by dragging the title
• Change duration by dragging the edge of the clip
• Delete a title by selecting it and pressing the Delete key

CHANGING TEXT

Add a new full-screen title (type Control+T) to the Timeline. To change the text in a title, double-click it in the Viewer. Here, I’ve changed my title to “An Undersea Adventure.”

NOTE: We can also change the text using the Inspector. I’ll show you how in a few paragraphs. Pick whichever method is easiest for you.

All text, in any title, can be changed by double-clicking it in the Viewer to select it, then typing the new text you want to use.

FORMATTING TEXT

You can format any text that you can select. This means that you can format entire phrases, words, or individual letters differently. For this article, I will format everything the same, because once you know how this works, you can experiment on your own.

Here, I selected my entire title and opened the Inspector (shortcut Cmd+4). Click the Text tab at the top. This section of the Inspector allows you to format the text.

NOTE: The text box near the top of the panel is the second place you can select text for formatting.

If you want a fast way to format text, click the word “Normal” at the top. This displays a menu filled with different text formats. Some of these formats look pretty dreadful; the rest look worse.

NOTE: You can create your own text styles. Refer to the Help for information on how.

The Basic section of the Inspector allows you to change fonts, size, alignment… all the standard font settings we see in other programs. Here, I’ve changed the font to Hobo Std, at 167 points.

While many of these settings you already know there are a few you may not:

• Line spacing. Adjusts the vertical distance between lines within the same paragraph.
• Tracking. Adjusts the horizontal spacing between letters.
• Baseline. Adjusts the vertical spacing of text compared to the horizontal line running thru the center of the white circle in the Viewer.

The Face section allows us to change font color, opacity and blue. Outline and Glow allows us to add, not surprisingly, outlines and glows. You can adjust these as you see fit - I tend not to add outlines or glows.

However, I STRONGLY recommend adding drop shadows to all text that you want viewers to read. Video, even HD video, is low resolution compared to print. Drop shadows make your text much easier to read. These are the settings I recommend for drop shadows.

After making a few changes in the Inspector, here’s the final result. Very cool - and very different from where we started!

ACTION SAFE/TITLE SAFE ZONES

Since television was first invented, we needed to compensate for the differences in TV sets by designing graphics to stay within Action Safe and Title Safe boundaries.

While much of today’s video is designed for the web, your titles will look the best if you follow the same guidelines.

Titles015

Go to the Switch in the Viewer and select “Show Action Safe/Title Safe Zones.”

This displays two pale rectangles in the frame. The outer rectangle is called “Action Safe,” the inner one is called “Title Safe.” Action Safe is 5% in from all edges; Title Safe is 10% in from all edges.

When designing text and graphics for the web, keep all essential elements inside the outer rectangle. When designing graphics and text for broadcast or cable, keep all essential elements inside the inner rectangle.

Here, for example, notice that my title is fully contained within Action Safe.

SUMMARY

Titles give our programs character and personality, plus they explain what’s going on to the audience. Final Cut Pro X provides a wealth of formatting options to make our text look great.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Unlock FCP’s Full Potential: Top 5 Editing Secrets Revealed

Top 5 Final Cut Pro Editing Tips You Should Know

Benjamin Arango

Mar 27, 2024• Proven solutions

Most of the professionals throughout the world recommend Final Cut Pro as the best video editing software tool due to its incredible features. Final Cut Pro or simply called FCP is a wonderful video editing application that is available for Mac users; before Apple it was originally developed by Macromedia Inc. Some major modification capabilities of this software tool include its ability to handle about 99 audio tracks at a time, 3-way color correction feature, cutout tools, audio filters , ripple editing functions and many more.

You may also like: How to add effects in Final Cut Pro >>

Top 5 Final Cut Pro editing tips

The major criteria that differentiate simple editing tools and Final Cut Pro is the speed as in FCP users are able to stream knowledge into tricks within a few minutes. Things that make FCP one of the best tools for video editing needs are discussed as below:

1.Favourites and Keyword first

With FCP, it is possible to add keywords to your videos in much easier manner. Users simply need to press Command K for bringing up required keywords on timeline. The predefined keywords of your media file are also organized with control shortcuts. You can go to favourites option from drop down menu directly and the clips can be shorted as well as organized with easy-to-use collections on the left side.

2.Custom Keyboard shortcuts for hidden features

Keyboard shortcuts can provide faster support to some common actions and this feature is well equipped in FCP. For example, it is possible to use H and G as shortcut commands to initiate the action of Trim End and Trim Start. You will be glad to know that FCP allows customization for shortcuts that means you can add something more than the default keys as per need. Simple go to Final Cut Pro and then visit Commands; here you need to click on Customize and soon you will be able to assign different keys for required tasks.

3.Live Trimming

When we start editing any media clip then one of our major needs is to make that clip shorter but not all available software tools assists in easy trimming. Users of FCP are blessed in this context as they can trim videos on real time basis by using Trim Start, Trim End and Trim Playhead facility.

4.Adjustment Layers

It is possible to create your own motion effects with the help of FCP and they can be also taken from online sources. But the special feature is the adjustment layer that helps to maintain shooting space of camera and apply automatic correction filters on footage so that every clip can be corrected individually with perfect colour blending.

5.Export Faster

Although this software tool is downplayed with the help of unique language but the encoding capabilities of FCP are observed to be very high. It offers rich quality as compared to all other competitive tool and when person is using it on any modern Mac systems then it becomes much faster.

You may also like:

• Top 40 Keyboard Shortcuts for FCP >>
• Troubleshooting Tips for FCP >>

Best Alternative to Final Cut Pro

If you are searching for an alternative to the Final Cut Pro video editing tool then Wondershare Filmora for Mac can be the best choice for you. It comes with a fully stacked type feature set and serves with potential functionality so that professionals can manage all their media editing needs with ease. Wondershare Filmora possesses a drag and drop type interface so that users can create stories in a very artistic manner without sending more time of tool search.

Some of the key features of Wondershare Filmora Includes:

• Titles and Text - Wondershare Filmora extends its support towards animated text.
• Music Library – It is possible to edit or customize music tracks as per need.
• Filters and Overlays – In order to provide professional touch to all edited media files, Wondershare Filmora platform is loaded with advanced overlays and filters.
• Elements – Supports classic graphic needs and various visual effects.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Most of the professionals throughout the world recommend Final Cut Pro as the best video editing software tool due to its incredible features. Final Cut Pro or simply called FCP is a wonderful video editing application that is available for Mac users; before Apple it was originally developed by Macromedia Inc. Some major modification capabilities of this software tool include its ability to handle about 99 audio tracks at a time, 3-way color correction feature, cutout tools, audio filters , ripple editing functions and many more.

You may also like: How to add effects in Final Cut Pro >>

Top 5 Final Cut Pro editing tips

The major criteria that differentiate simple editing tools and Final Cut Pro is the speed as in FCP users are able to stream knowledge into tricks within a few minutes. Things that make FCP one of the best tools for video editing needs are discussed as below:

1.Favourites and Keyword first

With FCP, it is possible to add keywords to your videos in much easier manner. Users simply need to press Command K for bringing up required keywords on timeline. The predefined keywords of your media file are also organized with control shortcuts. You can go to favourites option from drop down menu directly and the clips can be shorted as well as organized with easy-to-use collections on the left side.

2.Custom Keyboard shortcuts for hidden features

Keyboard shortcuts can provide faster support to some common actions and this feature is well equipped in FCP. For example, it is possible to use H and G as shortcut commands to initiate the action of Trim End and Trim Start. You will be glad to know that FCP allows customization for shortcuts that means you can add something more than the default keys as per need. Simple go to Final Cut Pro and then visit Commands; here you need to click on Customize and soon you will be able to assign different keys for required tasks.

3.Live Trimming

When we start editing any media clip then one of our major needs is to make that clip shorter but not all available software tools assists in easy trimming. Users of FCP are blessed in this context as they can trim videos on real time basis by using Trim Start, Trim End and Trim Playhead facility.

4.Adjustment Layers

It is possible to create your own motion effects with the help of FCP and they can be also taken from online sources. But the special feature is the adjustment layer that helps to maintain shooting space of camera and apply automatic correction filters on footage so that every clip can be corrected individually with perfect colour blending.

5.Export Faster

Although this software tool is downplayed with the help of unique language but the encoding capabilities of FCP are observed to be very high. It offers rich quality as compared to all other competitive tool and when person is using it on any modern Mac systems then it becomes much faster.

You may also like:

• Top 40 Keyboard Shortcuts for FCP >>
• Troubleshooting Tips for FCP >>

Best Alternative to Final Cut Pro

If you are searching for an alternative to the Final Cut Pro video editing tool then Wondershare Filmora for Mac can be the best choice for you. It comes with a fully stacked type feature set and serves with potential functionality so that professionals can manage all their media editing needs with ease. Wondershare Filmora possesses a drag and drop type interface so that users can create stories in a very artistic manner without sending more time of tool search.

Some of the key features of Wondershare Filmora Includes:

• Titles and Text - Wondershare Filmora extends its support towards animated text.
• Music Library – It is possible to edit or customize music tracks as per need.
• Filters and Overlays – In order to provide professional touch to all edited media files, Wondershare Filmora platform is loaded with advanced overlays and filters.
• Elements – Supports classic graphic needs and various visual effects.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Most of the professionals throughout the world recommend Final Cut Pro as the best video editing software tool due to its incredible features. Final Cut Pro or simply called FCP is a wonderful video editing application that is available for Mac users; before Apple it was originally developed by Macromedia Inc. Some major modification capabilities of this software tool include its ability to handle about 99 audio tracks at a time, 3-way color correction feature, cutout tools, audio filters , ripple editing functions and many more.

You may also like: How to add effects in Final Cut Pro >>

Top 5 Final Cut Pro editing tips

The major criteria that differentiate simple editing tools and Final Cut Pro is the speed as in FCP users are able to stream knowledge into tricks within a few minutes. Things that make FCP one of the best tools for video editing needs are discussed as below:

1.Favourites and Keyword first

With FCP, it is possible to add keywords to your videos in much easier manner. Users simply need to press Command K for bringing up required keywords on timeline. The predefined keywords of your media file are also organized with control shortcuts. You can go to favourites option from drop down menu directly and the clips can be shorted as well as organized with easy-to-use collections on the left side.

2.Custom Keyboard shortcuts for hidden features

Keyboard shortcuts can provide faster support to some common actions and this feature is well equipped in FCP. For example, it is possible to use H and G as shortcut commands to initiate the action of Trim End and Trim Start. You will be glad to know that FCP allows customization for shortcuts that means you can add something more than the default keys as per need. Simple go to Final Cut Pro and then visit Commands; here you need to click on Customize and soon you will be able to assign different keys for required tasks.

3.Live Trimming

When we start editing any media clip then one of our major needs is to make that clip shorter but not all available software tools assists in easy trimming. Users of FCP are blessed in this context as they can trim videos on real time basis by using Trim Start, Trim End and Trim Playhead facility.

4.Adjustment Layers

It is possible to create your own motion effects with the help of FCP and they can be also taken from online sources. But the special feature is the adjustment layer that helps to maintain shooting space of camera and apply automatic correction filters on footage so that every clip can be corrected individually with perfect colour blending.

5.Export Faster

Although this software tool is downplayed with the help of unique language but the encoding capabilities of FCP are observed to be very high. It offers rich quality as compared to all other competitive tool and when person is using it on any modern Mac systems then it becomes much faster.

You may also like:

• Top 40 Keyboard Shortcuts for FCP >>
• Troubleshooting Tips for FCP >>

Best Alternative to Final Cut Pro

If you are searching for an alternative to the Final Cut Pro video editing tool then Wondershare Filmora for Mac can be the best choice for you. It comes with a fully stacked type feature set and serves with potential functionality so that professionals can manage all their media editing needs with ease. Wondershare Filmora possesses a drag and drop type interface so that users can create stories in a very artistic manner without sending more time of tool search.

Some of the key features of Wondershare Filmora Includes:

• Titles and Text - Wondershare Filmora extends its support towards animated text.
• Music Library – It is possible to edit or customize music tracks as per need.
• Filters and Overlays – In order to provide professional touch to all edited media files, Wondershare Filmora platform is loaded with advanced overlays and filters.
• Elements – Supports classic graphic needs and various visual effects.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Most of the professionals throughout the world recommend Final Cut Pro as the best video editing software tool due to its incredible features. Final Cut Pro or simply called FCP is a wonderful video editing application that is available for Mac users; before Apple it was originally developed by Macromedia Inc. Some major modification capabilities of this software tool include its ability to handle about 99 audio tracks at a time, 3-way color correction feature, cutout tools, audio filters , ripple editing functions and many more.

You may also like: How to add effects in Final Cut Pro >>

Top 5 Final Cut Pro editing tips

The major criteria that differentiate simple editing tools and Final Cut Pro is the speed as in FCP users are able to stream knowledge into tricks within a few minutes. Things that make FCP one of the best tools for video editing needs are discussed as below:

1.Favourites and Keyword first

With FCP, it is possible to add keywords to your videos in much easier manner. Users simply need to press Command K for bringing up required keywords on timeline. The predefined keywords of your media file are also organized with control shortcuts. You can go to favourites option from drop down menu directly and the clips can be shorted as well as organized with easy-to-use collections on the left side.

2.Custom Keyboard shortcuts for hidden features

Keyboard shortcuts can provide faster support to some common actions and this feature is well equipped in FCP. For example, it is possible to use H and G as shortcut commands to initiate the action of Trim End and Trim Start. You will be glad to know that FCP allows customization for shortcuts that means you can add something more than the default keys as per need. Simple go to Final Cut Pro and then visit Commands; here you need to click on Customize and soon you will be able to assign different keys for required tasks.

3.Live Trimming

When we start editing any media clip then one of our major needs is to make that clip shorter but not all available software tools assists in easy trimming. Users of FCP are blessed in this context as they can trim videos on real time basis by using Trim Start, Trim End and Trim Playhead facility.

4.Adjustment Layers

It is possible to create your own motion effects with the help of FCP and they can be also taken from online sources. But the special feature is the adjustment layer that helps to maintain shooting space of camera and apply automatic correction filters on footage so that every clip can be corrected individually with perfect colour blending.

5.Export Faster

Although this software tool is downplayed with the help of unique language but the encoding capabilities of FCP are observed to be very high. It offers rich quality as compared to all other competitive tool and when person is using it on any modern Mac systems then it becomes much faster.

You may also like:

• Top 40 Keyboard Shortcuts for FCP >>
• Troubleshooting Tips for FCP >>

Best Alternative to Final Cut Pro

If you are searching for an alternative to the Final Cut Pro video editing tool then Wondershare Filmora for Mac can be the best choice for you. It comes with a fully stacked type feature set and serves with potential functionality so that professionals can manage all their media editing needs with ease. Wondershare Filmora possesses a drag and drop type interface so that users can create stories in a very artistic manner without sending more time of tool search.

Some of the key features of Wondershare Filmora Includes:

• Titles and Text - Wondershare Filmora extends its support towards animated text.
• Music Library – It is possible to edit or customize music tracks as per need.
• Filters and Overlays – In order to provide professional touch to all edited media files, Wondershare Filmora platform is loaded with advanced overlays and filters.
• Elements – Supports classic graphic needs and various visual effects.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Linux on a Chromebook: The Ultimate Setup Tutorial

How to Install Linux on Chromebook

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Top-Rated MP4 Editor for Windows 8: Professional Results Made Easy

MP4 Editor for Windows 8: Easily Edit MP4 Files on PC

Ollie Mattison

Mar 27, 2024• Proven solutions

MP4 format is quite popular among computer users, therefore there are numerous video editors that support this format. However, when it comes to Windows 8 compatibility, there are very few of them. If you’re looking for a feature-rich and simple to use MP4 editor for Windows 8, you’ve come to the right place. Check the video tutorial about how to edit MP4 videos on Windows 8 first.

In this article, a stylish and versatile MP4 editor for Windows 8 - Wondershare Filmora (Windows 10/8/7/XP/Vista supported) is shared with you. This program enables you to create Hollywood-like home movies with titles, effects, and transitions from all regular videos, audio, and photos. Plus, it offers a free trial for you to evaluate. Just download the free trial of MP4 editor Windows 8 and follow below step by step guide.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Easily Edit MP4 Files on PC

1. Import your MP4 videos

Click Import or directly drop and drop to load your source videos into Filmora after you installed and launched the MOV editor for Windows 8 successfully.

The imported MP4 videos will show as thumbnails in the user’s album’s item tray. Double click it, you can preview them on the right screen (full screen is available), and take snapshots freely.

2. Easy MP4 editing in Windows 8

This MP4 editor for Windows 8 provides professional yet straightforward editing panels to fully meet your different editing requirements.

Timeline Panel

If you want to edit and personalize your MP4 videos, the timeline panel will offer you the most precise editing. Now drag your MP4 videos to the video timeline, and get ready for below edits.

Split, Trim MP4 Videos

Select a clip in the Timeline, drag the Indicator to where you want to split and click the “Split” button. Then the clip will be split into two . Right click the video clip, you can also choose “Delete”, “Copy”, “Paste” option.

Rotate, Crop, Adjust Brightness, Speed, etc

To rotate video, crop some unwanted parts of the video, you can select the editing box as your editing helper. Double click the video clip, or right click and choose Edit option, you’ll go to the edit window.

Add Scene Transition

Click “Transition” tab on the main interface and drag one scene transition you like to your video, or you can right click on a favorite transition and choose the option “Apply to All”, which can apply the certain transition effect to all your videos.

In all, with this MP4 editor for Windows 8, everything is at your fingertips. If you also want to add intro/credits , apply special effects, create picture-in-picture effects, etc., please go to the detailed guide .

3. Save edited MP4 video or share with the worldwide

MP4 video editor for Windows 8 makes all things easier to export your created MP4 videos. If you want to watch your MP4 video on iPhone, iPad, or other portable device, you can click “Device” and choose the option. You can also save videos to your computer in various video format like WMV, AVI, MPEG, etc. In addition, you can upload your video to YouTube, or burn them to DVD for convenient watching your MP4 files on TV.

Also view a step by step video guide on how to edit MP4 files in Windows 8:

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

MP4 format is quite popular among computer users, therefore there are numerous video editors that support this format. However, when it comes to Windows 8 compatibility, there are very few of them. If you’re looking for a feature-rich and simple to use MP4 editor for Windows 8, you’ve come to the right place. Check the video tutorial about how to edit MP4 videos on Windows 8 first.

In this article, a stylish and versatile MP4 editor for Windows 8 - Wondershare Filmora (Windows 10/8/7/XP/Vista supported) is shared with you. This program enables you to create Hollywood-like home movies with titles, effects, and transitions from all regular videos, audio, and photos. Plus, it offers a free trial for you to evaluate. Just download the free trial of MP4 editor Windows 8 and follow below step by step guide.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Easily Edit MP4 Files on PC

1. Import your MP4 videos

Click Import or directly drop and drop to load your source videos into Filmora after you installed and launched the MOV editor for Windows 8 successfully.

The imported MP4 videos will show as thumbnails in the user’s album’s item tray. Double click it, you can preview them on the right screen (full screen is available), and take snapshots freely.

2. Easy MP4 editing in Windows 8

This MP4 editor for Windows 8 provides professional yet straightforward editing panels to fully meet your different editing requirements.

Timeline Panel

If you want to edit and personalize your MP4 videos, the timeline panel will offer you the most precise editing. Now drag your MP4 videos to the video timeline, and get ready for below edits.

Split, Trim MP4 Videos

Select a clip in the Timeline, drag the Indicator to where you want to split and click the “Split” button. Then the clip will be split into two . Right click the video clip, you can also choose “Delete”, “Copy”, “Paste” option.

Rotate, Crop, Adjust Brightness, Speed, etc

To rotate video, crop some unwanted parts of the video, you can select the editing box as your editing helper. Double click the video clip, or right click and choose Edit option, you’ll go to the edit window.

Add Scene Transition

Click “Transition” tab on the main interface and drag one scene transition you like to your video, or you can right click on a favorite transition and choose the option “Apply to All”, which can apply the certain transition effect to all your videos.

In all, with this MP4 editor for Windows 8, everything is at your fingertips. If you also want to add intro/credits , apply special effects, create picture-in-picture effects, etc., please go to the detailed guide .

3. Save edited MP4 video or share with the worldwide

MP4 video editor for Windows 8 makes all things easier to export your created MP4 videos. If you want to watch your MP4 video on iPhone, iPad, or other portable device, you can click “Device” and choose the option. You can also save videos to your computer in various video format like WMV, AVI, MPEG, etc. In addition, you can upload your video to YouTube, or burn them to DVD for convenient watching your MP4 files on TV.

Also view a step by step video guide on how to edit MP4 files in Windows 8:

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

MP4 format is quite popular among computer users, therefore there are numerous video editors that support this format. However, when it comes to Windows 8 compatibility, there are very few of them. If you’re looking for a feature-rich and simple to use MP4 editor for Windows 8, you’ve come to the right place. Check the video tutorial about how to edit MP4 videos on Windows 8 first.

In this article, a stylish and versatile MP4 editor for Windows 8 - Wondershare Filmora (Windows 10/8/7/XP/Vista supported) is shared with you. This program enables you to create Hollywood-like home movies with titles, effects, and transitions from all regular videos, audio, and photos. Plus, it offers a free trial for you to evaluate. Just download the free trial of MP4 editor Windows 8 and follow below step by step guide.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Easily Edit MP4 Files on PC

1. Import your MP4 videos

Click Import or directly drop and drop to load your source videos into Filmora after you installed and launched the MOV editor for Windows 8 successfully.

The imported MP4 videos will show as thumbnails in the user’s album’s item tray. Double click it, you can preview them on the right screen (full screen is available), and take snapshots freely.

2. Easy MP4 editing in Windows 8

This MP4 editor for Windows 8 provides professional yet straightforward editing panels to fully meet your different editing requirements.

Timeline Panel

If you want to edit and personalize your MP4 videos, the timeline panel will offer you the most precise editing. Now drag your MP4 videos to the video timeline, and get ready for below edits.

Split, Trim MP4 Videos

Select a clip in the Timeline, drag the Indicator to where you want to split and click the “Split” button. Then the clip will be split into two . Right click the video clip, you can also choose “Delete”, “Copy”, “Paste” option.

Rotate, Crop, Adjust Brightness, Speed, etc

To rotate video, crop some unwanted parts of the video, you can select the editing box as your editing helper. Double click the video clip, or right click and choose Edit option, you’ll go to the edit window.

Add Scene Transition

Click “Transition” tab on the main interface and drag one scene transition you like to your video, or you can right click on a favorite transition and choose the option “Apply to All”, which can apply the certain transition effect to all your videos.

In all, with this MP4 editor for Windows 8, everything is at your fingertips. If you also want to add intro/credits , apply special effects, create picture-in-picture effects, etc., please go to the detailed guide .

3. Save edited MP4 video or share with the worldwide

MP4 video editor for Windows 8 makes all things easier to export your created MP4 videos. If you want to watch your MP4 video on iPhone, iPad, or other portable device, you can click “Device” and choose the option. You can also save videos to your computer in various video format like WMV, AVI, MPEG, etc. In addition, you can upload your video to YouTube, or burn them to DVD for convenient watching your MP4 files on TV.

Also view a step by step video guide on how to edit MP4 files in Windows 8:

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

MP4 format is quite popular among computer users, therefore there are numerous video editors that support this format. However, when it comes to Windows 8 compatibility, there are very few of them. If you’re looking for a feature-rich and simple to use MP4 editor for Windows 8, you’ve come to the right place. Check the video tutorial about how to edit MP4 videos on Windows 8 first.

In this article, a stylish and versatile MP4 editor for Windows 8 - Wondershare Filmora (Windows 10/8/7/XP/Vista supported) is shared with you. This program enables you to create Hollywood-like home movies with titles, effects, and transitions from all regular videos, audio, and photos. Plus, it offers a free trial for you to evaluate. Just download the free trial of MP4 editor Windows 8 and follow below step by step guide.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Easily Edit MP4 Files on PC

1. Import your MP4 videos

Click Import or directly drop and drop to load your source videos into Filmora after you installed and launched the MOV editor for Windows 8 successfully.

The imported MP4 videos will show as thumbnails in the user’s album’s item tray. Double click it, you can preview them on the right screen (full screen is available), and take snapshots freely.

2. Easy MP4 editing in Windows 8

This MP4 editor for Windows 8 provides professional yet straightforward editing panels to fully meet your different editing requirements.

Timeline Panel

If you want to edit and personalize your MP4 videos, the timeline panel will offer you the most precise editing. Now drag your MP4 videos to the video timeline, and get ready for below edits.

Split, Trim MP4 Videos

Select a clip in the Timeline, drag the Indicator to where you want to split and click the “Split” button. Then the clip will be split into two . Right click the video clip, you can also choose “Delete”, “Copy”, “Paste” option.

Rotate, Crop, Adjust Brightness, Speed, etc

To rotate video, crop some unwanted parts of the video, you can select the editing box as your editing helper. Double click the video clip, or right click and choose Edit option, you’ll go to the edit window.

Add Scene Transition

Click “Transition” tab on the main interface and drag one scene transition you like to your video, or you can right click on a favorite transition and choose the option “Apply to All”, which can apply the certain transition effect to all your videos.

In all, with this MP4 editor for Windows 8, everything is at your fingertips. If you also want to add intro/credits , apply special effects, create picture-in-picture effects, etc., please go to the detailed guide .

3. Save edited MP4 video or share with the worldwide

MP4 video editor for Windows 8 makes all things easier to export your created MP4 videos. If you want to watch your MP4 video on iPhone, iPad, or other portable device, you can click “Device” and choose the option. You can also save videos to your computer in various video format like WMV, AVI, MPEG, etc. In addition, you can upload your video to YouTube, or burn them to DVD for convenient watching your MP4 files on TV.

Also view a step by step video guide on how to edit MP4 files in Windows 8:

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Also read: