Flip Video Clips in Final Cut Pro: A 4-Step Guide for Beginners

4 Detailed Steps to Flip a Clip in Final Cut Pro

Benjamin Arango

Mar 27, 2024• Proven solutions

The Final Cut Pro is a video editing software on Mac Computer that offers a wide range of photo and video orientation options that can help you make your video and photo the way you would want it to appear. If you have vertically filmed a video on your mobile phone and you want to twist it up, down, or place it at any angle without changing its quality, this would be the best tool for you. Flipping clips in the Final Cut Pro by following the steps below.

The video below shows how simple it is to flip video in Final Cut Pro.

If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.

How to Flip a Clip in Final Cut Pro

As one of the most popular professional video editing software, Final Cut Pro is an easy-to-use software that can enable you to fully customize your videos by flipping, rotating and doing all sorts of editing tasks. Follow the below simple steps to flip, crop, resize or move clips.

Step 1: Select a Clip on the Timeline

The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.

Step 2: Access the Transform Option

There is a popup menu for you to get the Transform tool. It is in the lower-left corner of the viewer so it should be easy to see. You can use the shortcut as well which can be done by pressing (shift-T). Or Control-click in the viewer and choose Transform.

Step 3: Rotate and Re-size Video Clips

You can now do the following steps to rotate the video clip and change the size as well:

There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.

Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.

The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.

Step 4: Flipping video clips

Click the video clips that you want to flip in the timeline and make sure it is highlighted and then click the Inspector icon on the right side to enter the Inspector panel in which you will then see the Transform option.

The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
The Rotation point allows you to rotate the image around its anchor points.
The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
The Anchor X and Y allows you to Move the image’s center point.

An Easier Way to Flip a Clip in Final Cut Pro Alternative

If you’d like an easier way to filp a clip, Wondershare Filmora will be the best choice. As an easy to use video editor, Wondershare Filmora has also amazed the users by its feature of flipping the clip. You can easily flip the clip in clockwise, anti-clockwise, horizontal or vertical directions. There are many effects and features available in Wondershare Filmora that you can apply in your video.

Features:

Allow removing the background noise
Editing videos and export in multiple formats
Changing the background and adding the special effects to it
Adjusting the white balance in the clips

Flipping the clips more easily in Wondershare Filmora:

Step1: Importing the original video clip:

After the launch of Wondershare Filmora, click on the new project to start and click on Import for browsing from the folder. Even you can drag the videos in the media library. After importing all the images, thumbnails are visible on the left corner for the preview on the screen.

Step 2: Flipping the whole video:

When you double-click on the video, the editing panel appears on the screen, and you go to the Video tab to use the transform options. There are different options in the transform menu, including flip, rotate position and scale.

Flipping only a single part of the video:

Wondershare Filmora also allows you to flip a few parts of the video instead of whole. Just move the play head towards the position where you want the split. Click on the icon of Scissors in the menu.

Exporting the flip video:

After the outcome, click on the Export option in the middle on the right side to save the flip video. The pop-up window will appear on the screen, and choose the configuration according to your choice of playing the video. You can even upload the videos on YouTube or burn them to DVD to save them. You can even apply unique effects to your video.

Do you like the basic tutorial about Apple Final Cut Pro? Professional video editing software like FCPX is always popular among creators. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

After you have finished doing all the editing and transformation, you can then click done so that you get your final product. In case the results are not satisfactory you can click the arrow on the right side of each control to get back to the start and begin afresh.

In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The video below shows how simple it is to flip video in Final Cut Pro.

If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.

How to Flip a Clip in Final Cut Pro

Step 1: Select a Clip on the Timeline

The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.

Step 2: Access the Transform Option

Step 3: Rotate and Re-size Video Clips

You can now do the following steps to rotate the video clip and change the size as well:

There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.

Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.

The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.

Step 4: Flipping video clips

The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
The Rotation point allows you to rotate the image around its anchor points.
The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
The Anchor X and Y allows you to Move the image’s center point.

An Easier Way to Flip a Clip in Final Cut Pro Alternative

Features:

Allow removing the background noise
Editing videos and export in multiple formats
Changing the background and adding the special effects to it
Adjusting the white balance in the clips

Flipping the clips more easily in Wondershare Filmora:

Step1: Importing the original video clip:

Step 2: Flipping the whole video:

Flipping only a single part of the video:

Exporting the flip video:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The video below shows how simple it is to flip video in Final Cut Pro.

If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.

How to Flip a Clip in Final Cut Pro

Step 1: Select a Clip on the Timeline

The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.

Step 2: Access the Transform Option

Step 3: Rotate and Re-size Video Clips

You can now do the following steps to rotate the video clip and change the size as well:

There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.

Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.

The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.

Step 4: Flipping video clips

The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
The Rotation point allows you to rotate the image around its anchor points.
The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
The Anchor X and Y allows you to Move the image’s center point.

An Easier Way to Flip a Clip in Final Cut Pro Alternative

Features:

Allow removing the background noise
Editing videos and export in multiple formats
Changing the background and adding the special effects to it
Adjusting the white balance in the clips

Flipping the clips more easily in Wondershare Filmora:

Step1: Importing the original video clip:

Step 2: Flipping the whole video:

Flipping only a single part of the video:

Exporting the flip video:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The video below shows how simple it is to flip video in Final Cut Pro.

If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.

How to Flip a Clip in Final Cut Pro

Step 1: Select a Clip on the Timeline

The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.

Step 2: Access the Transform Option

Step 3: Rotate and Re-size Video Clips

You can now do the following steps to rotate the video clip and change the size as well:

There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.

Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.

The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.

Step 4: Flipping video clips

The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
The Rotation point allows you to rotate the image around its anchor points.
The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
The Anchor X and Y allows you to Move the image’s center point.

An Easier Way to Flip a Clip in Final Cut Pro Alternative

Features:

Allow removing the background noise
Editing videos and export in multiple formats
Changing the background and adding the special effects to it
Adjusting the white balance in the clips

Flipping the clips more easily in Wondershare Filmora:

Step1: Importing the original video clip:

Step 2: Flipping the whole video:

Flipping only a single part of the video:

Exporting the flip video:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Resize with Ease: A Picture Ratio Calculation Tool

How Do You Find the Picture Ratio Calculator?

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Aspect ratios are critical elements in photography, although you don’t have to go that deep! Still, you are here as you understand the significance of using aspect ratios in your projects and thus are looking to find the best picture ratio calculator.

In this guide, we’ll talk about everything you need to know about the photo ratio calculator.

Part 1 What is Picture Size Ratio?

As already mentioned, a picture size ratio refers to calculating or determining the Ratio of an image. And, it’s accomplished by using apicture ratio calculator. So, for example, the picture size ratio could vary from 1:1, 4:3, 3:2, 16:9, etc.

You can visualize this aspect ratio by allocating an image’s width and height units. For example, a 6×4 inch image has a 3:2 aspect ratio, whereas a 1920×1080 pixel video includes a 16:9 aspect ratio.

Fact Check:

An aspect ratio does not contain attached units—instead, it shows how large the width compared to the height, meaning that an image measured in centimeters will have the same aspect ratio even if measured in inches.

The relationship between its height and width decides the shape and Ratio instead of the image’s actual size.

Different aspect ratios consist of varying effects on the image you use. For example, an image set in a 1:1 ratio vs. a 5:4 ratio changes the composition and perception of the photo.

Types of picture size ratios

1:1 Ratio

A 1:1 ratio includes an image’s width and height are square and thus equal. Some standard 1:1 ratios are an 8″x8″ photo, a 1080 x 1080 pixel image generally used for mobile screens, print photographs, and social media platforms.

3:2 Ratio

The 3:2 Ratio is generally 35mm film and photography and is still extensively used for prints. Images framed at 6″x4″ or 1080×720 pixels set within this aspect ratio.

5:4 Ratio

Last but not least, this Ratio is standard in photography and art prints and photography.

In the following sections, let’s uncover more about the photo aspect ratio and its related calculator!

Part 2 What is 1920x1080 in Ratio?

1920 x 1080 is itself a 16:9 aspect ratio. By default, DSLRs, smartphones, and most modern camcorders record video at 1920 x 1080.

Part 3 How Do You Find the Ratio of an Image?

Before finding the image ratio, understand that there’s a difference between image size and image ratio.

Unlike aspect ratios, image size shows the actual width and height in pixels. Image size refers to the image dimensions. You can measure its dimensions in any unit, but you’ll generally see pixels used for digital or web images and inches used for print images.

It’s essential to note that two different images containing the same aspect ratio may not have the exact dimensions of an image. For instance, the image has 1920×1080 pixels has 16:9 aspect ratios, and an image sized at 1280×720 pixels has a 16:9 aspect ratio.

You can use thistool to measure the aspect ratio of images. Here, match either ratio width and ratio and height or pixel width and pixel height to find the aspect ratio in thisimage size ratio calculator.

Part 4 1920x1080 Aspect Ratio and 16:9 Aspect Ratio Differences

These are almost the same. The only difference is that of the pixels. If you cancel the numbers 1920 and 1080, they will automatically come as 16 and 9. 1920 x 1080 is a 16:9 aspect ratio.

Part 5 The Resolution Calculator (Image Ratio Calculator)

To use a picture aspect ratio calculator, you need to understand the following.

Understand the following five variables:

● H1 Height of the initial image

● W1 Width of the initial image

● H2 Height of the final image

● W2 Width of the final image

● A percentage - the proportion of the initial image’s ratio to the final image’s ratio.

The aspect ratio formulas that sync the quantities mentioned above for the ratio converter are:

H1/W1 = H2/W2,

H1 * A% = H2, and

W1 * A% = W2

You are not required to understand the details by heart; if the initial resolution is generally used, use the list to select the ideal ratio:

Proportions

● 4:3,

● 3:2,

● 16:9,

● 16:10,

● 1:1, square, in some social networks,

● 85:1,

Pixels

● 2048:1536, iPad with Retina screen;

● 1920:1080, HD TV, iPhone 6 plus; and

● 800:600, traditional television & computer monitor standard.

Part 6 A Practical Explanation about Aspect Ratios in Filmora

Want to find thephoto aspect ratio calculatorquickly? Waste no more time calculating formulas and launch Wondershare Filmora Video Editor for the purpose. It is a robust video editing platform within which you can change the aspect ratios of images and videos and do the same with different methods. You can even do it under the editing panel as well. However, we won’t suggest going much deep when you’re looking to find the idealpicture ratio calculator.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

The most standard aspect ratios of videos are 4:3 and 16:9. Despite these two, 9:16 and 1:1 get famous over social media platforms these days.

As far as you may know, various media players help you to transform the aspect ratio in real-time when playback. Yet this modification is temporary. You are required to change the aspect ratio again next time you open them.

But, changing the aspect ratios is pretty different than other media players. You need to launch the program and create a new project simply. But, before you do a new project, you can easily change it at the beginning panel.

The Filmora assists you in changing the aspect ratio of the project after downloading. Hit the drop-down tab, and you will choose the options among 16:9, 4:3, 1:1, 9:16, and 21:9 aspect ratios.

Key Takeaways from This Episode

● 1 –An overview of the picture aspect ratio.

● 2 – Formula to measure the aspect ratio of an image.

● 3 –Practical understanding of aspect ratios with WondershareFilmora

● So here, we end our topic byusinga picture ratio calculator. We’ve described how to measure the image aspect ratio in detail. By now, you must have got how important the concept of aspect ratio is in photography or video editing.

Try It Free Try It Free

In this guide, we’ll talk about everything you need to know about the photo ratio calculator.

Part 1 What is Picture Size Ratio?

Fact Check:

The relationship between its height and width decides the shape and Ratio instead of the image’s actual size.

Different aspect ratios consist of varying effects on the image you use. For example, an image set in a 1:1 ratio vs. a 5:4 ratio changes the composition and perception of the photo.

Types of picture size ratios

1:1 Ratio

3:2 Ratio

The 3:2 Ratio is generally 35mm film and photography and is still extensively used for prints. Images framed at 6″x4″ or 1080×720 pixels set within this aspect ratio.

5:4 Ratio

Last but not least, this Ratio is standard in photography and art prints and photography.

In the following sections, let’s uncover more about the photo aspect ratio and its related calculator!

Part 2 What is 1920x1080 in Ratio?

1920 x 1080 is itself a 16:9 aspect ratio. By default, DSLRs, smartphones, and most modern camcorders record video at 1920 x 1080.

Part 3 How Do You Find the Ratio of an Image?

Before finding the image ratio, understand that there’s a difference between image size and image ratio.

Part 4 1920x1080 Aspect Ratio and 16:9 Aspect Ratio Differences

These are almost the same. The only difference is that of the pixels. If you cancel the numbers 1920 and 1080, they will automatically come as 16 and 9. 1920 x 1080 is a 16:9 aspect ratio.

Part 5 The Resolution Calculator (Image Ratio Calculator)

To use a picture aspect ratio calculator, you need to understand the following.

Understand the following five variables:

● H1 Height of the initial image

● W1 Width of the initial image

● H2 Height of the final image

● W2 Width of the final image

● A percentage - the proportion of the initial image’s ratio to the final image’s ratio.

The aspect ratio formulas that sync the quantities mentioned above for the ratio converter are:

H1/W1 = H2/W2,

H1 * A% = H2, and

W1 * A% = W2

You are not required to understand the details by heart; if the initial resolution is generally used, use the list to select the ideal ratio:

Proportions

● 4:3,

● 3:2,

● 16:9,

● 16:10,

● 1:1, square, in some social networks,

● 85:1,

Pixels

● 2048:1536, iPad with Retina screen;

● 1920:1080, HD TV, iPhone 6 plus; and

● 800:600, traditional television & computer monitor standard.

Part 6 A Practical Explanation about Aspect Ratios in Filmora

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

The most standard aspect ratios of videos are 4:3 and 16:9. Despite these two, 9:16 and 1:1 get famous over social media platforms these days.

The Filmora assists you in changing the aspect ratio of the project after downloading. Hit the drop-down tab, and you will choose the options among 16:9, 4:3, 1:1, 9:16, and 21:9 aspect ratios.

Key Takeaways from This Episode

● 1 –An overview of the picture aspect ratio.

● 2 – Formula to measure the aspect ratio of an image.

● 3 –Practical understanding of aspect ratios with WondershareFilmora

Try It Free Try It Free

In this guide, we’ll talk about everything you need to know about the photo ratio calculator.

Part 1 What is Picture Size Ratio?

Fact Check:

The relationship between its height and width decides the shape and Ratio instead of the image’s actual size.

Different aspect ratios consist of varying effects on the image you use. For example, an image set in a 1:1 ratio vs. a 5:4 ratio changes the composition and perception of the photo.

Types of picture size ratios

1:1 Ratio

3:2 Ratio

The 3:2 Ratio is generally 35mm film and photography and is still extensively used for prints. Images framed at 6″x4″ or 1080×720 pixels set within this aspect ratio.

5:4 Ratio

Last but not least, this Ratio is standard in photography and art prints and photography.

In the following sections, let’s uncover more about the photo aspect ratio and its related calculator!

Part 2 What is 1920x1080 in Ratio?

1920 x 1080 is itself a 16:9 aspect ratio. By default, DSLRs, smartphones, and most modern camcorders record video at 1920 x 1080.

Part 3 How Do You Find the Ratio of an Image?

Before finding the image ratio, understand that there’s a difference between image size and image ratio.

Part 4 1920x1080 Aspect Ratio and 16:9 Aspect Ratio Differences

These are almost the same. The only difference is that of the pixels. If you cancel the numbers 1920 and 1080, they will automatically come as 16 and 9. 1920 x 1080 is a 16:9 aspect ratio.

Part 5 The Resolution Calculator (Image Ratio Calculator)

To use a picture aspect ratio calculator, you need to understand the following.

Understand the following five variables:

● H1 Height of the initial image

● W1 Width of the initial image

● H2 Height of the final image

● W2 Width of the final image

● A percentage - the proportion of the initial image’s ratio to the final image’s ratio.

The aspect ratio formulas that sync the quantities mentioned above for the ratio converter are:

H1/W1 = H2/W2,

H1 * A% = H2, and

W1 * A% = W2

You are not required to understand the details by heart; if the initial resolution is generally used, use the list to select the ideal ratio:

Proportions

● 4:3,

● 3:2,

● 16:9,

● 16:10,

● 1:1, square, in some social networks,

● 85:1,

Pixels

● 2048:1536, iPad with Retina screen;

● 1920:1080, HD TV, iPhone 6 plus; and

● 800:600, traditional television & computer monitor standard.

Part 6 A Practical Explanation about Aspect Ratios in Filmora

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

The most standard aspect ratios of videos are 4:3 and 16:9. Despite these two, 9:16 and 1:1 get famous over social media platforms these days.

The Filmora assists you in changing the aspect ratio of the project after downloading. Hit the drop-down tab, and you will choose the options among 16:9, 4:3, 1:1, 9:16, and 21:9 aspect ratios.

Key Takeaways from This Episode

● 1 –An overview of the picture aspect ratio.

● 2 – Formula to measure the aspect ratio of an image.

● 3 –Practical understanding of aspect ratios with WondershareFilmora

Try It Free Try It Free

In this guide, we’ll talk about everything you need to know about the photo ratio calculator.

Part 1 What is Picture Size Ratio?

Fact Check:

The relationship between its height and width decides the shape and Ratio instead of the image’s actual size.

Different aspect ratios consist of varying effects on the image you use. For example, an image set in a 1:1 ratio vs. a 5:4 ratio changes the composition and perception of the photo.

Types of picture size ratios

1:1 Ratio

3:2 Ratio

The 3:2 Ratio is generally 35mm film and photography and is still extensively used for prints. Images framed at 6″x4″ or 1080×720 pixels set within this aspect ratio.

5:4 Ratio

Last but not least, this Ratio is standard in photography and art prints and photography.

In the following sections, let’s uncover more about the photo aspect ratio and its related calculator!

Part 2 What is 1920x1080 in Ratio?

1920 x 1080 is itself a 16:9 aspect ratio. By default, DSLRs, smartphones, and most modern camcorders record video at 1920 x 1080.

Part 3 How Do You Find the Ratio of an Image?

Before finding the image ratio, understand that there’s a difference between image size and image ratio.

Part 4 1920x1080 Aspect Ratio and 16:9 Aspect Ratio Differences

These are almost the same. The only difference is that of the pixels. If you cancel the numbers 1920 and 1080, they will automatically come as 16 and 9. 1920 x 1080 is a 16:9 aspect ratio.

Part 5 The Resolution Calculator (Image Ratio Calculator)

To use a picture aspect ratio calculator, you need to understand the following.

Understand the following five variables:

● H1 Height of the initial image

● W1 Width of the initial image

● H2 Height of the final image

● W2 Width of the final image

● A percentage - the proportion of the initial image’s ratio to the final image’s ratio.

The aspect ratio formulas that sync the quantities mentioned above for the ratio converter are:

H1/W1 = H2/W2,

H1 * A% = H2, and

W1 * A% = W2

You are not required to understand the details by heart; if the initial resolution is generally used, use the list to select the ideal ratio:

Proportions

● 4:3,

● 3:2,

● 16:9,

● 16:10,

● 1:1, square, in some social networks,

● 85:1,

Pixels

● 2048:1536, iPad with Retina screen;

● 1920:1080, HD TV, iPhone 6 plus; and

● 800:600, traditional television & computer monitor standard.

Part 6 A Practical Explanation about Aspect Ratios in Filmora

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

The most standard aspect ratios of videos are 4:3 and 16:9. Despite these two, 9:16 and 1:1 get famous over social media platforms these days.

The Filmora assists you in changing the aspect ratio of the project after downloading. Hit the drop-down tab, and you will choose the options among 16:9, 4:3, 1:1, 9:16, and 21:9 aspect ratios.

Key Takeaways from This Episode

● 1 –An overview of the picture aspect ratio.

● 2 – Formula to measure the aspect ratio of an image.

● 3 –Practical understanding of aspect ratios with WondershareFilmora

The Capabilities of Final Cut Pro Have Evolved Significantly and Here We List Top 10 Famous Movies Made by Final Cut Pro

Top 10 Famous Movies Made By Final Cut Pro

Benjamin Arango

Mar 27, 2024• Proven solutions

Developed as video editing software that has been developed by Apple, Final Cut Pro began life as software designed to made simple video editing accessible for video hobbyists and independent filmmakers. However, in recent years the capabilities of Final Cut Pro have evolved significantly and we are now seeing major Hollywood movies also being edited with this software.

Do you want to turn your own video into a Hollywood film-like video? Check this guide on How to make big-budget cinematic look video with Final Cut Pro.

You may also like: 8 Best Movie Trailer Template for After Effects

Top 10 Movies Made by Final Cut Pro

Let’s take a look at ten major movies that have been edited using Final Cut Pro.

1. The Social Network (2010)

Based on the rise of the phenomenon that we now know as Facebook, The Social Network starred Jesse Eisenberg, Andrew Garfield and Justin Timberlake. The movie performed well at the box office and was also positively received by movie critics.

The film won an Academy Award for Best Editing, collected by Kirk Baxter and Angus Wall. They used Final Cut Pro to edit the film, and one of the things they really like about the software is the ability to do multiple timelines. Final Cut Pro was also used in this movie to enable face replacement in a number of scenes. Two of the key characters in the movie are twins, and so the scenes were filmed with actors (who weren’t twins) and then the editing software was used to create the illusion that they were twins. Digital matte paintings was another feature of this movie that relied on the functionality of Final Cut Pro.

2. The Girl with the Dragon Tattoo (2011)

This was the US adaptation of the earlier Swedish film of the same name - based on the novel by Stieg Larsson. Starring Daniel Craig and Rooney Mara, the story is a crime thriller trying to uncover the secrets surrounding the disappearance of a young girl from a wealthy family.

One of the challenges with this movie was that there were a lot of invisible effects throughout the film. Final Cut Pro was used to achieve the shot stabilization and the visual enhancements - everything from matte painting to creating seasonal elements such as snow.

3. John Carter (2011)

A science fiction adventure, this film performed so badly at the box office that it caused major financial problems for its studio Disney.

The editing of the John Carter movie was a particular challenge as a lot of the action was shot twice during the troubled production. The editor Eric Zumbrunnen used Final Cut Pro to piece the various elements together. With a huge range of CGI and creature effects to deal with, the editing process on this movie was extremely complex. Final Cut Pro was used to create a lot of the background detail need to bring the green screen scenes to life.

4. 500 Days of Summer (2009)

This was a cute, quirky romantic comedy starring Joseph Gordon-Levitt and Zooey Deschanel.

Editing on the movie was by Alan Edward Bell in DVCPro HD format on Final Cut Pro. Because the storyline of the movie unfolds in a non-linear timeline, the workflow feature of Final Cut Pro made it easier to manage the sequencing of the different scenes. There were also 250 invisible effects which were created using Final Cut Pro’s editing features.

5. X-Men Origins: Wolverine (2009)

Continuing the X-Men franchise, this installment traces Wolverine’s childhood and the relationship with his brother. It didn’t really appeal to X-Men fans or movie critics.

Editing on the movie was by Nicolas De Toth and Megan Gill. There were a number of continuity glitches identified during the production of this movie but De Toth and Gill used Final Pro Cut to keep a consistent flow to the narrative. What is interesting about the editing on this movie is that all the cutting of the scenes required was done on Final Cut Pro 5, taking advantage of the software’s HD abilities and also the multi-clip features.

6. Burn After Reading (2008)

A black comedy from the talented brothers Joel and Ethan Coen, they wrote, produced, edited, and directed the movie.

The Coen brothers used Final Cut Pro on this movie because it was simple and easy to use - they were blocking together the rough cuts as the scenes were being shot, and Final Cut Pro gave them the flexibility that they needed to edit quickly. On this movie most of the action was shot using Sony cameras but there were several scenes on which a RED camera was added when an additional camera was needed. Even though there is a significantly different workflow between the two types of camera, the RED material was able to be integrated smoothly with the Sony footage.

7. No Country for Old Men (2007)

A neo-Western thriller from Coen brothers. They directed, wrote, and edited this production.

The movie was also nominated for an Academy Award for Best Editing for editor Roderick Jaynes (a pseudonym for Joel and Ethan Coen).

Directing and editing a movie brings the two processes a lot closer together for the Coen brothers. An easy to use product such as Final Cut Pro ensures that they can construct the movie’s narrative using the timeline features of the product. This movie marked a chance in approach for the Coen brothers, who took advantage of the better resolution DVCPRO HD for their cutting process compared to earlier films that were cut at DV resolution.

8. 300 (2007)

Based on a graphic novel by Frank Miller, this is the fictionalized retelling of the Battle Termopylae - part of the Persian Wars. Directed by Zack Snyder, the movie was filmed with a super-imposition chroma key technique to help replicate the imagery of the original comic book. Editing on the movie was by William Hoy.

To capture the graphic novel look and feel of the film’s images, editor Hoy used a number of the key Final Cut Pro features such as the adjustment layer and blending modes to create depth and mood. With the look and feel of this movie so dependent on the effects created, editor Hoy spent a lot of time debating what was being added visually to each shot and how this would impact the length and continuity of each scene.

9. Sky Captain and the World of Tomorrow (2004)

With big name stars (Gwyneth Paltrow and Jude Law), this was an unusual film that used digital artists to build multi-layered 2D and 3D backgrounds for live action footage, with hand-drawn storyboards recreated as computer-generated 3D animatics. Critically it was well received but didn’t set the box office alight.

Editing on the movie was by Sabrina Plisco.

Final Cut Pro was particularly critical to create a scene between two characters that was shot in a physical set (unlike the digital soundstage that was used for the rest of the movie). Final Cut Pro allowed the filmmakers to line up the animatics with the live onstage footage. One of the challenges with this movie is that the editors had to manually assign time-codes to each take - the clips were then rendered out and sorted so that they could be used on a Final Cut Pro SD workstation. This approach was also used to create the master off-line cut. Batch lists of the cuts were then imported into Final Cut Pro.

10. Cold Mountain (2003)

This is an epic Civil War drama based on the novel by Charles Frazier. Starring Jude Law, Nicole Kidman, and Renee Zellweger this was critically acclaimed and performed reasonably well at the box office.

The movie was also nominated for an Academy Award for Best Editing let by editor Walter Murch.

This was really seen as the breakthrough movie for the use of Final Cut Pro in Hollywood Movies. An entire book has been produced analysing how editor Murch used Final Cut Pro to edit the movie and analysis its impact on future cinema productions. Editor Murch believes that the use of Final Cut Pro on this movie indirected affected the ultimate creative outcome. In particular, the use of the DVD authoring capabilities on Final Cut Pro meant that the editing team was able to look at the material more often, sharing it with more people, and changing the way that they looked at certain scenes.

While Hollywood movies require editing tools of the highest order, the range of effects that you can achieve using Final Cut Pro is impressive - as well as the standard ripple, roll, slip, slide, scrub, razor blade and time remapping edit functions, Final Cut Pro also comes with a range of video transitions and a range of video and audio filters that will take your film project to the next level.

It is clear that Final Cut Pro is definitely now a star in the editing of Hollywood movies, it is time to make it a star in editing your movies as well.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Do you want to turn your own video into a Hollywood film-like video? Check this guide on How to make big-budget cinematic look video with Final Cut Pro.

You may also like: 8 Best Movie Trailer Template for After Effects

Top 10 Movies Made by Final Cut Pro

Let’s take a look at ten major movies that have been edited using Final Cut Pro.

1. The Social Network (2010)

2. The Girl with the Dragon Tattoo (2011)

3. John Carter (2011)

A science fiction adventure, this film performed so badly at the box office that it caused major financial problems for its studio Disney.

4. 500 Days of Summer (2009)

This was a cute, quirky romantic comedy starring Joseph Gordon-Levitt and Zooey Deschanel.

5. X-Men Origins: Wolverine (2009)

Continuing the X-Men franchise, this installment traces Wolverine’s childhood and the relationship with his brother. It didn’t really appeal to X-Men fans or movie critics.

6. Burn After Reading (2008)

A black comedy from the talented brothers Joel and Ethan Coen, they wrote, produced, edited, and directed the movie.

7. No Country for Old Men (2007)

A neo-Western thriller from Coen brothers. They directed, wrote, and edited this production.

The movie was also nominated for an Academy Award for Best Editing for editor Roderick Jaynes (a pseudonym for Joel and Ethan Coen).

8. 300 (2007)

9. Sky Captain and the World of Tomorrow (2004)

Editing on the movie was by Sabrina Plisco.

10. Cold Mountain (2003)

The movie was also nominated for an Academy Award for Best Editing let by editor Walter Murch.

It is clear that Final Cut Pro is definitely now a star in the editing of Hollywood movies, it is time to make it a star in editing your movies as well.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Do you want to turn your own video into a Hollywood film-like video? Check this guide on How to make big-budget cinematic look video with Final Cut Pro.

You may also like: 8 Best Movie Trailer Template for After Effects

Top 10 Movies Made by Final Cut Pro

Let’s take a look at ten major movies that have been edited using Final Cut Pro.

1. The Social Network (2010)

2. The Girl with the Dragon Tattoo (2011)

3. John Carter (2011)

A science fiction adventure, this film performed so badly at the box office that it caused major financial problems for its studio Disney.

4. 500 Days of Summer (2009)

This was a cute, quirky romantic comedy starring Joseph Gordon-Levitt and Zooey Deschanel.

5. X-Men Origins: Wolverine (2009)

Continuing the X-Men franchise, this installment traces Wolverine’s childhood and the relationship with his brother. It didn’t really appeal to X-Men fans or movie critics.

6. Burn After Reading (2008)

A black comedy from the talented brothers Joel and Ethan Coen, they wrote, produced, edited, and directed the movie.

7. No Country for Old Men (2007)

A neo-Western thriller from Coen brothers. They directed, wrote, and edited this production.

The movie was also nominated for an Academy Award for Best Editing for editor Roderick Jaynes (a pseudonym for Joel and Ethan Coen).

8. 300 (2007)

9. Sky Captain and the World of Tomorrow (2004)

Editing on the movie was by Sabrina Plisco.

10. Cold Mountain (2003)

The movie was also nominated for an Academy Award for Best Editing let by editor Walter Murch.

It is clear that Final Cut Pro is definitely now a star in the editing of Hollywood movies, it is time to make it a star in editing your movies as well.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Do you want to turn your own video into a Hollywood film-like video? Check this guide on How to make big-budget cinematic look video with Final Cut Pro.

You may also like: 8 Best Movie Trailer Template for After Effects

Top 10 Movies Made by Final Cut Pro

Let’s take a look at ten major movies that have been edited using Final Cut Pro.

1. The Social Network (2010)

2. The Girl with the Dragon Tattoo (2011)

3. John Carter (2011)

A science fiction adventure, this film performed so badly at the box office that it caused major financial problems for its studio Disney.

4. 500 Days of Summer (2009)

This was a cute, quirky romantic comedy starring Joseph Gordon-Levitt and Zooey Deschanel.

5. X-Men Origins: Wolverine (2009)

Continuing the X-Men franchise, this installment traces Wolverine’s childhood and the relationship with his brother. It didn’t really appeal to X-Men fans or movie critics.

6. Burn After Reading (2008)

A black comedy from the talented brothers Joel and Ethan Coen, they wrote, produced, edited, and directed the movie.

7. No Country for Old Men (2007)

A neo-Western thriller from Coen brothers. They directed, wrote, and edited this production.

The movie was also nominated for an Academy Award for Best Editing for editor Roderick Jaynes (a pseudonym for Joel and Ethan Coen).

8. 300 (2007)

9. Sky Captain and the World of Tomorrow (2004)

Editing on the movie was by Sabrina Plisco.

10. Cold Mountain (2003)

The movie was also nominated for an Academy Award for Best Editing let by editor Walter Murch.

It is clear that Final Cut Pro is definitely now a star in the editing of Hollywood movies, it is time to make it a star in editing your movies as well.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

A Beginner’s Guide to Adding Titles, Captions, and Subtitles in FCPX

How to Add Titles in Final Cut Pro X

Benjamin Arango

Mar 27, 2024• Proven solutions

We add text titles to our projects to tell the audience something they can’t figure out on their own, such as the title of our program, the name of the person speaking, or technical details about a subject.

This is a basic tutorial about Apple Final Cut Pro X, professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Final Cut Pro X has almost 200 different text effects that we can add, but the process of adding titles is essentially the same. Adding titles is what this article is about.

DEFINITIONS

Just to keep us all on the same page, here are my definitions of key terms related to text:

Text or titles. Words placed on the screen. I use these terms interchangeably.
Superimpose. Text displayed on the the screen with other video below it. These are also called “supers” or “keys.”
Full-screen. Text which occupies the entire screen.
Lower-third. Text which fits below a person talking; in the “lower-third” of the screen.
Info-graphics. Full-screen text which is superimposed on a graphic, generally used to convey technical information. Typical uses are sports statistics or other information which is easier to convey using text than having someone read the words.

JUST THE BASICS

I’d like to introduce “Yertle,” he’s a sea turtle and the star of this article. (Footage courtesy of Jim Walker and Lobsters Gone Wild Productions.)

At its simplest, we use titles to display his (its?) name.

In the Timeline, put the playhead where you want a title to appear and type Shift+Control+T. This inserts the default lower-third title at the position of the playhead. The title, like almost all titles, has a default duration of 10:00 seconds.

Look at the Browser and see the results of your work. A lower-third title is superimposed over the video in the lower left corner. (I’ll talk about formatting the text in a few paragraphs.)

NOTE: The big limitation of this lower-third title is that it can only be positioned in the left corner. Moving it to the center or right corner requires manual adjustment.

You position or trim a title the same as any video clip: drag the clip to a different location, or drag an edge to change its duration.

Select that title and delete it by pressing the Delete key.

This time, type Control+T and the default full-screen title appears in the center of the screen. Again, this has a default duration of 10 seconds.

If you look right in the center of the screen, you’ll see the word “Title.” Yes, its darn near invisible. And, yes, it looks, um, ugly. However, we have a TON of formatting control to make this look however we want.

Select and delete that full-screen title.

There’s one more way to apply a title: dragging from the Titles Browser.

Click the Title icon in the Toolbar. This displays the contents of the Title Browser. The column on the left displays title categories, the icons on the right indicate individual titles, the search box at the bottom allows you to search for specific titles by name, while the number in the lower right indicates the number of titles currently displayed. (Your number may not match mine because I’ve added a few custom titles to my system.)

Let’s add a totally ridiculous title to our turtle - drag Clouds from the Title Browser and place it above the clip at the point where you want a title to appear.

NOTE: I’m using a marker in the Timeline to help me find the same place in a clip so my screen shots are consistent. Markers are not needed in any way for titles.

Um, yeah. So, some titles look more professional than others… You can delete this title now.

So, we:

Add titles using keyboard shortcuts
Drag titles from the Title Browser
Change position by dragging the title
Change duration by dragging the edge of the clip
Delete a title by selecting it and pressing the Delete key

CHANGING TEXT

Add a new full-screen title (type Control+T) to the Timeline. To change the text in a title, double-click it in the Viewer. Here, I’ve changed my title to “An Undersea Adventure.”

NOTE: We can also change the text using the Inspector. I’ll show you how in a few paragraphs. Pick whichever method is easiest for you.

All text, in any title, can be changed by double-clicking it in the Viewer to select it, then typing the new text you want to use.

FORMATTING TEXT

You can format any text that you can select. This means that you can format entire phrases, words, or individual letters differently. For this article, I will format everything the same, because once you know how this works, you can experiment on your own.

Here, I selected my entire title and opened the Inspector (shortcut Cmd+4). Click the Text tab at the top. This section of the Inspector allows you to format the text.

NOTE: The text box near the top of the panel is the second place you can select text for formatting.

If you want a fast way to format text, click the word “Normal” at the top. This displays a menu filled with different text formats. Some of these formats look pretty dreadful; the rest look worse.

NOTE: You can create your own text styles. Refer to the Help for information on how.

The Basic section of the Inspector allows you to change fonts, size, alignment… all the standard font settings we see in other programs. Here, I’ve changed the font to Hobo Std, at 167 points.

While many of these settings you already know there are a few you may not:

Line spacing. Adjusts the vertical distance between lines within the same paragraph.
Tracking. Adjusts the horizontal spacing between letters.
Baseline. Adjusts the vertical spacing of text compared to the horizontal line running thru the center of the white circle in the Viewer.

The Face section allows us to change font color, opacity and blue. Outline and Glow allows us to add, not surprisingly, outlines and glows. You can adjust these as you see fit - I tend not to add outlines or glows.

However, I STRONGLY recommend adding drop shadows to all text that you want viewers to read. Video, even HD video, is low resolution compared to print. Drop shadows make your text much easier to read. These are the settings I recommend for drop shadows.

After making a few changes in the Inspector, here’s the final result. Very cool - and very different from where we started!

ACTION SAFE/TITLE SAFE ZONES

Since television was first invented, we needed to compensate for the differences in TV sets by designing graphics to stay within Action Safe and Title Safe boundaries.

While much of today’s video is designed for the web, your titles will look the best if you follow the same guidelines.

Titles015

Go to the Switch in the Viewer and select “Show Action Safe/Title Safe Zones.”

This displays two pale rectangles in the frame. The outer rectangle is called “Action Safe,” the inner one is called “Title Safe.” Action Safe is 5% in from all edges; Title Safe is 10% in from all edges.

When designing text and graphics for the web, keep all essential elements inside the outer rectangle. When designing graphics and text for broadcast or cable, keep all essential elements inside the inner rectangle.

Here, for example, notice that my title is fully contained within Action Safe.

SUMMARY

Titles give our programs character and personality, plus they explain what’s going on to the audience. Final Cut Pro X provides a wealth of formatting options to make our text look great.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Final Cut Pro X has almost 200 different text effects that we can add, but the process of adding titles is essentially the same. Adding titles is what this article is about.

DEFINITIONS

Just to keep us all on the same page, here are my definitions of key terms related to text:

Text or titles. Words placed on the screen. I use these terms interchangeably.
Superimpose. Text displayed on the the screen with other video below it. These are also called “supers” or “keys.”
Full-screen. Text which occupies the entire screen.
Lower-third. Text which fits below a person talking; in the “lower-third” of the screen.
Info-graphics. Full-screen text which is superimposed on a graphic, generally used to convey technical information. Typical uses are sports statistics or other information which is easier to convey using text than having someone read the words.

JUST THE BASICS

I’d like to introduce “Yertle,” he’s a sea turtle and the star of this article. (Footage courtesy of Jim Walker and Lobsters Gone Wild Productions.)

At its simplest, we use titles to display his (its?) name.

Look at the Browser and see the results of your work. A lower-third title is superimposed over the video in the lower left corner. (I’ll talk about formatting the text in a few paragraphs.)

NOTE: The big limitation of this lower-third title is that it can only be positioned in the left corner. Moving it to the center or right corner requires manual adjustment.

You position or trim a title the same as any video clip: drag the clip to a different location, or drag an edge to change its duration.

Select that title and delete it by pressing the Delete key.

This time, type Control+T and the default full-screen title appears in the center of the screen. Again, this has a default duration of 10 seconds.

Select and delete that full-screen title.

There’s one more way to apply a title: dragging from the Titles Browser.

Let’s add a totally ridiculous title to our turtle - drag Clouds from the Title Browser and place it above the clip at the point where you want a title to appear.

NOTE: I’m using a marker in the Timeline to help me find the same place in a clip so my screen shots are consistent. Markers are not needed in any way for titles.

Um, yeah. So, some titles look more professional than others… You can delete this title now.

So, we:

Add titles using keyboard shortcuts
Drag titles from the Title Browser
Change position by dragging the title
Change duration by dragging the edge of the clip
Delete a title by selecting it and pressing the Delete key

CHANGING TEXT

Add a new full-screen title (type Control+T) to the Timeline. To change the text in a title, double-click it in the Viewer. Here, I’ve changed my title to “An Undersea Adventure.”

NOTE: We can also change the text using the Inspector. I’ll show you how in a few paragraphs. Pick whichever method is easiest for you.

All text, in any title, can be changed by double-clicking it in the Viewer to select it, then typing the new text you want to use.

FORMATTING TEXT

Here, I selected my entire title and opened the Inspector (shortcut Cmd+4). Click the Text tab at the top. This section of the Inspector allows you to format the text.

NOTE: The text box near the top of the panel is the second place you can select text for formatting.

NOTE: You can create your own text styles. Refer to the Help for information on how.

The Basic section of the Inspector allows you to change fonts, size, alignment… all the standard font settings we see in other programs. Here, I’ve changed the font to Hobo Std, at 167 points.

While many of these settings you already know there are a few you may not:

Line spacing. Adjusts the vertical distance between lines within the same paragraph.
Tracking. Adjusts the horizontal spacing between letters.
Baseline. Adjusts the vertical spacing of text compared to the horizontal line running thru the center of the white circle in the Viewer.

After making a few changes in the Inspector, here’s the final result. Very cool - and very different from where we started!

ACTION SAFE/TITLE SAFE ZONES

Since television was first invented, we needed to compensate for the differences in TV sets by designing graphics to stay within Action Safe and Title Safe boundaries.

While much of today’s video is designed for the web, your titles will look the best if you follow the same guidelines.

Titles015

Go to the Switch in the Viewer and select “Show Action Safe/Title Safe Zones.”

Here, for example, notice that my title is fully contained within Action Safe.

SUMMARY

Titles give our programs character and personality, plus they explain what’s going on to the audience. Final Cut Pro X provides a wealth of formatting options to make our text look great.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Final Cut Pro X has almost 200 different text effects that we can add, but the process of adding titles is essentially the same. Adding titles is what this article is about.

DEFINITIONS

Just to keep us all on the same page, here are my definitions of key terms related to text:

Text or titles. Words placed on the screen. I use these terms interchangeably.
Superimpose. Text displayed on the the screen with other video below it. These are also called “supers” or “keys.”
Full-screen. Text which occupies the entire screen.
Lower-third. Text which fits below a person talking; in the “lower-third” of the screen.
Info-graphics. Full-screen text which is superimposed on a graphic, generally used to convey technical information. Typical uses are sports statistics or other information which is easier to convey using text than having someone read the words.

JUST THE BASICS

I’d like to introduce “Yertle,” he’s a sea turtle and the star of this article. (Footage courtesy of Jim Walker and Lobsters Gone Wild Productions.)

At its simplest, we use titles to display his (its?) name.

Look at the Browser and see the results of your work. A lower-third title is superimposed over the video in the lower left corner. (I’ll talk about formatting the text in a few paragraphs.)

NOTE: The big limitation of this lower-third title is that it can only be positioned in the left corner. Moving it to the center or right corner requires manual adjustment.

You position or trim a title the same as any video clip: drag the clip to a different location, or drag an edge to change its duration.

Select that title and delete it by pressing the Delete key.

This time, type Control+T and the default full-screen title appears in the center of the screen. Again, this has a default duration of 10 seconds.

Select and delete that full-screen title.

There’s one more way to apply a title: dragging from the Titles Browser.

Let’s add a totally ridiculous title to our turtle - drag Clouds from the Title Browser and place it above the clip at the point where you want a title to appear.

NOTE: I’m using a marker in the Timeline to help me find the same place in a clip so my screen shots are consistent. Markers are not needed in any way for titles.

Um, yeah. So, some titles look more professional than others… You can delete this title now.

So, we:

Add titles using keyboard shortcuts
Drag titles from the Title Browser
Change position by dragging the title
Change duration by dragging the edge of the clip
Delete a title by selecting it and pressing the Delete key

CHANGING TEXT

Add a new full-screen title (type Control+T) to the Timeline. To change the text in a title, double-click it in the Viewer. Here, I’ve changed my title to “An Undersea Adventure.”

NOTE: We can also change the text using the Inspector. I’ll show you how in a few paragraphs. Pick whichever method is easiest for you.

All text, in any title, can be changed by double-clicking it in the Viewer to select it, then typing the new text you want to use.

FORMATTING TEXT

Here, I selected my entire title and opened the Inspector (shortcut Cmd+4). Click the Text tab at the top. This section of the Inspector allows you to format the text.

NOTE: The text box near the top of the panel is the second place you can select text for formatting.

NOTE: You can create your own text styles. Refer to the Help for information on how.

The Basic section of the Inspector allows you to change fonts, size, alignment… all the standard font settings we see in other programs. Here, I’ve changed the font to Hobo Std, at 167 points.

While many of these settings you already know there are a few you may not:

Line spacing. Adjusts the vertical distance between lines within the same paragraph.
Tracking. Adjusts the horizontal spacing between letters.
Baseline. Adjusts the vertical spacing of text compared to the horizontal line running thru the center of the white circle in the Viewer.

After making a few changes in the Inspector, here’s the final result. Very cool - and very different from where we started!

ACTION SAFE/TITLE SAFE ZONES

Since television was first invented, we needed to compensate for the differences in TV sets by designing graphics to stay within Action Safe and Title Safe boundaries.

While much of today’s video is designed for the web, your titles will look the best if you follow the same guidelines.

Titles015

Go to the Switch in the Viewer and select “Show Action Safe/Title Safe Zones.”

Here, for example, notice that my title is fully contained within Action Safe.

SUMMARY

Titles give our programs character and personality, plus they explain what’s going on to the audience. Final Cut Pro X provides a wealth of formatting options to make our text look great.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Final Cut Pro X has almost 200 different text effects that we can add, but the process of adding titles is essentially the same. Adding titles is what this article is about.

DEFINITIONS

Just to keep us all on the same page, here are my definitions of key terms related to text:

Text or titles. Words placed on the screen. I use these terms interchangeably.
Superimpose. Text displayed on the the screen with other video below it. These are also called “supers” or “keys.”
Full-screen. Text which occupies the entire screen.
Lower-third. Text which fits below a person talking; in the “lower-third” of the screen.
Info-graphics. Full-screen text which is superimposed on a graphic, generally used to convey technical information. Typical uses are sports statistics or other information which is easier to convey using text than having someone read the words.

JUST THE BASICS

I’d like to introduce “Yertle,” he’s a sea turtle and the star of this article. (Footage courtesy of Jim Walker and Lobsters Gone Wild Productions.)

At its simplest, we use titles to display his (its?) name.

Look at the Browser and see the results of your work. A lower-third title is superimposed over the video in the lower left corner. (I’ll talk about formatting the text in a few paragraphs.)

NOTE: The big limitation of this lower-third title is that it can only be positioned in the left corner. Moving it to the center or right corner requires manual adjustment.

You position or trim a title the same as any video clip: drag the clip to a different location, or drag an edge to change its duration.

Select that title and delete it by pressing the Delete key.

This time, type Control+T and the default full-screen title appears in the center of the screen. Again, this has a default duration of 10 seconds.

Select and delete that full-screen title.

There’s one more way to apply a title: dragging from the Titles Browser.

Let’s add a totally ridiculous title to our turtle - drag Clouds from the Title Browser and place it above the clip at the point where you want a title to appear.

NOTE: I’m using a marker in the Timeline to help me find the same place in a clip so my screen shots are consistent. Markers are not needed in any way for titles.

Um, yeah. So, some titles look more professional than others… You can delete this title now.

So, we:

Add titles using keyboard shortcuts
Drag titles from the Title Browser
Change position by dragging the title
Change duration by dragging the edge of the clip
Delete a title by selecting it and pressing the Delete key

CHANGING TEXT

Add a new full-screen title (type Control+T) to the Timeline. To change the text in a title, double-click it in the Viewer. Here, I’ve changed my title to “An Undersea Adventure.”

NOTE: We can also change the text using the Inspector. I’ll show you how in a few paragraphs. Pick whichever method is easiest for you.

All text, in any title, can be changed by double-clicking it in the Viewer to select it, then typing the new text you want to use.

FORMATTING TEXT

Here, I selected my entire title and opened the Inspector (shortcut Cmd+4). Click the Text tab at the top. This section of the Inspector allows you to format the text.

NOTE: The text box near the top of the panel is the second place you can select text for formatting.

NOTE: You can create your own text styles. Refer to the Help for information on how.

The Basic section of the Inspector allows you to change fonts, size, alignment… all the standard font settings we see in other programs. Here, I’ve changed the font to Hobo Std, at 167 points.

While many of these settings you already know there are a few you may not:

Line spacing. Adjusts the vertical distance between lines within the same paragraph.
Tracking. Adjusts the horizontal spacing between letters.
Baseline. Adjusts the vertical spacing of text compared to the horizontal line running thru the center of the white circle in the Viewer.

After making a few changes in the Inspector, here’s the final result. Very cool - and very different from where we started!

ACTION SAFE/TITLE SAFE ZONES

Since television was first invented, we needed to compensate for the differences in TV sets by designing graphics to stay within Action Safe and Title Safe boundaries.

While much of today’s video is designed for the web, your titles will look the best if you follow the same guidelines.

Titles015

Go to the Switch in the Viewer and select “Show Action Safe/Title Safe Zones.”

Here, for example, notice that my title is fully contained within Action Safe.

SUMMARY

Titles give our programs character and personality, plus they explain what’s going on to the audience. Final Cut Pro X provides a wealth of formatting options to make our text look great.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Ai Driven Video Production

Flip Video Clips in Final Cut Pro A 4-Step Guide for Beginners

Flip Video Clips in Final Cut Pro: A 4-Step Guide for Beginners

4 Detailed Steps to Flip a Clip in Final Cut Pro

Benjamin Arango

How to Flip a Clip in Final Cut Pro

Step 1: Select a Clip on the Timeline

Step 2: Access the Transform Option

Step 3: Rotate and Re-size Video Clips

Step 4: Flipping video clips

An Easier Way to Flip a Clip in Final Cut Pro Alternative

Benjamin Arango

How to Flip a Clip in Final Cut Pro

Step 1: Select a Clip on the Timeline

Step 2: Access the Transform Option

Step 3: Rotate and Re-size Video Clips

Step 4: Flipping video clips

An Easier Way to Flip a Clip in Final Cut Pro Alternative

Benjamin Arango

How to Flip a Clip in Final Cut Pro

Step 1: Select a Clip on the Timeline

Step 2: Access the Transform Option

Step 3: Rotate and Re-size Video Clips

Step 4: Flipping video clips

An Easier Way to Flip a Clip in Final Cut Pro Alternative

Benjamin Arango

How to Flip a Clip in Final Cut Pro

Step 1: Select a Clip on the Timeline

Step 2: Access the Transform Option

Step 3: Rotate and Re-size Video Clips

Step 4: Flipping video clips

An Easier Way to Flip a Clip in Final Cut Pro Alternative

Resize with Ease: A Picture Ratio Calculation Tool

How Do You Find the Picture Ratio Calculator?

In this article

Part 1 What is Picture Size Ratio?

Part 2 What is 1920x1080 in Ratio?

Part 3 How Do You Find the Ratio of an Image?

Part 4 1920x1080 Aspect Ratio and 16:9 Aspect Ratio Differences

Part 5 The Resolution Calculator (Image Ratio Calculator)

Part 6 A Practical Explanation about Aspect Ratios in Filmora

Wondershare Filmora

Key Takeaways from This Episode

In this article

Part 1 What is Picture Size Ratio?

Part 2 What is 1920x1080 in Ratio?

Part 3 How Do You Find the Ratio of an Image?

Part 4 1920x1080 Aspect Ratio and 16:9 Aspect Ratio Differences

Part 5 The Resolution Calculator (Image Ratio Calculator)

Part 6 A Practical Explanation about Aspect Ratios in Filmora

Wondershare Filmora

Key Takeaways from This Episode

In this article

Part 1 What is Picture Size Ratio?

Part 2 What is 1920x1080 in Ratio?

Part 3 How Do You Find the Ratio of an Image?

Part 4 1920x1080 Aspect Ratio and 16:9 Aspect Ratio Differences

Part 5 The Resolution Calculator (Image Ratio Calculator)

Part 6 A Practical Explanation about Aspect Ratios in Filmora

Wondershare Filmora

Key Takeaways from This Episode

In this article

Part 1 What is Picture Size Ratio?

Part 2 What is 1920x1080 in Ratio?

Part 3 How Do You Find the Ratio of an Image?

Part 4 1920x1080 Aspect Ratio and 16:9 Aspect Ratio Differences

Part 5 The Resolution Calculator (Image Ratio Calculator)

Part 6 A Practical Explanation about Aspect Ratios in Filmora

Wondershare Filmora

Key Takeaways from This Episode

The Capabilities of Final Cut Pro Have Evolved Significantly and Here We List Top 10 Famous Movies Made by Final Cut Pro

Top 10 Famous Movies Made By Final Cut Pro

Benjamin Arango

Top 10 Movies Made by Final Cut Pro

Benjamin Arango

Top 10 Movies Made by Final Cut Pro

Benjamin Arango

Top 10 Movies Made by Final Cut Pro

Benjamin Arango

Top 10 Movies Made by Final Cut Pro