Kapwing Slow Motion Tutorial: A Beginner’s Guide to Slowing Down Your Videos

Change Video Speed Easily

Wondershare Filmora is one of the most popular video editing software among YouTubers , you can use it to speed up and slow down videos with Speed Ramping or Uniform Speed tools.

Try It Free Try It Free

Kapwing is a web-based video editor that enables you to perform post-production actions on the clips that you upload. In addition, the web app has a timeline at the bottom of the interface that uses the layer-oriented approach to give you an industry-standard ambiance while editing.

With Kapwing, you can even create basic to advanced clips by starting a new project from the scratch. Some of the tasks that Kapwing can do quite efficiently include:

• Adding text and titles to the videos
• Reversing the playback
• Inserting royalty-free video clips and images from its built-in media library
• Recording computer screen
• Recording webcam footage
• Adding audio, etc.

With that said, here you will learn how to slow down the playback speed of a video with Kapwing to give the clip a cinematic effect.

In this article

01 How to Make a Slow Motion Video on Kapwing? [Step by Step]

02 FAQs About Kapwing Online Video Editor

02 Use Kapwing Alternative to Make Slow Motion Video

Part 1: How to Make a Slow Motion Video on Kapwing? [Step by Step]

Note: Before proceeding further, it is imperative to understand that Kapwing adds a watermark to the videos while exporting as long as you are not signed in. This limitation can be removed by signing in using your Google or Facebook ID, or with a different email address provided by some other service provider.

To make a slow-motion video with Kapwing, you must follow the step-by-step instructions that are given below:

Step 1: Sign In and Upload the Source Video to Kapwing

Launch your favorite browser (Google Chrome is used here), go to https://www.kapwing.com/ , and click Sign In from the top-right corner of the web page. Next, use your preferred platform, i.e., Google or Facebook, or use a different email address to sign in. On the next page, click Create New Project.

When the main interface opens up, click Click to upload from the right section, and select and upload the source video that you want to slow down. Alternatively, you can either paste the URL of a published video in the available field, or upload one from your Google Drive or Google Photos storage by clicking their corresponding icons below the Click to upload button.

Step 2: Slow Down the Playback Speed

Ensure that the uploaded video is successfully added to the Timeline at the bottom, click to select the clip if not already selected, confirm that the EDIT tab is selected from the top of the right pane, and use the – and + buttons under the SPEED section to decrease and increase the playback speed of the footage respectively.

To make a slow motion with Kapwing, you can click the – icon and choose 0.25X, 0.5X and 0.75X slower based on your need. You can see the changes in the timeline when you apply the speed presets.

Note: You can slow down or increase the speed to as low as 0.25x or as high as 4x respectively.

Step 3: Add Additional Decorations (Optional)

Use the tools available in the toolbox on the left to add other elements like text, stock video clips, images, audio, etc. to make the footage look more professional and appealing.

Step 4: Export and Download the Video

Once everything is done, click the Play button above the Timeline to preview the clip, and once found acceptable, click Export Video from the top-right area to export the footage.

On the next page, click Download from the right to download the slow-motion video to your local hard drive. Alternatively, you can also click the down icon that is present next to the Export Video button, and choose your preferred format from the menu to export the video.

Note: Kapwing makes the produced videos available for public viewing while using a free account. This privacy vulnerability can be removed by subscribing to a paid plan offered by the web tool. And for free account, your video is limited to 250MB uploading, and 30 minutes long exporting.

There are some other options to slow videos online for free, check our picks of best free online slow motion video editors.

Part 2: FAQs About Kapwing Online Video Editor

1. Is Kapwing really free?

Yes, it is free, and there will be no watermark on videos under 5 minutes. However, upon exporting, the videos remain available for the public which could be a breach of privacy for some users. This limitation can be removed by subscribing to the web tool’s paid membership. You can choose either a $192 per year or $24 per month plan for the subscription.

2. What is the limitation of using the Kapwing free plan?

When you use Kapwing with the free plan:

• All the videos that you produce remain available for the public viewing;
• The video files that you upload cannot exceed 250MB in size;
• Export 3 hours of video per month, and each video is limited to 30 minutes long;
• The resolution of the videos is restricted to 720p only, etc.

3. How slow can I make it with Kapwing?

You can slow down the playback speed to 0.25x with Kapwing. When increasing the speed, it can go up to 4x.

Conclusion

Kapwing is an efficient online video editor. The best part is, the tool doesn’t add a watermark to the videos even if you are using its free plan. However, certain restrictions like file size limit, resolution threshold, etc. are imposed on you if you are a non-paid user. To get rid of all such barriers, you must subscribe to a monthly or annual plan that is $24 or $192 respectively.

Try It Free Try It Free

Kapwing is a web-based video editor that enables you to perform post-production actions on the clips that you upload. In addition, the web app has a timeline at the bottom of the interface that uses the layer-oriented approach to give you an industry-standard ambiance while editing.

With Kapwing, you can even create basic to advanced clips by starting a new project from the scratch. Some of the tasks that Kapwing can do quite efficiently include:

• Adding text and titles to the videos
• Reversing the playback
• Inserting royalty-free video clips and images from its built-in media library
• Recording computer screen
• Recording webcam footage
• Adding audio, etc.

With that said, here you will learn how to slow down the playback speed of a video with Kapwing to give the clip a cinematic effect.

In this article

01 How to Make a Slow Motion Video on Kapwing? [Step by Step]

02 FAQs About Kapwing Online Video Editor

02 Use Kapwing Alternative to Make Slow Motion Video

Part 1: How to Make a Slow Motion Video on Kapwing? [Step by Step]

Note: Before proceeding further, it is imperative to understand that Kapwing adds a watermark to the videos while exporting as long as you are not signed in. This limitation can be removed by signing in using your Google or Facebook ID, or with a different email address provided by some other service provider.

To make a slow-motion video with Kapwing, you must follow the step-by-step instructions that are given below:

Step 1: Sign In and Upload the Source Video to Kapwing

Launch your favorite browser (Google Chrome is used here), go to https://www.kapwing.com/ , and click Sign In from the top-right corner of the web page. Next, use your preferred platform, i.e., Google or Facebook, or use a different email address to sign in. On the next page, click Create New Project.

When the main interface opens up, click Click to upload from the right section, and select and upload the source video that you want to slow down. Alternatively, you can either paste the URL of a published video in the available field, or upload one from your Google Drive or Google Photos storage by clicking their corresponding icons below the Click to upload button.

Step 2: Slow Down the Playback Speed

Ensure that the uploaded video is successfully added to the Timeline at the bottom, click to select the clip if not already selected, confirm that the EDIT tab is selected from the top of the right pane, and use the – and + buttons under the SPEED section to decrease and increase the playback speed of the footage respectively.

To make a slow motion with Kapwing, you can click the – icon and choose 0.25X, 0.5X and 0.75X slower based on your need. You can see the changes in the timeline when you apply the speed presets.

Note: You can slow down or increase the speed to as low as 0.25x or as high as 4x respectively.

Step 3: Add Additional Decorations (Optional)

Use the tools available in the toolbox on the left to add other elements like text, stock video clips, images, audio, etc. to make the footage look more professional and appealing.

Step 4: Export and Download the Video

Once everything is done, click the Play button above the Timeline to preview the clip, and once found acceptable, click Export Video from the top-right area to export the footage.

On the next page, click Download from the right to download the slow-motion video to your local hard drive. Alternatively, you can also click the down icon that is present next to the Export Video button, and choose your preferred format from the menu to export the video.

Note: Kapwing makes the produced videos available for public viewing while using a free account. This privacy vulnerability can be removed by subscribing to a paid plan offered by the web tool. And for free account, your video is limited to 250MB uploading, and 30 minutes long exporting.

There are some other options to slow videos online for free, check our picks of best free online slow motion video editors.

Part 2: FAQs About Kapwing Online Video Editor

1. Is Kapwing really free?

Yes, it is free, and there will be no watermark on videos under 5 minutes. However, upon exporting, the videos remain available for the public which could be a breach of privacy for some users. This limitation can be removed by subscribing to the web tool’s paid membership. You can choose either a $192 per year or $24 per month plan for the subscription.

2. What is the limitation of using the Kapwing free plan?

When you use Kapwing with the free plan:

• All the videos that you produce remain available for the public viewing;
• The video files that you upload cannot exceed 250MB in size;
• Export 3 hours of video per month, and each video is limited to 30 minutes long;
• The resolution of the videos is restricted to 720p only, etc.

3. How slow can I make it with Kapwing?

You can slow down the playback speed to 0.25x with Kapwing. When increasing the speed, it can go up to 4x.

Conclusion

Kapwing is an efficient online video editor. The best part is, the tool doesn’t add a watermark to the videos even if you are using its free plan. However, certain restrictions like file size limit, resolution threshold, etc. are imposed on you if you are a non-paid user. To get rid of all such barriers, you must subscribe to a monthly or annual plan that is $24 or $192 respectively.

Try It Free Try It Free

Kapwing is a web-based video editor that enables you to perform post-production actions on the clips that you upload. In addition, the web app has a timeline at the bottom of the interface that uses the layer-oriented approach to give you an industry-standard ambiance while editing.

With Kapwing, you can even create basic to advanced clips by starting a new project from the scratch. Some of the tasks that Kapwing can do quite efficiently include:

• Adding text and titles to the videos
• Reversing the playback
• Inserting royalty-free video clips and images from its built-in media library
• Recording computer screen
• Recording webcam footage
• Adding audio, etc.

With that said, here you will learn how to slow down the playback speed of a video with Kapwing to give the clip a cinematic effect.

In this article

01 How to Make a Slow Motion Video on Kapwing? [Step by Step]

02 FAQs About Kapwing Online Video Editor

02 Use Kapwing Alternative to Make Slow Motion Video

Part 1: How to Make a Slow Motion Video on Kapwing? [Step by Step]

Note: Before proceeding further, it is imperative to understand that Kapwing adds a watermark to the videos while exporting as long as you are not signed in. This limitation can be removed by signing in using your Google or Facebook ID, or with a different email address provided by some other service provider.

To make a slow-motion video with Kapwing, you must follow the step-by-step instructions that are given below:

Step 1: Sign In and Upload the Source Video to Kapwing

Launch your favorite browser (Google Chrome is used here), go to https://www.kapwing.com/ , and click Sign In from the top-right corner of the web page. Next, use your preferred platform, i.e., Google or Facebook, or use a different email address to sign in. On the next page, click Create New Project.

When the main interface opens up, click Click to upload from the right section, and select and upload the source video that you want to slow down. Alternatively, you can either paste the URL of a published video in the available field, or upload one from your Google Drive or Google Photos storage by clicking their corresponding icons below the Click to upload button.

Step 2: Slow Down the Playback Speed

Ensure that the uploaded video is successfully added to the Timeline at the bottom, click to select the clip if not already selected, confirm that the EDIT tab is selected from the top of the right pane, and use the – and + buttons under the SPEED section to decrease and increase the playback speed of the footage respectively.

To make a slow motion with Kapwing, you can click the – icon and choose 0.25X, 0.5X and 0.75X slower based on your need. You can see the changes in the timeline when you apply the speed presets.

Note: You can slow down or increase the speed to as low as 0.25x or as high as 4x respectively.

Step 3: Add Additional Decorations (Optional)

Use the tools available in the toolbox on the left to add other elements like text, stock video clips, images, audio, etc. to make the footage look more professional and appealing.

Step 4: Export and Download the Video

Once everything is done, click the Play button above the Timeline to preview the clip, and once found acceptable, click Export Video from the top-right area to export the footage.

On the next page, click Download from the right to download the slow-motion video to your local hard drive. Alternatively, you can also click the down icon that is present next to the Export Video button, and choose your preferred format from the menu to export the video.

Note: Kapwing makes the produced videos available for public viewing while using a free account. This privacy vulnerability can be removed by subscribing to a paid plan offered by the web tool. And for free account, your video is limited to 250MB uploading, and 30 minutes long exporting.

There are some other options to slow videos online for free, check our picks of best free online slow motion video editors.

Part 2: FAQs About Kapwing Online Video Editor

1. Is Kapwing really free?

Yes, it is free, and there will be no watermark on videos under 5 minutes. However, upon exporting, the videos remain available for the public which could be a breach of privacy for some users. This limitation can be removed by subscribing to the web tool’s paid membership. You can choose either a $192 per year or $24 per month plan for the subscription.

2. What is the limitation of using the Kapwing free plan?

When you use Kapwing with the free plan:

• All the videos that you produce remain available for the public viewing;
• The video files that you upload cannot exceed 250MB in size;
• Export 3 hours of video per month, and each video is limited to 30 minutes long;
• The resolution of the videos is restricted to 720p only, etc.

3. How slow can I make it with Kapwing?

You can slow down the playback speed to 0.25x with Kapwing. When increasing the speed, it can go up to 4x.

Conclusion

Kapwing is an efficient online video editor. The best part is, the tool doesn’t add a watermark to the videos even if you are using its free plan. However, certain restrictions like file size limit, resolution threshold, etc. are imposed on you if you are a non-paid user. To get rid of all such barriers, you must subscribe to a monthly or annual plan that is $24 or $192 respectively.

Try It Free Try It Free

Kapwing is a web-based video editor that enables you to perform post-production actions on the clips that you upload. In addition, the web app has a timeline at the bottom of the interface that uses the layer-oriented approach to give you an industry-standard ambiance while editing.

With Kapwing, you can even create basic to advanced clips by starting a new project from the scratch. Some of the tasks that Kapwing can do quite efficiently include:

• Adding text and titles to the videos
• Reversing the playback
• Inserting royalty-free video clips and images from its built-in media library
• Recording computer screen
• Recording webcam footage
• Adding audio, etc.

With that said, here you will learn how to slow down the playback speed of a video with Kapwing to give the clip a cinematic effect.

In this article

01 How to Make a Slow Motion Video on Kapwing? [Step by Step]

02 FAQs About Kapwing Online Video Editor

02 Use Kapwing Alternative to Make Slow Motion Video

Part 1: How to Make a Slow Motion Video on Kapwing? [Step by Step]

Note: Before proceeding further, it is imperative to understand that Kapwing adds a watermark to the videos while exporting as long as you are not signed in. This limitation can be removed by signing in using your Google or Facebook ID, or with a different email address provided by some other service provider.

To make a slow-motion video with Kapwing, you must follow the step-by-step instructions that are given below:

Step 1: Sign In and Upload the Source Video to Kapwing

Launch your favorite browser (Google Chrome is used here), go to https://www.kapwing.com/ , and click Sign In from the top-right corner of the web page. Next, use your preferred platform, i.e., Google or Facebook, or use a different email address to sign in. On the next page, click Create New Project.

When the main interface opens up, click Click to upload from the right section, and select and upload the source video that you want to slow down. Alternatively, you can either paste the URL of a published video in the available field, or upload one from your Google Drive or Google Photos storage by clicking their corresponding icons below the Click to upload button.

Step 2: Slow Down the Playback Speed

Ensure that the uploaded video is successfully added to the Timeline at the bottom, click to select the clip if not already selected, confirm that the EDIT tab is selected from the top of the right pane, and use the – and + buttons under the SPEED section to decrease and increase the playback speed of the footage respectively.

To make a slow motion with Kapwing, you can click the – icon and choose 0.25X, 0.5X and 0.75X slower based on your need. You can see the changes in the timeline when you apply the speed presets.

Note: You can slow down or increase the speed to as low as 0.25x or as high as 4x respectively.

Step 3: Add Additional Decorations (Optional)

Use the tools available in the toolbox on the left to add other elements like text, stock video clips, images, audio, etc. to make the footage look more professional and appealing.

Step 4: Export and Download the Video

Once everything is done, click the Play button above the Timeline to preview the clip, and once found acceptable, click Export Video from the top-right area to export the footage.

On the next page, click Download from the right to download the slow-motion video to your local hard drive. Alternatively, you can also click the down icon that is present next to the Export Video button, and choose your preferred format from the menu to export the video.

Note: Kapwing makes the produced videos available for public viewing while using a free account. This privacy vulnerability can be removed by subscribing to a paid plan offered by the web tool. And for free account, your video is limited to 250MB uploading, and 30 minutes long exporting.

There are some other options to slow videos online for free, check our picks of best free online slow motion video editors.

Part 2: FAQs About Kapwing Online Video Editor

1. Is Kapwing really free?

Yes, it is free, and there will be no watermark on videos under 5 minutes. However, upon exporting, the videos remain available for the public which could be a breach of privacy for some users. This limitation can be removed by subscribing to the web tool’s paid membership. You can choose either a $192 per year or $24 per month plan for the subscription.

2. What is the limitation of using the Kapwing free plan?

When you use Kapwing with the free plan:

• All the videos that you produce remain available for the public viewing;
• The video files that you upload cannot exceed 250MB in size;
• Export 3 hours of video per month, and each video is limited to 30 minutes long;
• The resolution of the videos is restricted to 720p only, etc.

3. How slow can I make it with Kapwing?

You can slow down the playback speed to 0.25x with Kapwing. When increasing the speed, it can go up to 4x.

Conclusion

Kapwing is an efficient online video editor. The best part is, the tool doesn’t add a watermark to the videos even if you are using its free plan. However, certain restrictions like file size limit, resolution threshold, etc. are imposed on you if you are a non-paid user. To get rid of all such barriers, you must subscribe to a monthly or annual plan that is $24 or $192 respectively.

Get Ready to Create: 10 Must-Try Online Waveform Generators

You might have seen waves moving up and down in song lyrics, karaoke videos, podcasts, and other videos. Well, that’s what is known as waveform, in other words, audiogram. So, if you want to add an audio waveform to your videos, all you need is an audio waveform generator that will let you create fascinating animated waveforms for your videos.

The good news is that there are multiple audio waveform video generators to choose from. However, knowing that you will want only the best online waveform generator, we have hand-picked ten such online sound wave generators that will let you add animated waveform effortlessly.

In this article

01 Part 1: What is a Waveform Generator?

02 Part 2: Best Online Waveform Generators You Should Try!

03 Part 3: Why Should You Use Audio Visualization?

Part 1: What is a Waveform Generator?

Now, to create a waveform to audio and add it to a video, you need an audio waveform generator. So, what’s a waveform generator? It’s a tool that will let you design an attractive waveform to any audio and add it to a video. You can look for soundwave generators online since they are a plethora of them.

Please note that some sound wave generators are available online for free, while for others, you will have to pay a small fee. Waveforms can be both low and high. It’s just that the higher waveforms will signify the louder sounds, and the lower waveforms will signify lower sounds. What’s more? Waveforms look really cool and can enhance the video quality!

Part 2: Best Online Waveform Generators You Should Try

#1 VEED.IO

Price: Free

If you want to create waveform video from audio for free, the first waveform generator that you should try is VEED.IO. This fantastic waveform generator adds animated waveforms to videos. And it is free to use. The supported formats are MKV, M4A, M4V, MOV, MP4, MPEG, OPUS, MPG4, and more! In addition, VEED.IO can convert videos to the same supported formats.

To talk about its features, it’s a free online waveform generator. It allows you to be creative and lets you customize your sound wave just the way you want. You can place the waveform anywhere on the video; it enables you to edit your videos, such as adding text, audio, images, etc.

To use VEED.IO, you will first have to visit the official website and upload your video by clicking on the Choose Videos option. Once done, generate the waveform by clicking on the Elements option. Finally, click on the Export option, and that’s it!

#2 Kapwing

Price: Free plan | Upgrade: $24.00 per month.

Next up is Kapwing. It’s a simple-to-use multimedia editor that allows you to generate waveforms. This tool supports FLAC, MP3, and other popular video formats. It can export in MP4, AVI, FLV, 3GP, and other popular video formats. You can customize the waveform, frame your canvas, add custom text, enhance the video quality, etc.

To start using Kapwing, you will have to upload the video you want to edit. Then, you will have to add a waveform. After that, you can position the waveform as you like. You can change the speed, style, and color of the waveform later. Finally, once the waveform is ready, you can click on the download option.

The best part about Kapwing is that it lets you control the waveform as you like. Moreover, once the waveform is completed, you can share it with anyone you want.

#4 WaveVisual

Price: Free

WaveVisual is a free waveform generator and is an online tool. This means that you will not have to download WaveVisual on your computer. It lets you upload files directly from Spotify as well. It supports WAV, MP3, and many other formats.

There are three easy steps to follow. You need to upload an audio file, else copy the Spotify song link and paste it here on WaveVisual. Then, customize the design to create your unique waveform. Finally, click on the download option. You can even add a background image to make your waveform look extraordinary.

#5 Audiogram

Price Free | Registration required

The next online waveform generator is Audiogram. It not only lets you add waveform to your audios, but you can use the same tool to create editable transcripts as well. This tool is an ideal option for music videos and podcasts. The tool provides you with a fantastic library that consists of multiple templates. It supports MP3, WAV, etc.

The good thing about Audiogram is that it lets you customize the waveform to suit your needs and wants. To use it, please visit getaudiogram.com. Then, upload your audio, choose a design for your waveform, and once done, download, export, and share it!

#6 EchoWave.io

Price: Free

EchoWave.io lets you add different styles of waveforms, such as bar, radial, and line. It accepts MP3 and WAV audio formats and is free to use. EchoWave.io takes away the hard work you might have otherwise done if you didn’t have a waveform generator. You can use it to add a visual component to your lyrical songs, live streams, podcasts, images, and more.

To add a waveform, visit the official website, click on the upload option to upload the audio, choose animation style for the waveform, adjust the waveform as per your style and finally, generate the video and hit the render button to download the waveform video.

#7 RenderForest

Price: Free

RenderForest is a one-of-a-kind platform where you will find customizable waveform templates. Here, you need to choose a template and upload your audio, and RenderForest will take care of the rest. You can even add animated typography to enhance the video-watching experience. It supports all top audio formats, such as MP3, FLAC, etc.

To start using it, click on the template that you like. Then, hit the create now option. You can add a photo, music name, artist name, and more. Then, add the music file and click on the download option to save the file.

You may also like best music visualizer makers .

#8 Motionbox Music Visualizer

Price: Free | Sign up is required

Motionbox Music Visualizer is a super easy tool to use. This tool is often used by voice actors, musicians, and podcasters to add waveforms, mainly because of its easy-to-understand interface. It supports FLAC, WMA, WAV, MP3, and other formats.

To use it, visit Motionbox Music Visualizer’s official website and upload your audio. After that, trim your audio and finally add the waveform visualizer. Just three easy steps, and your video with waveform will be generated.

#9 Specterr Music Visualizer

Price: Pro: $25.00/month | Unlimited: $75.00/month | Free with a watermark

Specterr Music Visualizer provides you with built-in visualizer presets to choose from. The tool is reliable and very easy to use. After you add the waveform to your audio, you will not even have to spend time downloading it. Instead, you can share it directly to your Facebook, Twitter, YouTube, Instagram account.

To get started, you will first have to select a preset. You will see multiple presets. Then, you need to upload an audio file. It accepts MP3 or WAV. Once done, you can customize the visualizer, and finally, click on the Export option to export the video.

#10 Recast Studio

Price: Free

If you have a podcast ready and want to add waveform to it, you should try Recast Studio. It allows you to add unique animated audio waveforms, which will eventually increase conversion and boost social engagement. In addition, it is easy to use and saves your time with its visualizer presets.

To use, you will have to upload the audio. It accepts MP3. Then, you need to clip the audio. After that, browse through the template section and pick your favorite. You can then customize the video to enhance its quality, such as changing the color of the waveform, adding images, editing texts, and more. Finally, download the video.

#11 Clipchamp

Price: Free | Sign up required

Clipchamp is a free online audio visualizer that you can add audio waveforms to your videos. You will not have to spend hours manually creating waveforms. It lets you browse through its multiple templates. You can just choose one for your music videos, podcasts, etc., add the animated visualizer and get it done.

Here’s how you can use it. You need to visit the official website and upload the audio file, MP3, or WAV that you want to edit. After that, you need to apply an audio visualizer. You can add background and effects, too, if you wish. After you are all done, export your video.

Part 3: Why Should You Use Audio Visualization?

Audio entertainment has been around since time immemorial, and there’s no doubt about how big of an impact it has. However, when you add audio visualization, it enhances the listening experience by manifolds. Take podcasts, for example. They have become extremely popular.

In fact, there are currently more than 30 million podcast episodes running across the world. But when you combine audio visualization, it makes the audio even better. It becomes more engaging. Not that it sounds stand-alone can’t have an impact on the audience, but with audio visualization, it doubles itself when it comes to engagement and creating a lasting impression.

Conclusion

So, now you know about the top audio waveform video generators. You can choose one from the list we have mentioned and get started because your audios, such as lyrical music videos and podcasts, deserve the magical touch of an audio visualization. So, don’t miss out on it, and try an audio waveform generator today.

02 Part 2: Best Online Waveform Generators You Should Try!

03 Part 3: Why Should You Use Audio Visualization?

Part 1: What is a Waveform Generator?

Now, to create a waveform to audio and add it to a video, you need an audio waveform generator. So, what’s a waveform generator? It’s a tool that will let you design an attractive waveform to any audio and add it to a video. You can look for soundwave generators online since they are a plethora of them.

Please note that some sound wave generators are available online for free, while for others, you will have to pay a small fee. Waveforms can be both low and high. It’s just that the higher waveforms will signify the louder sounds, and the lower waveforms will signify lower sounds. What’s more? Waveforms look really cool and can enhance the video quality!

Part 2: Best Online Waveform Generators You Should Try

#1 VEED.IO

Price: Free

If you want to create waveform video from audio for free, the first waveform generator that you should try is VEED.IO. This fantastic waveform generator adds animated waveforms to videos. And it is free to use. The supported formats are MKV, M4A, M4V, MOV, MP4, MPEG, OPUS, MPG4, and more! In addition, VEED.IO can convert videos to the same supported formats.

To talk about its features, it’s a free online waveform generator. It allows you to be creative and lets you customize your sound wave just the way you want. You can place the waveform anywhere on the video; it enables you to edit your videos, such as adding text, audio, images, etc.

To use VEED.IO, you will first have to visit the official website and upload your video by clicking on the Choose Videos option. Once done, generate the waveform by clicking on the Elements option. Finally, click on the Export option, and that’s it!

#2 Kapwing

Price: Free plan | Upgrade: $24.00 per month.

Next up is Kapwing. It’s a simple-to-use multimedia editor that allows you to generate waveforms. This tool supports FLAC, MP3, and other popular video formats. It can export in MP4, AVI, FLV, 3GP, and other popular video formats. You can customize the waveform, frame your canvas, add custom text, enhance the video quality, etc.

To start using Kapwing, you will have to upload the video you want to edit. Then, you will have to add a waveform. After that, you can position the waveform as you like. You can change the speed, style, and color of the waveform later. Finally, once the waveform is ready, you can click on the download option.

The best part about Kapwing is that it lets you control the waveform as you like. Moreover, once the waveform is completed, you can share it with anyone you want.

#4 WaveVisual

Price: Free

WaveVisual is a free waveform generator and is an online tool. This means that you will not have to download WaveVisual on your computer. It lets you upload files directly from Spotify as well. It supports WAV, MP3, and many other formats.

There are three easy steps to follow. You need to upload an audio file, else copy the Spotify song link and paste it here on WaveVisual. Then, customize the design to create your unique waveform. Finally, click on the download option. You can even add a background image to make your waveform look extraordinary.

#5 Audiogram

Price Free | Registration required

The next online waveform generator is Audiogram. It not only lets you add waveform to your audios, but you can use the same tool to create editable transcripts as well. This tool is an ideal option for music videos and podcasts. The tool provides you with a fantastic library that consists of multiple templates. It supports MP3, WAV, etc.

The good thing about Audiogram is that it lets you customize the waveform to suit your needs and wants. To use it, please visit getaudiogram.com. Then, upload your audio, choose a design for your waveform, and once done, download, export, and share it!

#6 EchoWave.io

Price: Free

EchoWave.io lets you add different styles of waveforms, such as bar, radial, and line. It accepts MP3 and WAV audio formats and is free to use. EchoWave.io takes away the hard work you might have otherwise done if you didn’t have a waveform generator. You can use it to add a visual component to your lyrical songs, live streams, podcasts, images, and more.

To add a waveform, visit the official website, click on the upload option to upload the audio, choose animation style for the waveform, adjust the waveform as per your style and finally, generate the video and hit the render button to download the waveform video.

#7 RenderForest

Price: Free

RenderForest is a one-of-a-kind platform where you will find customizable waveform templates. Here, you need to choose a template and upload your audio, and RenderForest will take care of the rest. You can even add animated typography to enhance the video-watching experience. It supports all top audio formats, such as MP3, FLAC, etc.

To start using it, click on the template that you like. Then, hit the create now option. You can add a photo, music name, artist name, and more. Then, add the music file and click on the download option to save the file.

You may also like best music visualizer makers .

#8 Motionbox Music Visualizer

Price: Free | Sign up is required

Motionbox Music Visualizer is a super easy tool to use. This tool is often used by voice actors, musicians, and podcasters to add waveforms, mainly because of its easy-to-understand interface. It supports FLAC, WMA, WAV, MP3, and other formats.

To use it, visit Motionbox Music Visualizer’s official website and upload your audio. After that, trim your audio and finally add the waveform visualizer. Just three easy steps, and your video with waveform will be generated.

#9 Specterr Music Visualizer

Price: Pro: $25.00/month | Unlimited: $75.00/month | Free with a watermark

Specterr Music Visualizer provides you with built-in visualizer presets to choose from. The tool is reliable and very easy to use. After you add the waveform to your audio, you will not even have to spend time downloading it. Instead, you can share it directly to your Facebook, Twitter, YouTube, Instagram account.

To get started, you will first have to select a preset. You will see multiple presets. Then, you need to upload an audio file. It accepts MP3 or WAV. Once done, you can customize the visualizer, and finally, click on the Export option to export the video.

#10 Recast Studio

Price: Free

If you have a podcast ready and want to add waveform to it, you should try Recast Studio. It allows you to add unique animated audio waveforms, which will eventually increase conversion and boost social engagement. In addition, it is easy to use and saves your time with its visualizer presets.

To use, you will have to upload the audio. It accepts MP3. Then, you need to clip the audio. After that, browse through the template section and pick your favorite. You can then customize the video to enhance its quality, such as changing the color of the waveform, adding images, editing texts, and more. Finally, download the video.

#11 Clipchamp

Price: Free | Sign up required

Clipchamp is a free online audio visualizer that you can add audio waveforms to your videos. You will not have to spend hours manually creating waveforms. It lets you browse through its multiple templates. You can just choose one for your music videos, podcasts, etc., add the animated visualizer and get it done.

Here’s how you can use it. You need to visit the official website and upload the audio file, MP3, or WAV that you want to edit. After that, you need to apply an audio visualizer. You can add background and effects, too, if you wish. After you are all done, export your video.

Part 3: Why Should You Use Audio Visualization?

Audio entertainment has been around since time immemorial, and there’s no doubt about how big of an impact it has. However, when you add audio visualization, it enhances the listening experience by manifolds. Take podcasts, for example. They have become extremely popular.

In fact, there are currently more than 30 million podcast episodes running across the world. But when you combine audio visualization, it makes the audio even better. It becomes more engaging. Not that it sounds stand-alone can’t have an impact on the audience, but with audio visualization, it doubles itself when it comes to engagement and creating a lasting impression.

Conclusion

So, now you know about the top audio waveform video generators. You can choose one from the list we have mentioned and get started because your audios, such as lyrical music videos and podcasts, deserve the magical touch of an audio visualization. So, don’t miss out on it, and try an audio waveform generator today.

02 Part 2: Best Online Waveform Generators You Should Try!

03 Part 3: Why Should You Use Audio Visualization?

Part 1: What is a Waveform Generator?

Now, to create a waveform to audio and add it to a video, you need an audio waveform generator. So, what’s a waveform generator? It’s a tool that will let you design an attractive waveform to any audio and add it to a video. You can look for soundwave generators online since they are a plethora of them.

Please note that some sound wave generators are available online for free, while for others, you will have to pay a small fee. Waveforms can be both low and high. It’s just that the higher waveforms will signify the louder sounds, and the lower waveforms will signify lower sounds. What’s more? Waveforms look really cool and can enhance the video quality!

Part 2: Best Online Waveform Generators You Should Try

#1 VEED.IO

Price: Free

If you want to create waveform video from audio for free, the first waveform generator that you should try is VEED.IO. This fantastic waveform generator adds animated waveforms to videos. And it is free to use. The supported formats are MKV, M4A, M4V, MOV, MP4, MPEG, OPUS, MPG4, and more! In addition, VEED.IO can convert videos to the same supported formats.

To talk about its features, it’s a free online waveform generator. It allows you to be creative and lets you customize your sound wave just the way you want. You can place the waveform anywhere on the video; it enables you to edit your videos, such as adding text, audio, images, etc.

To use VEED.IO, you will first have to visit the official website and upload your video by clicking on the Choose Videos option. Once done, generate the waveform by clicking on the Elements option. Finally, click on the Export option, and that’s it!

#2 Kapwing

Price: Free plan | Upgrade: $24.00 per month.

Next up is Kapwing. It’s a simple-to-use multimedia editor that allows you to generate waveforms. This tool supports FLAC, MP3, and other popular video formats. It can export in MP4, AVI, FLV, 3GP, and other popular video formats. You can customize the waveform, frame your canvas, add custom text, enhance the video quality, etc.

To start using Kapwing, you will have to upload the video you want to edit. Then, you will have to add a waveform. After that, you can position the waveform as you like. You can change the speed, style, and color of the waveform later. Finally, once the waveform is ready, you can click on the download option.

The best part about Kapwing is that it lets you control the waveform as you like. Moreover, once the waveform is completed, you can share it with anyone you want.

#4 WaveVisual

Price: Free

WaveVisual is a free waveform generator and is an online tool. This means that you will not have to download WaveVisual on your computer. It lets you upload files directly from Spotify as well. It supports WAV, MP3, and many other formats.

There are three easy steps to follow. You need to upload an audio file, else copy the Spotify song link and paste it here on WaveVisual. Then, customize the design to create your unique waveform. Finally, click on the download option. You can even add a background image to make your waveform look extraordinary.

#5 Audiogram

Price Free | Registration required

The next online waveform generator is Audiogram. It not only lets you add waveform to your audios, but you can use the same tool to create editable transcripts as well. This tool is an ideal option for music videos and podcasts. The tool provides you with a fantastic library that consists of multiple templates. It supports MP3, WAV, etc.

The good thing about Audiogram is that it lets you customize the waveform to suit your needs and wants. To use it, please visit getaudiogram.com. Then, upload your audio, choose a design for your waveform, and once done, download, export, and share it!

#6 EchoWave.io

Price: Free

EchoWave.io lets you add different styles of waveforms, such as bar, radial, and line. It accepts MP3 and WAV audio formats and is free to use. EchoWave.io takes away the hard work you might have otherwise done if you didn’t have a waveform generator. You can use it to add a visual component to your lyrical songs, live streams, podcasts, images, and more.

To add a waveform, visit the official website, click on the upload option to upload the audio, choose animation style for the waveform, adjust the waveform as per your style and finally, generate the video and hit the render button to download the waveform video.

#7 RenderForest

Price: Free

RenderForest is a one-of-a-kind platform where you will find customizable waveform templates. Here, you need to choose a template and upload your audio, and RenderForest will take care of the rest. You can even add animated typography to enhance the video-watching experience. It supports all top audio formats, such as MP3, FLAC, etc.

To start using it, click on the template that you like. Then, hit the create now option. You can add a photo, music name, artist name, and more. Then, add the music file and click on the download option to save the file.

You may also like best music visualizer makers .

#8 Motionbox Music Visualizer

Price: Free | Sign up is required

Motionbox Music Visualizer is a super easy tool to use. This tool is often used by voice actors, musicians, and podcasters to add waveforms, mainly because of its easy-to-understand interface. It supports FLAC, WMA, WAV, MP3, and other formats.

To use it, visit Motionbox Music Visualizer’s official website and upload your audio. After that, trim your audio and finally add the waveform visualizer. Just three easy steps, and your video with waveform will be generated.

#9 Specterr Music Visualizer

Price: Pro: $25.00/month | Unlimited: $75.00/month | Free with a watermark

Specterr Music Visualizer provides you with built-in visualizer presets to choose from. The tool is reliable and very easy to use. After you add the waveform to your audio, you will not even have to spend time downloading it. Instead, you can share it directly to your Facebook, Twitter, YouTube, Instagram account.

To get started, you will first have to select a preset. You will see multiple presets. Then, you need to upload an audio file. It accepts MP3 or WAV. Once done, you can customize the visualizer, and finally, click on the Export option to export the video.

#10 Recast Studio

Price: Free

If you have a podcast ready and want to add waveform to it, you should try Recast Studio. It allows you to add unique animated audio waveforms, which will eventually increase conversion and boost social engagement. In addition, it is easy to use and saves your time with its visualizer presets.

To use, you will have to upload the audio. It accepts MP3. Then, you need to clip the audio. After that, browse through the template section and pick your favorite. You can then customize the video to enhance its quality, such as changing the color of the waveform, adding images, editing texts, and more. Finally, download the video.

#11 Clipchamp

Price: Free | Sign up required

Clipchamp is a free online audio visualizer that you can add audio waveforms to your videos. You will not have to spend hours manually creating waveforms. It lets you browse through its multiple templates. You can just choose one for your music videos, podcasts, etc., add the animated visualizer and get it done.

Here’s how you can use it. You need to visit the official website and upload the audio file, MP3, or WAV that you want to edit. After that, you need to apply an audio visualizer. You can add background and effects, too, if you wish. After you are all done, export your video.

Part 3: Why Should You Use Audio Visualization?

Audio entertainment has been around since time immemorial, and there’s no doubt about how big of an impact it has. However, when you add audio visualization, it enhances the listening experience by manifolds. Take podcasts, for example. They have become extremely popular.

In fact, there are currently more than 30 million podcast episodes running across the world. But when you combine audio visualization, it makes the audio even better. It becomes more engaging. Not that it sounds stand-alone can’t have an impact on the audience, but with audio visualization, it doubles itself when it comes to engagement and creating a lasting impression.

Conclusion

So, now you know about the top audio waveform video generators. You can choose one from the list we have mentioned and get started because your audios, such as lyrical music videos and podcasts, deserve the magical touch of an audio visualization. So, don’t miss out on it, and try an audio waveform generator today.

02 Part 2: Best Online Waveform Generators You Should Try!

03 Part 3: Why Should You Use Audio Visualization?

Part 1: What is a Waveform Generator?

Now, to create a waveform to audio and add it to a video, you need an audio waveform generator. So, what’s a waveform generator? It’s a tool that will let you design an attractive waveform to any audio and add it to a video. You can look for soundwave generators online since they are a plethora of them.

Please note that some sound wave generators are available online for free, while for others, you will have to pay a small fee. Waveforms can be both low and high. It’s just that the higher waveforms will signify the louder sounds, and the lower waveforms will signify lower sounds. What’s more? Waveforms look really cool and can enhance the video quality!

Part 2: Best Online Waveform Generators You Should Try

#1 VEED.IO

Price: Free

If you want to create waveform video from audio for free, the first waveform generator that you should try is VEED.IO. This fantastic waveform generator adds animated waveforms to videos. And it is free to use. The supported formats are MKV, M4A, M4V, MOV, MP4, MPEG, OPUS, MPG4, and more! In addition, VEED.IO can convert videos to the same supported formats.

To talk about its features, it’s a free online waveform generator. It allows you to be creative and lets you customize your sound wave just the way you want. You can place the waveform anywhere on the video; it enables you to edit your videos, such as adding text, audio, images, etc.

To use VEED.IO, you will first have to visit the official website and upload your video by clicking on the Choose Videos option. Once done, generate the waveform by clicking on the Elements option. Finally, click on the Export option, and that’s it!

#2 Kapwing

Price: Free plan | Upgrade: $24.00 per month.

Next up is Kapwing. It’s a simple-to-use multimedia editor that allows you to generate waveforms. This tool supports FLAC, MP3, and other popular video formats. It can export in MP4, AVI, FLV, 3GP, and other popular video formats. You can customize the waveform, frame your canvas, add custom text, enhance the video quality, etc.

To start using Kapwing, you will have to upload the video you want to edit. Then, you will have to add a waveform. After that, you can position the waveform as you like. You can change the speed, style, and color of the waveform later. Finally, once the waveform is ready, you can click on the download option.

The best part about Kapwing is that it lets you control the waveform as you like. Moreover, once the waveform is completed, you can share it with anyone you want.

#4 WaveVisual

Price: Free

WaveVisual is a free waveform generator and is an online tool. This means that you will not have to download WaveVisual on your computer. It lets you upload files directly from Spotify as well. It supports WAV, MP3, and many other formats.

There are three easy steps to follow. You need to upload an audio file, else copy the Spotify song link and paste it here on WaveVisual. Then, customize the design to create your unique waveform. Finally, click on the download option. You can even add a background image to make your waveform look extraordinary.

#5 Audiogram

Price Free | Registration required

The next online waveform generator is Audiogram. It not only lets you add waveform to your audios, but you can use the same tool to create editable transcripts as well. This tool is an ideal option for music videos and podcasts. The tool provides you with a fantastic library that consists of multiple templates. It supports MP3, WAV, etc.

The good thing about Audiogram is that it lets you customize the waveform to suit your needs and wants. To use it, please visit getaudiogram.com. Then, upload your audio, choose a design for your waveform, and once done, download, export, and share it!

#6 EchoWave.io

Price: Free

EchoWave.io lets you add different styles of waveforms, such as bar, radial, and line. It accepts MP3 and WAV audio formats and is free to use. EchoWave.io takes away the hard work you might have otherwise done if you didn’t have a waveform generator. You can use it to add a visual component to your lyrical songs, live streams, podcasts, images, and more.

To add a waveform, visit the official website, click on the upload option to upload the audio, choose animation style for the waveform, adjust the waveform as per your style and finally, generate the video and hit the render button to download the waveform video.

#7 RenderForest

Price: Free

RenderForest is a one-of-a-kind platform where you will find customizable waveform templates. Here, you need to choose a template and upload your audio, and RenderForest will take care of the rest. You can even add animated typography to enhance the video-watching experience. It supports all top audio formats, such as MP3, FLAC, etc.

To start using it, click on the template that you like. Then, hit the create now option. You can add a photo, music name, artist name, and more. Then, add the music file and click on the download option to save the file.

You may also like best music visualizer makers .

#8 Motionbox Music Visualizer

Price: Free | Sign up is required

Motionbox Music Visualizer is a super easy tool to use. This tool is often used by voice actors, musicians, and podcasters to add waveforms, mainly because of its easy-to-understand interface. It supports FLAC, WMA, WAV, MP3, and other formats.

To use it, visit Motionbox Music Visualizer’s official website and upload your audio. After that, trim your audio and finally add the waveform visualizer. Just three easy steps, and your video with waveform will be generated.

#9 Specterr Music Visualizer

Price: Pro: $25.00/month | Unlimited: $75.00/month | Free with a watermark

Specterr Music Visualizer provides you with built-in visualizer presets to choose from. The tool is reliable and very easy to use. After you add the waveform to your audio, you will not even have to spend time downloading it. Instead, you can share it directly to your Facebook, Twitter, YouTube, Instagram account.

To get started, you will first have to select a preset. You will see multiple presets. Then, you need to upload an audio file. It accepts MP3 or WAV. Once done, you can customize the visualizer, and finally, click on the Export option to export the video.

#10 Recast Studio

Price: Free

If you have a podcast ready and want to add waveform to it, you should try Recast Studio. It allows you to add unique animated audio waveforms, which will eventually increase conversion and boost social engagement. In addition, it is easy to use and saves your time with its visualizer presets.

To use, you will have to upload the audio. It accepts MP3. Then, you need to clip the audio. After that, browse through the template section and pick your favorite. You can then customize the video to enhance its quality, such as changing the color of the waveform, adding images, editing texts, and more. Finally, download the video.

#11 Clipchamp

Price: Free | Sign up required

Clipchamp is a free online audio visualizer that you can add audio waveforms to your videos. You will not have to spend hours manually creating waveforms. It lets you browse through its multiple templates. You can just choose one for your music videos, podcasts, etc., add the animated visualizer and get it done.

Here’s how you can use it. You need to visit the official website and upload the audio file, MP3, or WAV that you want to edit. After that, you need to apply an audio visualizer. You can add background and effects, too, if you wish. After you are all done, export your video.

Part 3: Why Should You Use Audio Visualization?

Audio entertainment has been around since time immemorial, and there’s no doubt about how big of an impact it has. However, when you add audio visualization, it enhances the listening experience by manifolds. Take podcasts, for example. They have become extremely popular.

In fact, there are currently more than 30 million podcast episodes running across the world. But when you combine audio visualization, it makes the audio even better. It becomes more engaging. Not that it sounds stand-alone can’t have an impact on the audience, but with audio visualization, it doubles itself when it comes to engagement and creating a lasting impression.

Conclusion

So, now you know about the top audio waveform video generators. You can choose one from the list we have mentioned and get started because your audios, such as lyrical music videos and podcasts, deserve the magical touch of an audio visualization. So, don’t miss out on it, and try an audio waveform generator today.

Create Cinematic Videos: The Ultimate Ken Burns Effect Guide

How to Make Ken Burns Effect in Final Cut Pro?

Liza Brown

Mar 27, 2024• Proven solutions

Ken Burns Effect is an advanced feature of Final Cut Pro that allows users to add creative animations to their videos and images within minutes. You just need to select your picture, add movements to the clip, and choose the start and the end position to produce high-resolution stills. Besides, you can do a tilt, zoom in, a pan, or a combination of these three moves on a single image. This way, you can use the Ken Burns Effect to highlight the stimulating features in your photograph and save your memories in the form of innovative and high-definition animated clips.

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

• Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
• Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
• Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Final Cut Pro is user-friendly software and makes it easy for you to create a Ken Burns Effect without having advanced skills and expertise. So, are you interested in knowing the best part? Given below are a few simple steps to create Ken Burns Effect and make your pictures and videos look adorable.

Step 1: Add Images to the Timeline

First of all, you should specify a name for your project and add photos to the timeline in Final Cut Pro. For this purpose, select multiple photos and press E. A clip will be added to the timeline as shown in figure 1.

Step 2: Check Your Settings

As you can see, our timeline has no other video clip. Hence, Final Cut Pro will not recognize the clip until you adjust the video properties such as format, resolution, and rate, etc. For this purpose, click OK to use your preferred settings and press Shift + Z to fit the picture to your timeline window. Once you’re done it’s time to apply the Ken Burns Effect.

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

1. Select the clip or picture;
2. See the lower left of the viewer;
3. Go to the Viewer window using the drop-down menu;
4. Tap on the pop-up menu located in the bottom left-hand corner;
5. Choose the Crop option from the menu or press Shift + C;
6. Press the Ken Burns button in the Crop onscreen controls to add the effect; and
7. Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

In the Ken Burns display, you can see the controls for adjusting the panning and zooms effects by changing the size and position of two-colored rectangles overlaying on the clip. To customize the Ken Burns effect:

1. Adjust the green rectangle’s size and position to set the start position;
2. Adjust the red rectangle’s size and position to set the end position;
3. The arrow depicts the direction of camera position between start and end position;
4. In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
5. You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

You’re not done yet because you need to hold your picture at the end of the animation. For this purpose, you should create a freezing frame at the end of the clip to make Ken Burns do this. Here’s the deal:

1. Press the Down arrow followed by the Left arrow to go to the last frame;
2. Press Option-F to add a freeze-frame;
3. Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

The users can also adjust the speed of the animation and the duration of the freeze-frame by trimming your clip. For this purpose, trim the length as per your requirement and it will optimize the speed as shown in figure 6.

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

1. Click on the Swap button;
2. The start frame will match the still frame (previous one);
3. Grab the end frame and move it to your desired position;
4. Apply enough zoom in to make the black areas disappear;
5. Preview to see how your animation looks.

Step 8: Play/Preview Looping

After you have optimized the speed of the Ken Burns Effect by trimming the clip’s length and have widened the shot to include everyone, it’s time to preview the changes you have made. Given below are simple steps:

• Press the Play Loop button;
• Tap on the Pause icon and return to editing;
• Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Although you can apply a single Ken Burns movement to your image, you can still give the impression of multiple movements being used. This means the Ken Burns Effect can be added to multiple camera movements by duplicating the photo and building numerous movements in sequence.

1. Add the first camera movement to your image;
2. Duplicate the clip by click and drag option or copy and paste option;
3. Press the Swap button in the Ken Burns settings to reverse the start and end positions;
4. Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

The Ken Burns Effect is a feature in Final Cut Pro to create a pan and zoom effect by using your predefined start and end positions. Basically, it is a crop effect with one crop at the start of the clip while the other at the end. Ken Burns Effect can be further customized by adjusting the smoothness of the animation. While creating a Ken Burns Effect, the motion applied to the video clips gets automatically smoothed to accelerate and decelerate the movement slowly at the start and the end of the animation.

Why the Effect is named after Ken Burns?

Now, as you have learned the purpose of the Ken Burns Effect, you must be curious about its name. It is named after American documentarian Ken Burns, who is known for his instantly recognizable and highly influential visual aesthetic. Surprisingly, Ken Burns did not invent this Ken Burns Effect; rather, it has existed for decades. You might be wondering why the technique was then named after Ken Burns. This was due to the persistent and adroit use of this technique that it is now known as the Ken Burns Effect.

What are the Applications of Ken Burns Effect?

Primarily, the Ken Burns Effect is used due to the unavailability of a film or video. The technique gives action to still photographs to glorify the subjects of interest like couples in wedding photography. It gets better and better as you apply simulated parallax with Ken Burns Effect to make your 2D images appear as 3D plus advanced zooming visuals. You can also use the Ken Burns effect to make a video of your graduation ceremony pictures or memorable moments of reunion. Ken Burns Effect is also used in documentaries by professional filmmakers and editors.

Conclusion

Adding animated effects to your pictures and videos makes them look gorgeous. This is crazy, isn’t it, when you impress your peers with your editing skills. So, what’s the bottom line of this whole discussion? Try adding the Ken Burns Effect with Final Cut Pro to create a pan and zoom effect on your pictures and clips get the output in your desired format.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Ken Burns Effect is an advanced feature of Final Cut Pro that allows users to add creative animations to their videos and images within minutes. You just need to select your picture, add movements to the clip, and choose the start and the end position to produce high-resolution stills. Besides, you can do a tilt, zoom in, a pan, or a combination of these three moves on a single image. This way, you can use the Ken Burns Effect to highlight the stimulating features in your photograph and save your memories in the form of innovative and high-definition animated clips.

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

• Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
• Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
• Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Final Cut Pro is user-friendly software and makes it easy for you to create a Ken Burns Effect without having advanced skills and expertise. So, are you interested in knowing the best part? Given below are a few simple steps to create Ken Burns Effect and make your pictures and videos look adorable.

Step 1: Add Images to the Timeline

First of all, you should specify a name for your project and add photos to the timeline in Final Cut Pro. For this purpose, select multiple photos and press E. A clip will be added to the timeline as shown in figure 1.

Step 2: Check Your Settings

As you can see, our timeline has no other video clip. Hence, Final Cut Pro will not recognize the clip until you adjust the video properties such as format, resolution, and rate, etc. For this purpose, click OK to use your preferred settings and press Shift + Z to fit the picture to your timeline window. Once you’re done it’s time to apply the Ken Burns Effect.

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

1. Select the clip or picture;
2. See the lower left of the viewer;
3. Go to the Viewer window using the drop-down menu;
4. Tap on the pop-up menu located in the bottom left-hand corner;
5. Choose the Crop option from the menu or press Shift + C;
6. Press the Ken Burns button in the Crop onscreen controls to add the effect; and
7. Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

In the Ken Burns display, you can see the controls for adjusting the panning and zooms effects by changing the size and position of two-colored rectangles overlaying on the clip. To customize the Ken Burns effect:

1. Adjust the green rectangle’s size and position to set the start position;
2. Adjust the red rectangle’s size and position to set the end position;
3. The arrow depicts the direction of camera position between start and end position;
4. In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
5. You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

You’re not done yet because you need to hold your picture at the end of the animation. For this purpose, you should create a freezing frame at the end of the clip to make Ken Burns do this. Here’s the deal:

1. Press the Down arrow followed by the Left arrow to go to the last frame;
2. Press Option-F to add a freeze-frame;
3. Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

The users can also adjust the speed of the animation and the duration of the freeze-frame by trimming your clip. For this purpose, trim the length as per your requirement and it will optimize the speed as shown in figure 6.

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

1. Click on the Swap button;
2. The start frame will match the still frame (previous one);
3. Grab the end frame and move it to your desired position;
4. Apply enough zoom in to make the black areas disappear;
5. Preview to see how your animation looks.

Step 8: Play/Preview Looping

After you have optimized the speed of the Ken Burns Effect by trimming the clip’s length and have widened the shot to include everyone, it’s time to preview the changes you have made. Given below are simple steps:

• Press the Play Loop button;
• Tap on the Pause icon and return to editing;
• Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Although you can apply a single Ken Burns movement to your image, you can still give the impression of multiple movements being used. This means the Ken Burns Effect can be added to multiple camera movements by duplicating the photo and building numerous movements in sequence.

1. Add the first camera movement to your image;
2. Duplicate the clip by click and drag option or copy and paste option;
3. Press the Swap button in the Ken Burns settings to reverse the start and end positions;
4. Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

The Ken Burns Effect is a feature in Final Cut Pro to create a pan and zoom effect by using your predefined start and end positions. Basically, it is a crop effect with one crop at the start of the clip while the other at the end. Ken Burns Effect can be further customized by adjusting the smoothness of the animation. While creating a Ken Burns Effect, the motion applied to the video clips gets automatically smoothed to accelerate and decelerate the movement slowly at the start and the end of the animation.

Why the Effect is named after Ken Burns?

Now, as you have learned the purpose of the Ken Burns Effect, you must be curious about its name. It is named after American documentarian Ken Burns, who is known for his instantly recognizable and highly influential visual aesthetic. Surprisingly, Ken Burns did not invent this Ken Burns Effect; rather, it has existed for decades. You might be wondering why the technique was then named after Ken Burns. This was due to the persistent and adroit use of this technique that it is now known as the Ken Burns Effect.

What are the Applications of Ken Burns Effect?

Primarily, the Ken Burns Effect is used due to the unavailability of a film or video. The technique gives action to still photographs to glorify the subjects of interest like couples in wedding photography. It gets better and better as you apply simulated parallax with Ken Burns Effect to make your 2D images appear as 3D plus advanced zooming visuals. You can also use the Ken Burns effect to make a video of your graduation ceremony pictures or memorable moments of reunion. Ken Burns Effect is also used in documentaries by professional filmmakers and editors.

Conclusion

Adding animated effects to your pictures and videos makes them look gorgeous. This is crazy, isn’t it, when you impress your peers with your editing skills. So, what’s the bottom line of this whole discussion? Try adding the Ken Burns Effect with Final Cut Pro to create a pan and zoom effect on your pictures and clips get the output in your desired format.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Ken Burns Effect is an advanced feature of Final Cut Pro that allows users to add creative animations to their videos and images within minutes. You just need to select your picture, add movements to the clip, and choose the start and the end position to produce high-resolution stills. Besides, you can do a tilt, zoom in, a pan, or a combination of these three moves on a single image. This way, you can use the Ken Burns Effect to highlight the stimulating features in your photograph and save your memories in the form of innovative and high-definition animated clips.

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

• Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
• Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
• Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Final Cut Pro is user-friendly software and makes it easy for you to create a Ken Burns Effect without having advanced skills and expertise. So, are you interested in knowing the best part? Given below are a few simple steps to create Ken Burns Effect and make your pictures and videos look adorable.

Step 1: Add Images to the Timeline

First of all, you should specify a name for your project and add photos to the timeline in Final Cut Pro. For this purpose, select multiple photos and press E. A clip will be added to the timeline as shown in figure 1.

Step 2: Check Your Settings

As you can see, our timeline has no other video clip. Hence, Final Cut Pro will not recognize the clip until you adjust the video properties such as format, resolution, and rate, etc. For this purpose, click OK to use your preferred settings and press Shift + Z to fit the picture to your timeline window. Once you’re done it’s time to apply the Ken Burns Effect.

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

1. Select the clip or picture;
2. See the lower left of the viewer;
3. Go to the Viewer window using the drop-down menu;
4. Tap on the pop-up menu located in the bottom left-hand corner;
5. Choose the Crop option from the menu or press Shift + C;
6. Press the Ken Burns button in the Crop onscreen controls to add the effect; and
7. Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

In the Ken Burns display, you can see the controls for adjusting the panning and zooms effects by changing the size and position of two-colored rectangles overlaying on the clip. To customize the Ken Burns effect:

1. Adjust the green rectangle’s size and position to set the start position;
2. Adjust the red rectangle’s size and position to set the end position;
3. The arrow depicts the direction of camera position between start and end position;
4. In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
5. You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

You’re not done yet because you need to hold your picture at the end of the animation. For this purpose, you should create a freezing frame at the end of the clip to make Ken Burns do this. Here’s the deal:

1. Press the Down arrow followed by the Left arrow to go to the last frame;
2. Press Option-F to add a freeze-frame;
3. Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

The users can also adjust the speed of the animation and the duration of the freeze-frame by trimming your clip. For this purpose, trim the length as per your requirement and it will optimize the speed as shown in figure 6.

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

1. Click on the Swap button;
2. The start frame will match the still frame (previous one);
3. Grab the end frame and move it to your desired position;
4. Apply enough zoom in to make the black areas disappear;
5. Preview to see how your animation looks.

Step 8: Play/Preview Looping

After you have optimized the speed of the Ken Burns Effect by trimming the clip’s length and have widened the shot to include everyone, it’s time to preview the changes you have made. Given below are simple steps:

• Press the Play Loop button;
• Tap on the Pause icon and return to editing;
• Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Although you can apply a single Ken Burns movement to your image, you can still give the impression of multiple movements being used. This means the Ken Burns Effect can be added to multiple camera movements by duplicating the photo and building numerous movements in sequence.

1. Add the first camera movement to your image;
2. Duplicate the clip by click and drag option or copy and paste option;
3. Press the Swap button in the Ken Burns settings to reverse the start and end positions;
4. Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

The Ken Burns Effect is a feature in Final Cut Pro to create a pan and zoom effect by using your predefined start and end positions. Basically, it is a crop effect with one crop at the start of the clip while the other at the end. Ken Burns Effect can be further customized by adjusting the smoothness of the animation. While creating a Ken Burns Effect, the motion applied to the video clips gets automatically smoothed to accelerate and decelerate the movement slowly at the start and the end of the animation.

Why the Effect is named after Ken Burns?

Now, as you have learned the purpose of the Ken Burns Effect, you must be curious about its name. It is named after American documentarian Ken Burns, who is known for his instantly recognizable and highly influential visual aesthetic. Surprisingly, Ken Burns did not invent this Ken Burns Effect; rather, it has existed for decades. You might be wondering why the technique was then named after Ken Burns. This was due to the persistent and adroit use of this technique that it is now known as the Ken Burns Effect.

What are the Applications of Ken Burns Effect?

Primarily, the Ken Burns Effect is used due to the unavailability of a film or video. The technique gives action to still photographs to glorify the subjects of interest like couples in wedding photography. It gets better and better as you apply simulated parallax with Ken Burns Effect to make your 2D images appear as 3D plus advanced zooming visuals. You can also use the Ken Burns effect to make a video of your graduation ceremony pictures or memorable moments of reunion. Ken Burns Effect is also used in documentaries by professional filmmakers and editors.

Conclusion

Adding animated effects to your pictures and videos makes them look gorgeous. This is crazy, isn’t it, when you impress your peers with your editing skills. So, what’s the bottom line of this whole discussion? Try adding the Ken Burns Effect with Final Cut Pro to create a pan and zoom effect on your pictures and clips get the output in your desired format.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Ken Burns Effect is an advanced feature of Final Cut Pro that allows users to add creative animations to their videos and images within minutes. You just need to select your picture, add movements to the clip, and choose the start and the end position to produce high-resolution stills. Besides, you can do a tilt, zoom in, a pan, or a combination of these three moves on a single image. This way, you can use the Ken Burns Effect to highlight the stimulating features in your photograph and save your memories in the form of innovative and high-definition animated clips.

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

• Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
• Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
• Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Final Cut Pro is user-friendly software and makes it easy for you to create a Ken Burns Effect without having advanced skills and expertise. So, are you interested in knowing the best part? Given below are a few simple steps to create Ken Burns Effect and make your pictures and videos look adorable.

Step 1: Add Images to the Timeline

First of all, you should specify a name for your project and add photos to the timeline in Final Cut Pro. For this purpose, select multiple photos and press E. A clip will be added to the timeline as shown in figure 1.

Step 2: Check Your Settings

As you can see, our timeline has no other video clip. Hence, Final Cut Pro will not recognize the clip until you adjust the video properties such as format, resolution, and rate, etc. For this purpose, click OK to use your preferred settings and press Shift + Z to fit the picture to your timeline window. Once you’re done it’s time to apply the Ken Burns Effect.

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

1. Select the clip or picture;
2. See the lower left of the viewer;
3. Go to the Viewer window using the drop-down menu;
4. Tap on the pop-up menu located in the bottom left-hand corner;
5. Choose the Crop option from the menu or press Shift + C;
6. Press the Ken Burns button in the Crop onscreen controls to add the effect; and
7. Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

In the Ken Burns display, you can see the controls for adjusting the panning and zooms effects by changing the size and position of two-colored rectangles overlaying on the clip. To customize the Ken Burns effect:

1. Adjust the green rectangle’s size and position to set the start position;
2. Adjust the red rectangle’s size and position to set the end position;
3. The arrow depicts the direction of camera position between start and end position;
4. In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
5. You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

You’re not done yet because you need to hold your picture at the end of the animation. For this purpose, you should create a freezing frame at the end of the clip to make Ken Burns do this. Here’s the deal:

1. Press the Down arrow followed by the Left arrow to go to the last frame;
2. Press Option-F to add a freeze-frame;
3. Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

The users can also adjust the speed of the animation and the duration of the freeze-frame by trimming your clip. For this purpose, trim the length as per your requirement and it will optimize the speed as shown in figure 6.

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

1. Click on the Swap button;
2. The start frame will match the still frame (previous one);
3. Grab the end frame and move it to your desired position;
4. Apply enough zoom in to make the black areas disappear;
5. Preview to see how your animation looks.

Step 8: Play/Preview Looping

After you have optimized the speed of the Ken Burns Effect by trimming the clip’s length and have widened the shot to include everyone, it’s time to preview the changes you have made. Given below are simple steps:

• Press the Play Loop button;
• Tap on the Pause icon and return to editing;
• Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Although you can apply a single Ken Burns movement to your image, you can still give the impression of multiple movements being used. This means the Ken Burns Effect can be added to multiple camera movements by duplicating the photo and building numerous movements in sequence.

1. Add the first camera movement to your image;
2. Duplicate the clip by click and drag option or copy and paste option;
3. Press the Swap button in the Ken Burns settings to reverse the start and end positions;
4. Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

The Ken Burns Effect is a feature in Final Cut Pro to create a pan and zoom effect by using your predefined start and end positions. Basically, it is a crop effect with one crop at the start of the clip while the other at the end. Ken Burns Effect can be further customized by adjusting the smoothness of the animation. While creating a Ken Burns Effect, the motion applied to the video clips gets automatically smoothed to accelerate and decelerate the movement slowly at the start and the end of the animation.

Why the Effect is named after Ken Burns?

Now, as you have learned the purpose of the Ken Burns Effect, you must be curious about its name. It is named after American documentarian Ken Burns, who is known for his instantly recognizable and highly influential visual aesthetic. Surprisingly, Ken Burns did not invent this Ken Burns Effect; rather, it has existed for decades. You might be wondering why the technique was then named after Ken Burns. This was due to the persistent and adroit use of this technique that it is now known as the Ken Burns Effect.

What are the Applications of Ken Burns Effect?

Primarily, the Ken Burns Effect is used due to the unavailability of a film or video. The technique gives action to still photographs to glorify the subjects of interest like couples in wedding photography. It gets better and better as you apply simulated parallax with Ken Burns Effect to make your 2D images appear as 3D plus advanced zooming visuals. You can also use the Ken Burns effect to make a video of your graduation ceremony pictures or memorable moments of reunion. Ken Burns Effect is also used in documentaries by professional filmmakers and editors.

Conclusion

Adding animated effects to your pictures and videos makes them look gorgeous. This is crazy, isn’t it, when you impress your peers with your editing skills. So, what’s the bottom line of this whole discussion? Try adding the Ken Burns Effect with Final Cut Pro to create a pan and zoom effect on your pictures and clips get the output in your desired format.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Transform Your Videos with 3D Effects: A Windows User’s Guide

You may want to add 3D effects to a video to make something in it appear realistic. For example, you can have balloons moving in a circle around a person’s head, make a building hit by a thunderstorm, etc. However, adding such properties to a footage requires a lot of focus and precision that comes with in-depth learning and a lot of practice.

That said, here you will learn how to add 3D effects to a video using Windows’s free built-in Photos app. In addition, you will also see how easy the process becomes if you use a dedicated third-party software that has been specifically designed for the purpose.

In this article

01 How to Add 3D Effects in Windows 11 Photos App for Free

02 How to Add 3D Effects to Video with Filmora

Part 1: How to Add 3D Effects in Windows 11 Photos App for Free

To add 3D effects to a video with the Photos app, you must right-click the media file, go to ‘Open with’, and click to select ‘Photos’ from the submenu. Once this is done, you can follow the steps that are given below to complete the remaining procedure:

Step 1: Open the 3D Effects Panel

In the Photos app, pause the video to avoid any distractions. Click the See more icon (with three horizontal dots) from the top-center, hover mouse to Edit more, and click Add 3D effects.

Step 2: Add a 3D Effect and Customize

Make sure that the Effects tab is selected from the top of the right pane, scroll through the available effects, and click the one that you want to add to the video. Once added, in the preview window, use the scaling handles and rotation tools to resize the effect and change its orientation respectively.

Optionally use the Volume slider from the right pane to increase or decrease the sound volume of the effect to blend it in with the audio of the footage. If required, drag the side handles of the effect in the progress bar at the bottom to increase or decrease the duration of the effect in the video.

Step 3: Use Anchor Point

Drag and place the 3D effect to the location you want it to appear at, turn on the Attach to a point button from the right pane, and drag the anchor point to the object where you want it to stick even if the camera moves.

Step 4: Export the Video

Click the Play button from the bottom to preview the video with the 3D effect, and if everything looks fine, click Save a copy from the bottom-right area.

When the Finish your video box appears, choose your preferred resolution from the Video quality drop-down list, and click Export.

Next, choose your preferred destination folder in the Save As box that opens up next, specify the name of the output file in the File name field, and click Export to export the modified clip in MP4 format.

Note: Videos that you export from the Photos app are by default saved in MP4 format.

As one of the best basic video editing software for beginners , the Microsoft Photos app allows you trim video, add text to video and much more. For details, check how to edit videos with the Microsoft Photos app on Windows 10 and Windows 11.

Part 2: How to Add 3D Effects to Video with Filmora

Although Photos is a free app in Windows 11, it has certain limitations. This is where Filmora video editor , a product by Wondershare, comes into play. Wondershare Filmora is a post-production application for both Windows and Mac computers, and is considered a good competitor of some of the industry-standard video editing applications like Adobe Premiere Pro, Final Cut Pro X, DaVinci Resolve, etc.

While the Photos app can add 3D effects to the videos quickly, Filmora gives more control by offering a plethora of editing tools, options, and presets. In addition, Filmora is a timeline-oriented tool that allows you to add effects, filters, and/or elements in their corresponding layers without making any changes to the original footage.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You can follow the step-by-step instructions that are given below to learn how to add 3D effects to a video with Wondershare Filmora:

Step 1: Import Source Video and Add It to the Timeline

After installing Wondershare Filmora on Windows 10 or Windows 11, launch the program, click anywhere inside the Media box present at the upper-left section of the interface, and locate and import the source video to the program. Next, hover the mouse over the thumbnail of the video, click the + icon from the bottom-right corner.

When the confirmation box appears, either click Match to Media or Keep Project Settings to adjust the project settings according to the media clip or modify the media clip according to the project preferences while adding the footage to the Timeline respectively.

Step 2: Add 3D Titles and Transitions

Click Titles from the toolbox at the top, type 3D Titles in the Search titles field present at the upper section of the upper-left box, and click 3D titles from the suggestions list.

From all the available 3D title presets that appear next, drag the one you like to the Timeline, and place it above the video track.

After this, double-click the placeholder text in the Preview window, and replace it with your caption. You can customize the font, color, and alignment of the text from the options that appear on left. Click OK from the lower-left area of the left pane to exit the editing mode. Repeat the process for all the texts that the preset has. Optionally, drag the sides of the 3D title in the Timeline to specify its duration of visibility on the screen.

To add the transitions, click Media from the toolbox at the top, click Import Media from the Media box, and repeat the process explained earlier to add a new video clip to the Timeline. Make sure that both the clips are on the same track, and are placed next to each other. Now, go to Transitions from the toolbox, and drag and place your preferred transition effect between the two media clips in the Timeline. Optionally you can drag the sides of the transition inwards or outwards to increase or decrease the speed of the effect respectively.

After this, move the Playhead (Skimmer) to the beginning of the Timeline, and press the Spacebar on your keyboard to preview the video.

Note: It is a good practice to preview your video several times during the entire editing process. This will help you identify the error sooner, and you will be able to address the issue with fewer hassles.

Step 3: Add Elements and Effects

Go to Elements from the toolbox, drag your preferred element from the upper-left box to the Timeline, and place it on a new track. You can drag the sides of the element in the Timeline to increase or decrease its visibility during video playback.

To add effects, go to Effects from the toolbox, drag your preferred effect from the upper-left box, and place it on a new layer in the Timeline. As it is with other entities, you can drag the sides of the effect to increase or decrease the duration of its impact on the video. Next, double-click the Effects layer in the Timeline, and use the available options in the box to make further adjustments.

Note: The options that you get by double-clicking the effect in the Timeline may vary according to the adjustments it allows you to make.

Once this is done, preview the video, click Export from the top-center, and use the tabs and options on the Export box to export the modified video in your preferred format.

Conclusion

If you are new to the VFX and video editing industry, trying hands with the Photos app would give you a fair idea about how things work. Once you are well-versed or if you are already a post-production professional, you can and you must go for a dedicated program like Wondershare Filmora that not only has an intuitive interface, it is also equipped with a plethora of presets to add 3D titles, elements, transitions, and effects to the videos without much hassle.

02 How to Add 3D Effects to Video with Filmora

Part 1: How to Add 3D Effects in Windows 11 Photos App for Free

To add 3D effects to a video with the Photos app, you must right-click the media file, go to ‘Open with’, and click to select ‘Photos’ from the submenu. Once this is done, you can follow the steps that are given below to complete the remaining procedure:

Step 1: Open the 3D Effects Panel

In the Photos app, pause the video to avoid any distractions. Click the See more icon (with three horizontal dots) from the top-center, hover mouse to Edit more, and click Add 3D effects.

Step 2: Add a 3D Effect and Customize

Make sure that the Effects tab is selected from the top of the right pane, scroll through the available effects, and click the one that you want to add to the video. Once added, in the preview window, use the scaling handles and rotation tools to resize the effect and change its orientation respectively.

Optionally use the Volume slider from the right pane to increase or decrease the sound volume of the effect to blend it in with the audio of the footage. If required, drag the side handles of the effect in the progress bar at the bottom to increase or decrease the duration of the effect in the video.

Step 3: Use Anchor Point

Drag and place the 3D effect to the location you want it to appear at, turn on the Attach to a point button from the right pane, and drag the anchor point to the object where you want it to stick even if the camera moves.

Step 4: Export the Video

Click the Play button from the bottom to preview the video with the 3D effect, and if everything looks fine, click Save a copy from the bottom-right area.

When the Finish your video box appears, choose your preferred resolution from the Video quality drop-down list, and click Export.

Next, choose your preferred destination folder in the Save As box that opens up next, specify the name of the output file in the File name field, and click Export to export the modified clip in MP4 format.

Note: Videos that you export from the Photos app are by default saved in MP4 format.

As one of the best basic video editing software for beginners , the Microsoft Photos app allows you trim video, add text to video and much more. For details, check how to edit videos with the Microsoft Photos app on Windows 10 and Windows 11.

Part 2: How to Add 3D Effects to Video with Filmora

Although Photos is a free app in Windows 11, it has certain limitations. This is where Filmora video editor , a product by Wondershare, comes into play. Wondershare Filmora is a post-production application for both Windows and Mac computers, and is considered a good competitor of some of the industry-standard video editing applications like Adobe Premiere Pro, Final Cut Pro X, DaVinci Resolve, etc.

While the Photos app can add 3D effects to the videos quickly, Filmora gives more control by offering a plethora of editing tools, options, and presets. In addition, Filmora is a timeline-oriented tool that allows you to add effects, filters, and/or elements in their corresponding layers without making any changes to the original footage.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You can follow the step-by-step instructions that are given below to learn how to add 3D effects to a video with Wondershare Filmora:

Step 1: Import Source Video and Add It to the Timeline

After installing Wondershare Filmora on Windows 10 or Windows 11, launch the program, click anywhere inside the Media box present at the upper-left section of the interface, and locate and import the source video to the program. Next, hover the mouse over the thumbnail of the video, click the + icon from the bottom-right corner.

When the confirmation box appears, either click Match to Media or Keep Project Settings to adjust the project settings according to the media clip or modify the media clip according to the project preferences while adding the footage to the Timeline respectively.

Step 2: Add 3D Titles and Transitions

Click Titles from the toolbox at the top, type 3D Titles in the Search titles field present at the upper section of the upper-left box, and click 3D titles from the suggestions list.

From all the available 3D title presets that appear next, drag the one you like to the Timeline, and place it above the video track.

After this, double-click the placeholder text in the Preview window, and replace it with your caption. You can customize the font, color, and alignment of the text from the options that appear on left. Click OK from the lower-left area of the left pane to exit the editing mode. Repeat the process for all the texts that the preset has. Optionally, drag the sides of the 3D title in the Timeline to specify its duration of visibility on the screen.

To add the transitions, click Media from the toolbox at the top, click Import Media from the Media box, and repeat the process explained earlier to add a new video clip to the Timeline. Make sure that both the clips are on the same track, and are placed next to each other. Now, go to Transitions from the toolbox, and drag and place your preferred transition effect between the two media clips in the Timeline. Optionally you can drag the sides of the transition inwards or outwards to increase or decrease the speed of the effect respectively.

After this, move the Playhead (Skimmer) to the beginning of the Timeline, and press the Spacebar on your keyboard to preview the video.

Note: It is a good practice to preview your video several times during the entire editing process. This will help you identify the error sooner, and you will be able to address the issue with fewer hassles.

Step 3: Add Elements and Effects

Go to Elements from the toolbox, drag your preferred element from the upper-left box to the Timeline, and place it on a new track. You can drag the sides of the element in the Timeline to increase or decrease its visibility during video playback.

To add effects, go to Effects from the toolbox, drag your preferred effect from the upper-left box, and place it on a new layer in the Timeline. As it is with other entities, you can drag the sides of the effect to increase or decrease the duration of its impact on the video. Next, double-click the Effects layer in the Timeline, and use the available options in the box to make further adjustments.

Note: The options that you get by double-clicking the effect in the Timeline may vary according to the adjustments it allows you to make.

Once this is done, preview the video, click Export from the top-center, and use the tabs and options on the Export box to export the modified video in your preferred format.

Conclusion

If you are new to the VFX and video editing industry, trying hands with the Photos app would give you a fair idea about how things work. Once you are well-versed or if you are already a post-production professional, you can and you must go for a dedicated program like Wondershare Filmora that not only has an intuitive interface, it is also equipped with a plethora of presets to add 3D titles, elements, transitions, and effects to the videos without much hassle.

02 How to Add 3D Effects to Video with Filmora

Part 1: How to Add 3D Effects in Windows 11 Photos App for Free

To add 3D effects to a video with the Photos app, you must right-click the media file, go to ‘Open with’, and click to select ‘Photos’ from the submenu. Once this is done, you can follow the steps that are given below to complete the remaining procedure:

Step 1: Open the 3D Effects Panel

In the Photos app, pause the video to avoid any distractions. Click the See more icon (with three horizontal dots) from the top-center, hover mouse to Edit more, and click Add 3D effects.

Step 2: Add a 3D Effect and Customize

Make sure that the Effects tab is selected from the top of the right pane, scroll through the available effects, and click the one that you want to add to the video. Once added, in the preview window, use the scaling handles and rotation tools to resize the effect and change its orientation respectively.

Optionally use the Volume slider from the right pane to increase or decrease the sound volume of the effect to blend it in with the audio of the footage. If required, drag the side handles of the effect in the progress bar at the bottom to increase or decrease the duration of the effect in the video.

Step 3: Use Anchor Point

Drag and place the 3D effect to the location you want it to appear at, turn on the Attach to a point button from the right pane, and drag the anchor point to the object where you want it to stick even if the camera moves.

Step 4: Export the Video

Click the Play button from the bottom to preview the video with the 3D effect, and if everything looks fine, click Save a copy from the bottom-right area.

When the Finish your video box appears, choose your preferred resolution from the Video quality drop-down list, and click Export.

Next, choose your preferred destination folder in the Save As box that opens up next, specify the name of the output file in the File name field, and click Export to export the modified clip in MP4 format.

Note: Videos that you export from the Photos app are by default saved in MP4 format.

As one of the best basic video editing software for beginners , the Microsoft Photos app allows you trim video, add text to video and much more. For details, check how to edit videos with the Microsoft Photos app on Windows 10 and Windows 11.

Part 2: How to Add 3D Effects to Video with Filmora

Although Photos is a free app in Windows 11, it has certain limitations. This is where Filmora video editor , a product by Wondershare, comes into play. Wondershare Filmora is a post-production application for both Windows and Mac computers, and is considered a good competitor of some of the industry-standard video editing applications like Adobe Premiere Pro, Final Cut Pro X, DaVinci Resolve, etc.

While the Photos app can add 3D effects to the videos quickly, Filmora gives more control by offering a plethora of editing tools, options, and presets. In addition, Filmora is a timeline-oriented tool that allows you to add effects, filters, and/or elements in their corresponding layers without making any changes to the original footage.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You can follow the step-by-step instructions that are given below to learn how to add 3D effects to a video with Wondershare Filmora:

Step 1: Import Source Video and Add It to the Timeline

After installing Wondershare Filmora on Windows 10 or Windows 11, launch the program, click anywhere inside the Media box present at the upper-left section of the interface, and locate and import the source video to the program. Next, hover the mouse over the thumbnail of the video, click the + icon from the bottom-right corner.

When the confirmation box appears, either click Match to Media or Keep Project Settings to adjust the project settings according to the media clip or modify the media clip according to the project preferences while adding the footage to the Timeline respectively.

Step 2: Add 3D Titles and Transitions

Click Titles from the toolbox at the top, type 3D Titles in the Search titles field present at the upper section of the upper-left box, and click 3D titles from the suggestions list.

From all the available 3D title presets that appear next, drag the one you like to the Timeline, and place it above the video track.

After this, double-click the placeholder text in the Preview window, and replace it with your caption. You can customize the font, color, and alignment of the text from the options that appear on left. Click OK from the lower-left area of the left pane to exit the editing mode. Repeat the process for all the texts that the preset has. Optionally, drag the sides of the 3D title in the Timeline to specify its duration of visibility on the screen.

To add the transitions, click Media from the toolbox at the top, click Import Media from the Media box, and repeat the process explained earlier to add a new video clip to the Timeline. Make sure that both the clips are on the same track, and are placed next to each other. Now, go to Transitions from the toolbox, and drag and place your preferred transition effect between the two media clips in the Timeline. Optionally you can drag the sides of the transition inwards or outwards to increase or decrease the speed of the effect respectively.

After this, move the Playhead (Skimmer) to the beginning of the Timeline, and press the Spacebar on your keyboard to preview the video.

Note: It is a good practice to preview your video several times during the entire editing process. This will help you identify the error sooner, and you will be able to address the issue with fewer hassles.

Step 3: Add Elements and Effects

Go to Elements from the toolbox, drag your preferred element from the upper-left box to the Timeline, and place it on a new track. You can drag the sides of the element in the Timeline to increase or decrease its visibility during video playback.

To add effects, go to Effects from the toolbox, drag your preferred effect from the upper-left box, and place it on a new layer in the Timeline. As it is with other entities, you can drag the sides of the effect to increase or decrease the duration of its impact on the video. Next, double-click the Effects layer in the Timeline, and use the available options in the box to make further adjustments.

Note: The options that you get by double-clicking the effect in the Timeline may vary according to the adjustments it allows you to make.

Once this is done, preview the video, click Export from the top-center, and use the tabs and options on the Export box to export the modified video in your preferred format.

Conclusion

If you are new to the VFX and video editing industry, trying hands with the Photos app would give you a fair idea about how things work. Once you are well-versed or if you are already a post-production professional, you can and you must go for a dedicated program like Wondershare Filmora that not only has an intuitive interface, it is also equipped with a plethora of presets to add 3D titles, elements, transitions, and effects to the videos without much hassle.

02 How to Add 3D Effects to Video with Filmora

Part 1: How to Add 3D Effects in Windows 11 Photos App for Free

To add 3D effects to a video with the Photos app, you must right-click the media file, go to ‘Open with’, and click to select ‘Photos’ from the submenu. Once this is done, you can follow the steps that are given below to complete the remaining procedure:

Step 1: Open the 3D Effects Panel

In the Photos app, pause the video to avoid any distractions. Click the See more icon (with three horizontal dots) from the top-center, hover mouse to Edit more, and click Add 3D effects.

Step 2: Add a 3D Effect and Customize

Make sure that the Effects tab is selected from the top of the right pane, scroll through the available effects, and click the one that you want to add to the video. Once added, in the preview window, use the scaling handles and rotation tools to resize the effect and change its orientation respectively.

Optionally use the Volume slider from the right pane to increase or decrease the sound volume of the effect to blend it in with the audio of the footage. If required, drag the side handles of the effect in the progress bar at the bottom to increase or decrease the duration of the effect in the video.

Step 3: Use Anchor Point

Drag and place the 3D effect to the location you want it to appear at, turn on the Attach to a point button from the right pane, and drag the anchor point to the object where you want it to stick even if the camera moves.

Step 4: Export the Video

Click the Play button from the bottom to preview the video with the 3D effect, and if everything looks fine, click Save a copy from the bottom-right area.

When the Finish your video box appears, choose your preferred resolution from the Video quality drop-down list, and click Export.

Next, choose your preferred destination folder in the Save As box that opens up next, specify the name of the output file in the File name field, and click Export to export the modified clip in MP4 format.

Note: Videos that you export from the Photos app are by default saved in MP4 format.

As one of the best basic video editing software for beginners , the Microsoft Photos app allows you trim video, add text to video and much more. For details, check how to edit videos with the Microsoft Photos app on Windows 10 and Windows 11.

Part 2: How to Add 3D Effects to Video with Filmora

Although Photos is a free app in Windows 11, it has certain limitations. This is where Filmora video editor , a product by Wondershare, comes into play. Wondershare Filmora is a post-production application for both Windows and Mac computers, and is considered a good competitor of some of the industry-standard video editing applications like Adobe Premiere Pro, Final Cut Pro X, DaVinci Resolve, etc.

While the Photos app can add 3D effects to the videos quickly, Filmora gives more control by offering a plethora of editing tools, options, and presets. In addition, Filmora is a timeline-oriented tool that allows you to add effects, filters, and/or elements in their corresponding layers without making any changes to the original footage.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You can follow the step-by-step instructions that are given below to learn how to add 3D effects to a video with Wondershare Filmora:

Step 1: Import Source Video and Add It to the Timeline

After installing Wondershare Filmora on Windows 10 or Windows 11, launch the program, click anywhere inside the Media box present at the upper-left section of the interface, and locate and import the source video to the program. Next, hover the mouse over the thumbnail of the video, click the + icon from the bottom-right corner.

When the confirmation box appears, either click Match to Media or Keep Project Settings to adjust the project settings according to the media clip or modify the media clip according to the project preferences while adding the footage to the Timeline respectively.

Step 2: Add 3D Titles and Transitions

Click Titles from the toolbox at the top, type 3D Titles in the Search titles field present at the upper section of the upper-left box, and click 3D titles from the suggestions list.

From all the available 3D title presets that appear next, drag the one you like to the Timeline, and place it above the video track.

After this, double-click the placeholder text in the Preview window, and replace it with your caption. You can customize the font, color, and alignment of the text from the options that appear on left. Click OK from the lower-left area of the left pane to exit the editing mode. Repeat the process for all the texts that the preset has. Optionally, drag the sides of the 3D title in the Timeline to specify its duration of visibility on the screen.

To add the transitions, click Media from the toolbox at the top, click Import Media from the Media box, and repeat the process explained earlier to add a new video clip to the Timeline. Make sure that both the clips are on the same track, and are placed next to each other. Now, go to Transitions from the toolbox, and drag and place your preferred transition effect between the two media clips in the Timeline. Optionally you can drag the sides of the transition inwards or outwards to increase or decrease the speed of the effect respectively.

After this, move the Playhead (Skimmer) to the beginning of the Timeline, and press the Spacebar on your keyboard to preview the video.

Note: It is a good practice to preview your video several times during the entire editing process. This will help you identify the error sooner, and you will be able to address the issue with fewer hassles.

Step 3: Add Elements and Effects

Go to Elements from the toolbox, drag your preferred element from the upper-left box to the Timeline, and place it on a new track. You can drag the sides of the element in the Timeline to increase or decrease its visibility during video playback.

To add effects, go to Effects from the toolbox, drag your preferred effect from the upper-left box, and place it on a new layer in the Timeline. As it is with other entities, you can drag the sides of the effect to increase or decrease the duration of its impact on the video. Next, double-click the Effects layer in the Timeline, and use the available options in the box to make further adjustments.

Note: The options that you get by double-clicking the effect in the Timeline may vary according to the adjustments it allows you to make.

Once this is done, preview the video, click Export from the top-center, and use the tabs and options on the Export box to export the modified video in your preferred format.

Conclusion

If you are new to the VFX and video editing industry, trying hands with the Photos app would give you a fair idea about how things work. Once you are well-versed or if you are already a post-production professional, you can and you must go for a dedicated program like Wondershare Filmora that not only has an intuitive interface, it is also equipped with a plethora of presets to add 3D titles, elements, transitions, and effects to the videos without much hassle.

Also read: