Linux on a Chromebook: The Complete Installation and Setup Guide

How to Install Linux on Chromebook

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Why Final Cut Pro Beats Final Cut Express?

Why Final Cut Pro Beats Final Cut Express

Liza Brown

Mar 27, 2024• Proven solutions

Boring and unexciting videos may turn off your mode. You need something special or wonderful that could turn you on and make your memories worth watching.

To let users give a new look to their pictures and videos, Apple Inc. released its first video editing software Final Cut Express in 2003. Over the next few years, various improvements were made in its updated versions.

However, after multiple inconveniences, Apple Inc. discontinued Final Cut Express in 2011 and launched its new version Final Cut Pro with advanced video editing features. Final Cut Pro was customized for video editing professionals with advanced knowledge of video editing. It is available for just $299.99 with 90 days free trial.

Some alternatives to Final Cut Express are also available in the market such as Final Cut Pro of crouse, iMovie, a low-end alternative, and Filmora, popular among beginners and pros. Let’s look at these tools individually in this article.

• Part 1: What is Final Cut Express?
• Part 2: Is Final Cut Express Still Available?
• Part 3: Major Differences between Final Cut Pro and Final Cut Express
• Part 4: iMovie, Final Cut Express, and Final Cut Pro, Which is the Best?
• Part 5: Best Alternative to Final Cut Express

Part 1: What is Final Cut Express?

Final Cut Express was a video editing software designed by Apple Inc. for advanced editing of digital and HD videos. It was a consumer version of Final Cut Pro liked by professional photographers, due to its better capabilities than iMovie.

Final Cut Express used to have many features like two-way color correction, dynamic RT, Chroma key, 99 audio tracks, split-screen, and picture-in-picture effects, motion path keyframing, 23 compositing modes, and opacity keyframing.

It also allowed the users to keyframe the filters and perform slide and blade edits. Eight years after its release, Apple discontinued Final Cut Express in 2011 in favor of Final Cut Pro X.

Part 2: Is Final Cut Express Still Available?

No, concurrent with the launch of Final Cut Pro X on June 21, 2011, Final Cut Express was discontinued and removed from the Apple online store.

You might be wondering what prompted Apple to do this. Well, the primary cause of the discontinuation of Final Cut Express was that Apple Inc. wanted to launch an advanced video editing software Final Cut Pro.

Besides, despite several attempts to improve the software’s performance, Final Cut Express kept on causing multiple inconveniences. The company eventually decided to discontinue Final Cut Express and introduce a new product to meet the ever-evolving needs of its customers.

As Final Cut Express withdrawal from the stage, many other editors still update to this day. For example, Filmora, an editor trusted by many beginners and pros, updates every month. Click download to try it for free!

Part 3: Major Differences between Final Cut Pro and Final Cut Express

Both Final Cut Express and Final Cut Pro were two high-performance, user-friendly, and advanced video editing software developed by Apple Inc. Both had amazing features and were liked by professional photographers, filmmakers, and editors. However, Apple Inc. discontinued Final Cut Express in 2011.

Today, Final Cut Pro incorporates all features of Final Cut Express plus some additional functions added by Apple Inc. later.

Given below are some of the key differences between these two software:

Final Cut Pro	Final Cut Express
The software is currently available on Apple Store and is supported by all iOS devices.	The software was discontinued in 2011 and can no longer be downloaded from Apple Store.
Effectiveness is guaranteed as the user will receive application updates.	Untrusted and unreliable software because no application updates are available.
Original version with advanced features	The consumer version of Final Cut Pro with limited features
The application performance keeps improving with new versions	The application performance kept on declining due to downgraded features
Heavyweight editing tools for better results	Simple editing tools
Costs $299	Costs $199
Recommended for experts and professionals	Recommended for beginners
Requires a system with better hardware and enhanced performance	Compatible with systems with less-advanced hardware

Part 4: iMovie, Final Cut Express, and Final Cut Pro, Which is the Best?

All these video editing software, iMovie, Final Cut Express, and Final Cut Pro are developed by Apple Inc. with different features and functions. However, they have different target audiences and offer diverse pricing plans according to the user’s needs.

The following table offers a detailed comparison of iMovie, Final Cut Express, and Final Cut Pro to help you choose the best one for advanced video editing.

No.	Parameter of Comparison	iMovie	Final Cut Express	Final Cut Pro
1	Target Audience	It is aimed at home users and who are beginners with no video editing skills	It is ideal for a bit advanced users with moderate knowledge of video editing	It is a professional product and targets professional photographers and video editors.
2	Features	Automated video editing video support Audio & music editing HD & 4K Video color settings Crop & rotate video clip Stabilization Video effects & transitions Timeline Photo & music import Pre-built themes & backdrops simultaneously	Two-way color correction Dynamic RT Chroma key 99 audio tracks Split-screen Picture-in-picture effects Motion path keyframing 23 compositing modes Opacity keyframing	Moving & Trimming Clips Multicam Editing 360 Degree VR Editing Effects VR Headset Playback Advanced Color Grading HDR Video Support Motion Graphics Templates Asset Management Plug-Ins
3	Interface	User-friendly and easy to understand	Complicated for beginners	Very complicated
4	Skill Set Required	Beginner	Moderate	Advanced
5	Advanced Sharing	Yes	No	No
6	Text Implementation	Limited Tools	Limited Tools	Advanced tools for easy text customization
7	Compatible OS	Mac OS X 10.10.2 or later	Mac OS X 10.10.2 or later	Mac OS X 10.10.2 or later, 64-bit processor
8	Workflow	Advanced	Moderate	Advanced
9	Supported HD Format	1080	1080	UHD 4K
10	iCloud sync	Yes	No	No
9	Operating Speed	Fast due to limited tools	Fast due to limited tools	Moderate due to advanced tools and effects
10	Advanced Effects	Presets	Presets with moderate effects	An array of advanced effects
11	Plugins and Integrations	Limited	Limited	Several third-party plugins
12	Color Correction Features	Focus on Image Improvement	Small editing of pictures	Total customization to match the footage tone
13	Pricing	Free of Cost	$199	90 days free trial then $299.99

Part 5: Best Alternative to Final Cut Express

Now, as Final Cut Express is no longer available, you may want to try the other two editors of Apple. While iMovie mainly targeted beginners, Final Cut Express and Pro targeted users with moderate to advanced knowledge of video editing.

For those beginners who wanted to make professional-looking videos without any editing skills, Wondershare launched Filmora as an alternative to Final Cut Express and Pro.

This user-friendly made video editing as simple as ABC. From offering multiple hand-picked effects to advanced editing options, Filmora allows you to range markers, perfect your audio, group timeline clips, and perform detailed color correction with auto-correction and color wheels for free.

Key Features

• Advanced video editing options;
• 300+ free handcrafted effects
• User-friendly video editing tools; and
• Video conversion options to multiple formats.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Boring and unexciting videos may turn off your mode. You need something special or wonderful that could turn you on and make your memories worth watching.

To let users give a new look to their pictures and videos, Apple Inc. released its first video editing software Final Cut Express in 2003. Over the next few years, various improvements were made in its updated versions.

However, after multiple inconveniences, Apple Inc. discontinued Final Cut Express in 2011 and launched its new version Final Cut Pro with advanced video editing features. Final Cut Pro was customized for video editing professionals with advanced knowledge of video editing. It is available for just $299.99 with 90 days free trial.

Some alternatives to Final Cut Express are also available in the market such as Final Cut Pro of crouse, iMovie, a low-end alternative, and Filmora, popular among beginners and pros. Let’s look at these tools individually in this article.

• Part 1: What is Final Cut Express?
• Part 2: Is Final Cut Express Still Available?
• Part 3: Major Differences between Final Cut Pro and Final Cut Express
• Part 4: iMovie, Final Cut Express, and Final Cut Pro, Which is the Best?
• Part 5: Best Alternative to Final Cut Express

Part 1: What is Final Cut Express?

Final Cut Express was a video editing software designed by Apple Inc. for advanced editing of digital and HD videos. It was a consumer version of Final Cut Pro liked by professional photographers, due to its better capabilities than iMovie.

Final Cut Express used to have many features like two-way color correction, dynamic RT, Chroma key, 99 audio tracks, split-screen, and picture-in-picture effects, motion path keyframing, 23 compositing modes, and opacity keyframing.

It also allowed the users to keyframe the filters and perform slide and blade edits. Eight years after its release, Apple discontinued Final Cut Express in 2011 in favor of Final Cut Pro X.

Part 2: Is Final Cut Express Still Available?

No, concurrent with the launch of Final Cut Pro X on June 21, 2011, Final Cut Express was discontinued and removed from the Apple online store.

You might be wondering what prompted Apple to do this. Well, the primary cause of the discontinuation of Final Cut Express was that Apple Inc. wanted to launch an advanced video editing software Final Cut Pro.

Besides, despite several attempts to improve the software’s performance, Final Cut Express kept on causing multiple inconveniences. The company eventually decided to discontinue Final Cut Express and introduce a new product to meet the ever-evolving needs of its customers.

As Final Cut Express withdrawal from the stage, many other editors still update to this day. For example, Filmora, an editor trusted by many beginners and pros, updates every month. Click download to try it for free!

Part 3: Major Differences between Final Cut Pro and Final Cut Express

Both Final Cut Express and Final Cut Pro were two high-performance, user-friendly, and advanced video editing software developed by Apple Inc. Both had amazing features and were liked by professional photographers, filmmakers, and editors. However, Apple Inc. discontinued Final Cut Express in 2011.

Today, Final Cut Pro incorporates all features of Final Cut Express plus some additional functions added by Apple Inc. later.

Given below are some of the key differences between these two software:

Final Cut Pro	Final Cut Express
The software is currently available on Apple Store and is supported by all iOS devices.	The software was discontinued in 2011 and can no longer be downloaded from Apple Store.
Effectiveness is guaranteed as the user will receive application updates.	Untrusted and unreliable software because no application updates are available.
Original version with advanced features	The consumer version of Final Cut Pro with limited features
The application performance keeps improving with new versions	The application performance kept on declining due to downgraded features
Heavyweight editing tools for better results	Simple editing tools
Costs $299	Costs $199
Recommended for experts and professionals	Recommended for beginners
Requires a system with better hardware and enhanced performance	Compatible with systems with less-advanced hardware

Part 4: iMovie, Final Cut Express, and Final Cut Pro, Which is the Best?

All these video editing software, iMovie, Final Cut Express, and Final Cut Pro are developed by Apple Inc. with different features and functions. However, they have different target audiences and offer diverse pricing plans according to the user’s needs.

The following table offers a detailed comparison of iMovie, Final Cut Express, and Final Cut Pro to help you choose the best one for advanced video editing.

No.	Parameter of Comparison	iMovie	Final Cut Express	Final Cut Pro
1	Target Audience	It is aimed at home users and who are beginners with no video editing skills	It is ideal for a bit advanced users with moderate knowledge of video editing	It is a professional product and targets professional photographers and video editors.
2	Features	Automated video editing video support Audio & music editing HD & 4K Video color settings Crop & rotate video clip Stabilization Video effects & transitions Timeline Photo & music import Pre-built themes & backdrops simultaneously	Two-way color correction Dynamic RT Chroma key 99 audio tracks Split-screen Picture-in-picture effects Motion path keyframing 23 compositing modes Opacity keyframing	Moving & Trimming Clips Multicam Editing 360 Degree VR Editing Effects VR Headset Playback Advanced Color Grading HDR Video Support Motion Graphics Templates Asset Management Plug-Ins
3	Interface	User-friendly and easy to understand	Complicated for beginners	Very complicated
4	Skill Set Required	Beginner	Moderate	Advanced
5	Advanced Sharing	Yes	No	No
6	Text Implementation	Limited Tools	Limited Tools	Advanced tools for easy text customization
7	Compatible OS	Mac OS X 10.10.2 or later	Mac OS X 10.10.2 or later	Mac OS X 10.10.2 or later, 64-bit processor
8	Workflow	Advanced	Moderate	Advanced
9	Supported HD Format	1080	1080	UHD 4K
10	iCloud sync	Yes	No	No
9	Operating Speed	Fast due to limited tools	Fast due to limited tools	Moderate due to advanced tools and effects
10	Advanced Effects	Presets	Presets with moderate effects	An array of advanced effects
11	Plugins and Integrations	Limited	Limited	Several third-party plugins
12	Color Correction Features	Focus on Image Improvement	Small editing of pictures	Total customization to match the footage tone
13	Pricing	Free of Cost	$199	90 days free trial then $299.99

Part 5: Best Alternative to Final Cut Express

Now, as Final Cut Express is no longer available, you may want to try the other two editors of Apple. While iMovie mainly targeted beginners, Final Cut Express and Pro targeted users with moderate to advanced knowledge of video editing.

For those beginners who wanted to make professional-looking videos without any editing skills, Wondershare launched Filmora as an alternative to Final Cut Express and Pro.

This user-friendly made video editing as simple as ABC. From offering multiple hand-picked effects to advanced editing options, Filmora allows you to range markers, perfect your audio, group timeline clips, and perform detailed color correction with auto-correction and color wheels for free.

Key Features

• Advanced video editing options;
• 300+ free handcrafted effects
• User-friendly video editing tools; and
• Video conversion options to multiple formats.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Boring and unexciting videos may turn off your mode. You need something special or wonderful that could turn you on and make your memories worth watching.

To let users give a new look to their pictures and videos, Apple Inc. released its first video editing software Final Cut Express in 2003. Over the next few years, various improvements were made in its updated versions.

However, after multiple inconveniences, Apple Inc. discontinued Final Cut Express in 2011 and launched its new version Final Cut Pro with advanced video editing features. Final Cut Pro was customized for video editing professionals with advanced knowledge of video editing. It is available for just $299.99 with 90 days free trial.

Some alternatives to Final Cut Express are also available in the market such as Final Cut Pro of crouse, iMovie, a low-end alternative, and Filmora, popular among beginners and pros. Let’s look at these tools individually in this article.

• Part 1: What is Final Cut Express?
• Part 2: Is Final Cut Express Still Available?
• Part 3: Major Differences between Final Cut Pro and Final Cut Express
• Part 4: iMovie, Final Cut Express, and Final Cut Pro, Which is the Best?
• Part 5: Best Alternative to Final Cut Express

Part 1: What is Final Cut Express?

Final Cut Express was a video editing software designed by Apple Inc. for advanced editing of digital and HD videos. It was a consumer version of Final Cut Pro liked by professional photographers, due to its better capabilities than iMovie.

Final Cut Express used to have many features like two-way color correction, dynamic RT, Chroma key, 99 audio tracks, split-screen, and picture-in-picture effects, motion path keyframing, 23 compositing modes, and opacity keyframing.

It also allowed the users to keyframe the filters and perform slide and blade edits. Eight years after its release, Apple discontinued Final Cut Express in 2011 in favor of Final Cut Pro X.

Part 2: Is Final Cut Express Still Available?

No, concurrent with the launch of Final Cut Pro X on June 21, 2011, Final Cut Express was discontinued and removed from the Apple online store.

You might be wondering what prompted Apple to do this. Well, the primary cause of the discontinuation of Final Cut Express was that Apple Inc. wanted to launch an advanced video editing software Final Cut Pro.

Besides, despite several attempts to improve the software’s performance, Final Cut Express kept on causing multiple inconveniences. The company eventually decided to discontinue Final Cut Express and introduce a new product to meet the ever-evolving needs of its customers.

As Final Cut Express withdrawal from the stage, many other editors still update to this day. For example, Filmora, an editor trusted by many beginners and pros, updates every month. Click download to try it for free!

Part 3: Major Differences between Final Cut Pro and Final Cut Express

Both Final Cut Express and Final Cut Pro were two high-performance, user-friendly, and advanced video editing software developed by Apple Inc. Both had amazing features and were liked by professional photographers, filmmakers, and editors. However, Apple Inc. discontinued Final Cut Express in 2011.

Today, Final Cut Pro incorporates all features of Final Cut Express plus some additional functions added by Apple Inc. later.

Given below are some of the key differences between these two software:

Final Cut Pro	Final Cut Express
The software is currently available on Apple Store and is supported by all iOS devices.	The software was discontinued in 2011 and can no longer be downloaded from Apple Store.
Effectiveness is guaranteed as the user will receive application updates.	Untrusted and unreliable software because no application updates are available.
Original version with advanced features	The consumer version of Final Cut Pro with limited features
The application performance keeps improving with new versions	The application performance kept on declining due to downgraded features
Heavyweight editing tools for better results	Simple editing tools
Costs $299	Costs $199
Recommended for experts and professionals	Recommended for beginners
Requires a system with better hardware and enhanced performance	Compatible with systems with less-advanced hardware

Part 4: iMovie, Final Cut Express, and Final Cut Pro, Which is the Best?

All these video editing software, iMovie, Final Cut Express, and Final Cut Pro are developed by Apple Inc. with different features and functions. However, they have different target audiences and offer diverse pricing plans according to the user’s needs.

The following table offers a detailed comparison of iMovie, Final Cut Express, and Final Cut Pro to help you choose the best one for advanced video editing.

No.	Parameter of Comparison	iMovie	Final Cut Express	Final Cut Pro
1	Target Audience	It is aimed at home users and who are beginners with no video editing skills	It is ideal for a bit advanced users with moderate knowledge of video editing	It is a professional product and targets professional photographers and video editors.
2	Features	Automated video editing video support Audio & music editing HD & 4K Video color settings Crop & rotate video clip Stabilization Video effects & transitions Timeline Photo & music import Pre-built themes & backdrops simultaneously	Two-way color correction Dynamic RT Chroma key 99 audio tracks Split-screen Picture-in-picture effects Motion path keyframing 23 compositing modes Opacity keyframing	Moving & Trimming Clips Multicam Editing 360 Degree VR Editing Effects VR Headset Playback Advanced Color Grading HDR Video Support Motion Graphics Templates Asset Management Plug-Ins
3	Interface	User-friendly and easy to understand	Complicated for beginners	Very complicated
4	Skill Set Required	Beginner	Moderate	Advanced
5	Advanced Sharing	Yes	No	No
6	Text Implementation	Limited Tools	Limited Tools	Advanced tools for easy text customization
7	Compatible OS	Mac OS X 10.10.2 or later	Mac OS X 10.10.2 or later	Mac OS X 10.10.2 or later, 64-bit processor
8	Workflow	Advanced	Moderate	Advanced
9	Supported HD Format	1080	1080	UHD 4K
10	iCloud sync	Yes	No	No
9	Operating Speed	Fast due to limited tools	Fast due to limited tools	Moderate due to advanced tools and effects
10	Advanced Effects	Presets	Presets with moderate effects	An array of advanced effects
11	Plugins and Integrations	Limited	Limited	Several third-party plugins
12	Color Correction Features	Focus on Image Improvement	Small editing of pictures	Total customization to match the footage tone
13	Pricing	Free of Cost	$199	90 days free trial then $299.99

Part 5: Best Alternative to Final Cut Express

Now, as Final Cut Express is no longer available, you may want to try the other two editors of Apple. While iMovie mainly targeted beginners, Final Cut Express and Pro targeted users with moderate to advanced knowledge of video editing.

For those beginners who wanted to make professional-looking videos without any editing skills, Wondershare launched Filmora as an alternative to Final Cut Express and Pro.

This user-friendly made video editing as simple as ABC. From offering multiple hand-picked effects to advanced editing options, Filmora allows you to range markers, perfect your audio, group timeline clips, and perform detailed color correction with auto-correction and color wheels for free.

Key Features

• Advanced video editing options;
• 300+ free handcrafted effects
• User-friendly video editing tools; and
• Video conversion options to multiple formats.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Boring and unexciting videos may turn off your mode. You need something special or wonderful that could turn you on and make your memories worth watching.

To let users give a new look to their pictures and videos, Apple Inc. released its first video editing software Final Cut Express in 2003. Over the next few years, various improvements were made in its updated versions.

However, after multiple inconveniences, Apple Inc. discontinued Final Cut Express in 2011 and launched its new version Final Cut Pro with advanced video editing features. Final Cut Pro was customized for video editing professionals with advanced knowledge of video editing. It is available for just $299.99 with 90 days free trial.

Some alternatives to Final Cut Express are also available in the market such as Final Cut Pro of crouse, iMovie, a low-end alternative, and Filmora, popular among beginners and pros. Let’s look at these tools individually in this article.

• Part 1: What is Final Cut Express?
• Part 2: Is Final Cut Express Still Available?
• Part 3: Major Differences between Final Cut Pro and Final Cut Express
• Part 4: iMovie, Final Cut Express, and Final Cut Pro, Which is the Best?
• Part 5: Best Alternative to Final Cut Express

Part 1: What is Final Cut Express?

Final Cut Express was a video editing software designed by Apple Inc. for advanced editing of digital and HD videos. It was a consumer version of Final Cut Pro liked by professional photographers, due to its better capabilities than iMovie.

Final Cut Express used to have many features like two-way color correction, dynamic RT, Chroma key, 99 audio tracks, split-screen, and picture-in-picture effects, motion path keyframing, 23 compositing modes, and opacity keyframing.

It also allowed the users to keyframe the filters and perform slide and blade edits. Eight years after its release, Apple discontinued Final Cut Express in 2011 in favor of Final Cut Pro X.

Part 2: Is Final Cut Express Still Available?

No, concurrent with the launch of Final Cut Pro X on June 21, 2011, Final Cut Express was discontinued and removed from the Apple online store.

You might be wondering what prompted Apple to do this. Well, the primary cause of the discontinuation of Final Cut Express was that Apple Inc. wanted to launch an advanced video editing software Final Cut Pro.

Besides, despite several attempts to improve the software’s performance, Final Cut Express kept on causing multiple inconveniences. The company eventually decided to discontinue Final Cut Express and introduce a new product to meet the ever-evolving needs of its customers.

As Final Cut Express withdrawal from the stage, many other editors still update to this day. For example, Filmora, an editor trusted by many beginners and pros, updates every month. Click download to try it for free!

Part 3: Major Differences between Final Cut Pro and Final Cut Express

Both Final Cut Express and Final Cut Pro were two high-performance, user-friendly, and advanced video editing software developed by Apple Inc. Both had amazing features and were liked by professional photographers, filmmakers, and editors. However, Apple Inc. discontinued Final Cut Express in 2011.

Today, Final Cut Pro incorporates all features of Final Cut Express plus some additional functions added by Apple Inc. later.

Given below are some of the key differences between these two software:

Final Cut Pro	Final Cut Express
The software is currently available on Apple Store and is supported by all iOS devices.	The software was discontinued in 2011 and can no longer be downloaded from Apple Store.
Effectiveness is guaranteed as the user will receive application updates.	Untrusted and unreliable software because no application updates are available.
Original version with advanced features	The consumer version of Final Cut Pro with limited features
The application performance keeps improving with new versions	The application performance kept on declining due to downgraded features
Heavyweight editing tools for better results	Simple editing tools
Costs $299	Costs $199
Recommended for experts and professionals	Recommended for beginners
Requires a system with better hardware and enhanced performance	Compatible with systems with less-advanced hardware

Part 4: iMovie, Final Cut Express, and Final Cut Pro, Which is the Best?

All these video editing software, iMovie, Final Cut Express, and Final Cut Pro are developed by Apple Inc. with different features and functions. However, they have different target audiences and offer diverse pricing plans according to the user’s needs.

The following table offers a detailed comparison of iMovie, Final Cut Express, and Final Cut Pro to help you choose the best one for advanced video editing.

No.	Parameter of Comparison	iMovie	Final Cut Express	Final Cut Pro
1	Target Audience	It is aimed at home users and who are beginners with no video editing skills	It is ideal for a bit advanced users with moderate knowledge of video editing	It is a professional product and targets professional photographers and video editors.
2	Features	Automated video editing video support Audio & music editing HD & 4K Video color settings Crop & rotate video clip Stabilization Video effects & transitions Timeline Photo & music import Pre-built themes & backdrops simultaneously	Two-way color correction Dynamic RT Chroma key 99 audio tracks Split-screen Picture-in-picture effects Motion path keyframing 23 compositing modes Opacity keyframing	Moving & Trimming Clips Multicam Editing 360 Degree VR Editing Effects VR Headset Playback Advanced Color Grading HDR Video Support Motion Graphics Templates Asset Management Plug-Ins
3	Interface	User-friendly and easy to understand	Complicated for beginners	Very complicated
4	Skill Set Required	Beginner	Moderate	Advanced
5	Advanced Sharing	Yes	No	No
6	Text Implementation	Limited Tools	Limited Tools	Advanced tools for easy text customization
7	Compatible OS	Mac OS X 10.10.2 or later	Mac OS X 10.10.2 or later	Mac OS X 10.10.2 or later, 64-bit processor
8	Workflow	Advanced	Moderate	Advanced
9	Supported HD Format	1080	1080	UHD 4K
10	iCloud sync	Yes	No	No
9	Operating Speed	Fast due to limited tools	Fast due to limited tools	Moderate due to advanced tools and effects
10	Advanced Effects	Presets	Presets with moderate effects	An array of advanced effects
11	Plugins and Integrations	Limited	Limited	Several third-party plugins
12	Color Correction Features	Focus on Image Improvement	Small editing of pictures	Total customization to match the footage tone
13	Pricing	Free of Cost	$199	90 days free trial then $299.99

Part 5: Best Alternative to Final Cut Express

Now, as Final Cut Express is no longer available, you may want to try the other two editors of Apple. While iMovie mainly targeted beginners, Final Cut Express and Pro targeted users with moderate to advanced knowledge of video editing.

For those beginners who wanted to make professional-looking videos without any editing skills, Wondershare launched Filmora as an alternative to Final Cut Express and Pro.

This user-friendly made video editing as simple as ABC. From offering multiple hand-picked effects to advanced editing options, Filmora allows you to range markers, perfect your audio, group timeline clips, and perform detailed color correction with auto-correction and color wheels for free.

Key Features

• Advanced video editing options;
• 300+ free handcrafted effects
• User-friendly video editing tools; and
• Video conversion options to multiple formats.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Effortless Color Matching in Final Cut Pro: A Beginner’s Guide

How to Easily Match Color in Video Clips with Final Cut Pro

Benjamin Arango

Aug 18, 2022• Proven solutions

If you are involved in video editing or post-production activities, then you might be familiar with color matching. In this, we make sure that the overall color and tone of our videos are matched throughout. Thankfully, you can easily do color match in Final Cut Pro or any other reliable video editing tool. In this detailed Final Cut Pro match color tutorial, I will help you do the same and would also share details about its best alternative.

Part 1: How to Use Final Cut Pro X to Match Colors: A Stepwise Guide

Final Cut Pro X has to be one of the most resourceful Mac applications that you can use to edit your videos. If you want, you can use the automatic FCPX match color tool in the application to automatically apply the effect. Besides that, you can manually match color in Final Cut Pro X by using its inbuilt features.

Method 1: Using the Final Cut Pro Match Color Tool

To use the Final Cut Pro X Match Color feature, you can simply go through these simple steps:

Step 1: Load and import the video clips

To begin with, you can just launch Final Cut Pro on your Mac and go to its File > Import > Media to load any video clip of your choice. You can simply drag and drop your videos to the Final Cut Pro interface.

Step 2: Apply the FCPX Match Color effect

Now, simply select the clip you want to edit, go to the Enhancement menu, and click on the Match Color icon (below the viewer). You can also find it under the Modify > Match Color option or get the feature by pressing the Option + Command + M key combination.

Afterward, the Color Match FCPX tool will display two different screens in the viewer. On the right, you would have the clip from where you can match the source while the target clip will be displayed on the left.

From the Final Cut Pro timeline or the browser, you can find the appropriate clips. If you want, you can even import a still image to source the respective colors for matching. Simply preview the changes that the FCPX Color Match tool will make and click on the “Apply Match” in the end.

Method 2: Adjust the Video Color Manually

Apart from the match color tool in Final Cut, you can also manually set the color grading and saturation feature. While this will not get you instant or exact results to color match in Final Cut Pro, you can still give it a try.

Once the video clip is loaded on Filmora, just go to the Effects Browser > Inspector and add the Color Correction effect to the video. Now, you can go to the Color Correction tab from the sidebar to manually adjust the value for color, saturation, and exposure to get the desired effects.

Part 2: Wondershare Filmora: The Best Alternative to FCPX Color Match Tool

Since Final Cut Pro is not the most user-friendly application, a lot of people look for other alternatives to perform operations like color match. Therefore, you can also take the assistance of Wondershare Filmora . It is a powerful video editing and post-production tool that is extremely easy to use and runs on all the major macOS versions.

• On Filmora, you can find seamless options like color matching, color tuning, splitting, resizing, scene detection, and so on.
• There are also tons of advanced video editing features in Filmora like keyframing, motion detection, green screen edits, etc.
• You can find a wide range of effects, presets, texts, stickers, transitions, and more in the Filmora library.
• There are also dedicated options to edit audio in your media files or add voiceovers.
• Filmora is one of the easiest video editing tools out there with import/export options for all the leading formats.

To perform automatic color matching in your videos using Wondershare Filmora, the following steps can be taken:

Step 1: Import the video to edit on Filmora

At first, you can just launch Filmora on your Mac and drag-and-drop the video you want to edit. You can also go to its File > Import Media to load any video of your choice on Filmora and just drag the clips to the timeline (at the bottom).

Step 2: Apply Color Correction to your Clips

If you want, you can add multiple clips on Filmora and simply add them to the timeline as per your requirements.

You can now take the playhead and place it from where you wish to edit the video. You can select the remaining clip (or photos), right-click, and choose the Color Match option. Alternatively, you can also click on the color palette icon on the timeline’s toolbar and select the “Color Match” button.

This will change the viewer into two screens. Here, you can select the reference picture or clip as a source and preview its effects on the target clip. You can also go to the Color tab on the side and adjust its level under the Comparison View section.

On the viewer window, you can see all the changes, and click on the “Match” button to apply the effect.

Step 3: Export your video to a preferred format

After making the needed changes and applying the color correction feature, you can go to the Export option of the tool. Here, you can choose a preferred format to export your file and even choose its resolution and video quality.

I’m sure that after reading this post you would be able to apply color match in Final Cut Pro. As you can see, I have included a stepwise tutorial that anyone can follow to use the Final Cut Pro Match Color tool. Though, if you are looking for a better and more user-friendly option, then explore Wondershare Filmora. The free video editing application offers a wide range of features and will certainly meet every post-production need of yours in no time!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Aug 18, 2022• Proven solutions

If you are involved in video editing or post-production activities, then you might be familiar with color matching. In this, we make sure that the overall color and tone of our videos are matched throughout. Thankfully, you can easily do color match in Final Cut Pro or any other reliable video editing tool. In this detailed Final Cut Pro match color tutorial, I will help you do the same and would also share details about its best alternative.

Part 1: How to Use Final Cut Pro X to Match Colors: A Stepwise Guide

Final Cut Pro X has to be one of the most resourceful Mac applications that you can use to edit your videos. If you want, you can use the automatic FCPX match color tool in the application to automatically apply the effect. Besides that, you can manually match color in Final Cut Pro X by using its inbuilt features.

Method 1: Using the Final Cut Pro Match Color Tool

To use the Final Cut Pro X Match Color feature, you can simply go through these simple steps:

Step 1: Load and import the video clips

To begin with, you can just launch Final Cut Pro on your Mac and go to its File > Import > Media to load any video clip of your choice. You can simply drag and drop your videos to the Final Cut Pro interface.

Step 2: Apply the FCPX Match Color effect

Now, simply select the clip you want to edit, go to the Enhancement menu, and click on the Match Color icon (below the viewer). You can also find it under the Modify > Match Color option or get the feature by pressing the Option + Command + M key combination.

Afterward, the Color Match FCPX tool will display two different screens in the viewer. On the right, you would have the clip from where you can match the source while the target clip will be displayed on the left.

From the Final Cut Pro timeline or the browser, you can find the appropriate clips. If you want, you can even import a still image to source the respective colors for matching. Simply preview the changes that the FCPX Color Match tool will make and click on the “Apply Match” in the end.

Method 2: Adjust the Video Color Manually

Apart from the match color tool in Final Cut, you can also manually set the color grading and saturation feature. While this will not get you instant or exact results to color match in Final Cut Pro, you can still give it a try.

Once the video clip is loaded on Filmora, just go to the Effects Browser > Inspector and add the Color Correction effect to the video. Now, you can go to the Color Correction tab from the sidebar to manually adjust the value for color, saturation, and exposure to get the desired effects.

Part 2: Wondershare Filmora: The Best Alternative to FCPX Color Match Tool

Since Final Cut Pro is not the most user-friendly application, a lot of people look for other alternatives to perform operations like color match. Therefore, you can also take the assistance of Wondershare Filmora . It is a powerful video editing and post-production tool that is extremely easy to use and runs on all the major macOS versions.

• On Filmora, you can find seamless options like color matching, color tuning, splitting, resizing, scene detection, and so on.
• There are also tons of advanced video editing features in Filmora like keyframing, motion detection, green screen edits, etc.
• You can find a wide range of effects, presets, texts, stickers, transitions, and more in the Filmora library.
• There are also dedicated options to edit audio in your media files or add voiceovers.
• Filmora is one of the easiest video editing tools out there with import/export options for all the leading formats.

To perform automatic color matching in your videos using Wondershare Filmora, the following steps can be taken:

Step 1: Import the video to edit on Filmora

At first, you can just launch Filmora on your Mac and drag-and-drop the video you want to edit. You can also go to its File > Import Media to load any video of your choice on Filmora and just drag the clips to the timeline (at the bottom).

Step 2: Apply Color Correction to your Clips

If you want, you can add multiple clips on Filmora and simply add them to the timeline as per your requirements.

You can now take the playhead and place it from where you wish to edit the video. You can select the remaining clip (or photos), right-click, and choose the Color Match option. Alternatively, you can also click on the color palette icon on the timeline’s toolbar and select the “Color Match” button.

This will change the viewer into two screens. Here, you can select the reference picture or clip as a source and preview its effects on the target clip. You can also go to the Color tab on the side and adjust its level under the Comparison View section.

On the viewer window, you can see all the changes, and click on the “Match” button to apply the effect.

Step 3: Export your video to a preferred format

After making the needed changes and applying the color correction feature, you can go to the Export option of the tool. Here, you can choose a preferred format to export your file and even choose its resolution and video quality.

I’m sure that after reading this post you would be able to apply color match in Final Cut Pro. As you can see, I have included a stepwise tutorial that anyone can follow to use the Final Cut Pro Match Color tool. Though, if you are looking for a better and more user-friendly option, then explore Wondershare Filmora. The free video editing application offers a wide range of features and will certainly meet every post-production need of yours in no time!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Aug 18, 2022• Proven solutions

If you are involved in video editing or post-production activities, then you might be familiar with color matching. In this, we make sure that the overall color and tone of our videos are matched throughout. Thankfully, you can easily do color match in Final Cut Pro or any other reliable video editing tool. In this detailed Final Cut Pro match color tutorial, I will help you do the same and would also share details about its best alternative.

Part 1: How to Use Final Cut Pro X to Match Colors: A Stepwise Guide

Final Cut Pro X has to be one of the most resourceful Mac applications that you can use to edit your videos. If you want, you can use the automatic FCPX match color tool in the application to automatically apply the effect. Besides that, you can manually match color in Final Cut Pro X by using its inbuilt features.

Method 1: Using the Final Cut Pro Match Color Tool

To use the Final Cut Pro X Match Color feature, you can simply go through these simple steps:

Step 1: Load and import the video clips

To begin with, you can just launch Final Cut Pro on your Mac and go to its File > Import > Media to load any video clip of your choice. You can simply drag and drop your videos to the Final Cut Pro interface.

Step 2: Apply the FCPX Match Color effect

Now, simply select the clip you want to edit, go to the Enhancement menu, and click on the Match Color icon (below the viewer). You can also find it under the Modify > Match Color option or get the feature by pressing the Option + Command + M key combination.

Afterward, the Color Match FCPX tool will display two different screens in the viewer. On the right, you would have the clip from where you can match the source while the target clip will be displayed on the left.

From the Final Cut Pro timeline or the browser, you can find the appropriate clips. If you want, you can even import a still image to source the respective colors for matching. Simply preview the changes that the FCPX Color Match tool will make and click on the “Apply Match” in the end.

Method 2: Adjust the Video Color Manually

Apart from the match color tool in Final Cut, you can also manually set the color grading and saturation feature. While this will not get you instant or exact results to color match in Final Cut Pro, you can still give it a try.

Once the video clip is loaded on Filmora, just go to the Effects Browser > Inspector and add the Color Correction effect to the video. Now, you can go to the Color Correction tab from the sidebar to manually adjust the value for color, saturation, and exposure to get the desired effects.

Part 2: Wondershare Filmora: The Best Alternative to FCPX Color Match Tool

Since Final Cut Pro is not the most user-friendly application, a lot of people look for other alternatives to perform operations like color match. Therefore, you can also take the assistance of Wondershare Filmora . It is a powerful video editing and post-production tool that is extremely easy to use and runs on all the major macOS versions.

• On Filmora, you can find seamless options like color matching, color tuning, splitting, resizing, scene detection, and so on.
• There are also tons of advanced video editing features in Filmora like keyframing, motion detection, green screen edits, etc.
• You can find a wide range of effects, presets, texts, stickers, transitions, and more in the Filmora library.
• There are also dedicated options to edit audio in your media files or add voiceovers.
• Filmora is one of the easiest video editing tools out there with import/export options for all the leading formats.

To perform automatic color matching in your videos using Wondershare Filmora, the following steps can be taken:

Step 1: Import the video to edit on Filmora

At first, you can just launch Filmora on your Mac and drag-and-drop the video you want to edit. You can also go to its File > Import Media to load any video of your choice on Filmora and just drag the clips to the timeline (at the bottom).

Step 2: Apply Color Correction to your Clips

If you want, you can add multiple clips on Filmora and simply add them to the timeline as per your requirements.

You can now take the playhead and place it from where you wish to edit the video. You can select the remaining clip (or photos), right-click, and choose the Color Match option. Alternatively, you can also click on the color palette icon on the timeline’s toolbar and select the “Color Match” button.

This will change the viewer into two screens. Here, you can select the reference picture or clip as a source and preview its effects on the target clip. You can also go to the Color tab on the side and adjust its level under the Comparison View section.

On the viewer window, you can see all the changes, and click on the “Match” button to apply the effect.

Step 3: Export your video to a preferred format

After making the needed changes and applying the color correction feature, you can go to the Export option of the tool. Here, you can choose a preferred format to export your file and even choose its resolution and video quality.

I’m sure that after reading this post you would be able to apply color match in Final Cut Pro. As you can see, I have included a stepwise tutorial that anyone can follow to use the Final Cut Pro Match Color tool. Though, if you are looking for a better and more user-friendly option, then explore Wondershare Filmora. The free video editing application offers a wide range of features and will certainly meet every post-production need of yours in no time!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Aug 18, 2022• Proven solutions

If you are involved in video editing or post-production activities, then you might be familiar with color matching. In this, we make sure that the overall color and tone of our videos are matched throughout. Thankfully, you can easily do color match in Final Cut Pro or any other reliable video editing tool. In this detailed Final Cut Pro match color tutorial, I will help you do the same and would also share details about its best alternative.

Part 1: How to Use Final Cut Pro X to Match Colors: A Stepwise Guide

Final Cut Pro X has to be one of the most resourceful Mac applications that you can use to edit your videos. If you want, you can use the automatic FCPX match color tool in the application to automatically apply the effect. Besides that, you can manually match color in Final Cut Pro X by using its inbuilt features.

Method 1: Using the Final Cut Pro Match Color Tool

To use the Final Cut Pro X Match Color feature, you can simply go through these simple steps:

Step 1: Load and import the video clips

To begin with, you can just launch Final Cut Pro on your Mac and go to its File > Import > Media to load any video clip of your choice. You can simply drag and drop your videos to the Final Cut Pro interface.

Step 2: Apply the FCPX Match Color effect

Now, simply select the clip you want to edit, go to the Enhancement menu, and click on the Match Color icon (below the viewer). You can also find it under the Modify > Match Color option or get the feature by pressing the Option + Command + M key combination.

Afterward, the Color Match FCPX tool will display two different screens in the viewer. On the right, you would have the clip from where you can match the source while the target clip will be displayed on the left.

From the Final Cut Pro timeline or the browser, you can find the appropriate clips. If you want, you can even import a still image to source the respective colors for matching. Simply preview the changes that the FCPX Color Match tool will make and click on the “Apply Match” in the end.

Method 2: Adjust the Video Color Manually

Apart from the match color tool in Final Cut, you can also manually set the color grading and saturation feature. While this will not get you instant or exact results to color match in Final Cut Pro, you can still give it a try.

Once the video clip is loaded on Filmora, just go to the Effects Browser > Inspector and add the Color Correction effect to the video. Now, you can go to the Color Correction tab from the sidebar to manually adjust the value for color, saturation, and exposure to get the desired effects.

Part 2: Wondershare Filmora: The Best Alternative to FCPX Color Match Tool

Since Final Cut Pro is not the most user-friendly application, a lot of people look for other alternatives to perform operations like color match. Therefore, you can also take the assistance of Wondershare Filmora . It is a powerful video editing and post-production tool that is extremely easy to use and runs on all the major macOS versions.

• On Filmora, you can find seamless options like color matching, color tuning, splitting, resizing, scene detection, and so on.
• There are also tons of advanced video editing features in Filmora like keyframing, motion detection, green screen edits, etc.
• You can find a wide range of effects, presets, texts, stickers, transitions, and more in the Filmora library.
• There are also dedicated options to edit audio in your media files or add voiceovers.
• Filmora is one of the easiest video editing tools out there with import/export options for all the leading formats.

To perform automatic color matching in your videos using Wondershare Filmora, the following steps can be taken:

Step 1: Import the video to edit on Filmora

At first, you can just launch Filmora on your Mac and drag-and-drop the video you want to edit. You can also go to its File > Import Media to load any video of your choice on Filmora and just drag the clips to the timeline (at the bottom).

Step 2: Apply Color Correction to your Clips

If you want, you can add multiple clips on Filmora and simply add them to the timeline as per your requirements.

You can now take the playhead and place it from where you wish to edit the video. You can select the remaining clip (or photos), right-click, and choose the Color Match option. Alternatively, you can also click on the color palette icon on the timeline’s toolbar and select the “Color Match” button.

This will change the viewer into two screens. Here, you can select the reference picture or clip as a source and preview its effects on the target clip. You can also go to the Color tab on the side and adjust its level under the Comparison View section.

On the viewer window, you can see all the changes, and click on the “Match” button to apply the effect.

Step 3: Export your video to a preferred format

After making the needed changes and applying the color correction feature, you can go to the Export option of the tool. Here, you can choose a preferred format to export your file and even choose its resolution and video quality.

I’m sure that after reading this post you would be able to apply color match in Final Cut Pro. As you can see, I have included a stepwise tutorial that anyone can follow to use the Final Cut Pro Match Color tool. Though, if you are looking for a better and more user-friendly option, then explore Wondershare Filmora. The free video editing application offers a wide range of features and will certainly meet every post-production need of yours in no time!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Fixing Shaky Videos: A Step-by-Step Guide to Stabilization in Adobe Premiere Pro

Stabilize Shaky Videos After Recording Easily

Wondershare Filmora is one of the most popular video editing software among YouTubers , which provides the video stabilization tool to remove shake from videos within one-click. Download and have a try now.

Try It Free Try It Free

Most of the photos or videos we shoot on our cameras feel shaky and a bit too jarring. Also, a camera shake is imminent when filming a video, especially while we’re zooming in to get an ideal shot. In this situation, we don’t need to go to a professional to stabilize the videos or look right. Fortunately, Adobe Premiere Pro has some valuable tools to help you take the shake out of your videos or photos, giving you stabilized and smooth footage.

The Adobe Premiere Pro is a professional video editor that can fix unwanted camera shake in just a few clicks, giving fine-tuning to the footage – exactly the feel and looks you want! So, here in this article, we’re going to describe the guideline about Adobe Premiere Pro stabilization.

In this article

01 Why Should You Stabilize Your Video?

02 What Is Warp Stabilizer?

03 How to Stabilize A Shaky Video In Premiere Pro with Warp Stabilizer?

04 Top 5 Warp Stabilizer Tips and Troubleshooting:

05 How to Stabilize Shaky Footage Without Using Warp Stabilizer?

Part 1: Why Should You Stabilize Your Video?

Being an artistic or aesthetic choice, we might love a slightly shaken photo or video. But if it looks a little more shrill or jerky, we need to smooth it out! There are many reasons you might want to fix your irregular or shaky videos.

Generally, the shaky videos are due to our unintended movements during shooting. It can make your footage look less polished, sparkle, and glossy. Moreover, it can lower your photos or videos’ overall production quality and status. Therefore, this can be extremely disturbing for the viewers, creating a sense of mistrust.

Part 2: What Is Warp Stabilizer?

Warp Stabilizer is the effect in the Adobe Premiere Pro and Adobe After Effects that can quickly smooth out your jittery footage with just a few clicks. It can save your work – fix the smaller shakes while you’re strolling or standing still. So, now you can stabilize motion by using the Warp Stabilizer effect in Adobe Premiere Pro. However, the premiere stabilization is not a substitute for all – you may require some other program for your clips as you may also observe some lost details on the edges of the footage frame. Now let’s have a look at the benefits of Warp Stabilizer!

• It’s a built-in tool in Adobe Premiere Pro, so you don’t need to install additional software or plugin.
• You can easily remove jerkiness and jitter from your footage caused by your camera movement and convert them into smooth and steady shots.
• The results are fast, quick, and automatic.

Further, there are three more parameters to consider while using a Warp stabilizer for stabilizing the shaky footage.

• Process ( an algorithm that can analyze and track the footage)
• Smoothness ( called the strength of the effect)
• Framing ( it can handle the edges of the clips)

Part 3: How to Stabilize A Shaky Video In Premiere Pro with Warp Stabilizer?

Many filmmakers or shooters rely on handheld capture as it’s a fast, cheap, and usually intimate method. But do you know how they handle shaky footage? A handy Warp stabilizer tool in Adobe Premiere Pro lets you smooth your shaky videos or photos in minutes! So, if you find yourself dealing with photos or clips with a noticeable amount of shake, stabilize video premiere is your solution! Let’s discuss the process in detail about how Warp Stabilizer work in Adobe Premiere Pro to stabilize the footage.

Step 1: Choose the video clip you want to stabilize. Add it to your timeline and move to your “Effects” workspace. Hit on the Effects panel.

Step 2: Open the “Video Effects” folder and go to the ‘’Distort’’ option. Scroll down to ‘’Warp Stabilizer’’ and double click on it. Or search warp and you will see the Warp Stabilizer option under Video Effects.

Step 3: Wait for some time until Adobe Premiere Pro analyzes your video clip for Stabilization.

Step 4: Adjust the ‘’Smoothness’’ parameter of the video clip to modify the overall amount of Stabilization.

Step 5: Choose Stabilization> Result > No motion for creating the effect of a stationary camera with zero movements or select Smooth motion for only removing the shakiness of the video. And then click on Analyze to assess your video film.

Part 4: Top 5 Warp Stabilizer Tips and Troubleshooting

Premiere Pro stabilize is a powerful tool, but it also carries some limitations. Let’s check them out!

1. Consider warp stabilize during shooting:

If you keep in mind the warp stabilizer function while filming your videos or photos, you’ll get rid of fixing problems after the work. So, if you want glossy touch in your shots with zero access to a gimbal, you should consider filming with a faster shutter speed or a wider frame. In this way, you’ll get more convenience while applying the effect in the edit.

2. Modify extra cropping in your footage:

Warp stabilizer is a tool that can provide you stable footage and crop your shot as well. It can crop out the edges of your photos or videos, giving you a smooth and clean shot. To adjust the cropping in your clips, go to advanced settings and then click on Crop less <-> Smooth More Slider.

3. Analyze the effect of Warp stabilizer:

Always check the order of effects in the ‘’Effect Controls’’ folder. If you ever lost some stabilization after editing your shot, ensure not to change the Warp Stabilizer analysis source. Further, you should always re-analyze your clip after a quick color fix.

4. Nest your clips:

Sometimes we got an error message in the form of a red banner across our footage while trying to modify the speed on premiere stabilize video. Basically, we can’t use a Warp stabilizer to alter the speed of the same clip. But no worries! There is an easy fix – click on the altered clip and then click on Nest. Now, you can fix the nested sequence without any trouble.

5. Save your favorite settings as a preset:

If you’ve found a setting that gives you a happy result, you can save it as a preset for future use. In this way, you can speed up your work nicely while working with numerous shaky clips. Also, it can help if you want to make a similar effect to your multiple projects. Moreover, keep in mind that the Warp stabilizer needs to assess each clip frame by frame because it is not a one-size model that can fit all footage. Therefore, remember to click the ‘’Analyze’’ button even after putting the preset to turn it on.

Part 5: How to Stabilize Shaky Footage Without Using Warp Stabilizer?

Sometimes, the shakiness of clips is too extreme, and the Warp Stabilizer effect can’t handle it. Moreover, the filter algorithm incorrectly compensates for the camera moves. So what strategy should apply in this condition? Luckily, there is a method that can be used to stabilize your clips without using a warp stabilizer. Moreover, this process can give a hyper-realistic effect to your footage!

Step1: Import your clip into Premiere Pro Project and add it to your timeline. Hit on the “clip”, choose “Replace with After Effects Composition” to import the clip.

Step 2: Tap on the ‘’Tracker panel’’ from the right side of the screen. Scroll down to the ‘’Track Motion’’ option and open it.

Step 3: Pick the tracker marker, drag it to an area of contrasting subject and adjust it accordingly.

Tip: Remember not to make the outer box too large as After Effects can have a hard time performing the track.

Step 4: Hit the play button in the ‘’Tracker panel’’ to initiate the After Effects. Create a new ‘’Null Object’’ after the tracking process is complete.

Step 5: Move to the Tracker panel, click on “Edit Target,” choose your “Null Object” and click “OK.”

Step 6: Create a new camera and parent it to the null object for applying the stabilization effect to your clips. Enable the 3D option on both the footage layer and the null object.

Step 7: Extend your footage to compensate for any black bars that can occur as the camera pays for the shakiness. That’s it!

Conclusion:

Shaky footage is almost inescapable once you go handheld. If you don’t have a manual stabilizer like a gimbal, a tripod, or a glide cam – your work can fall victim to running, wind, walking, or other elements. In this article, we’ve introduced a quick and fast antidote for shaky footage – a Warp Stabilizer effect in the Adobe Premiere Pro. It can smooth out your shaky photos or videos with just a few clicks. So, do you know how to stabilize video premiere pro? Read out the article!

Try It Free Try It Free

Most of the photos or videos we shoot on our cameras feel shaky and a bit too jarring. Also, a camera shake is imminent when filming a video, especially while we’re zooming in to get an ideal shot. In this situation, we don’t need to go to a professional to stabilize the videos or look right. Fortunately, Adobe Premiere Pro has some valuable tools to help you take the shake out of your videos or photos, giving you stabilized and smooth footage.

The Adobe Premiere Pro is a professional video editor that can fix unwanted camera shake in just a few clicks, giving fine-tuning to the footage – exactly the feel and looks you want! So, here in this article, we’re going to describe the guideline about Adobe Premiere Pro stabilization.

In this article

01 Why Should You Stabilize Your Video?

02 What Is Warp Stabilizer?

03 How to Stabilize A Shaky Video In Premiere Pro with Warp Stabilizer?

04 Top 5 Warp Stabilizer Tips and Troubleshooting:

05 How to Stabilize Shaky Footage Without Using Warp Stabilizer?

Part 1: Why Should You Stabilize Your Video?

Being an artistic or aesthetic choice, we might love a slightly shaken photo or video. But if it looks a little more shrill or jerky, we need to smooth it out! There are many reasons you might want to fix your irregular or shaky videos.

Generally, the shaky videos are due to our unintended movements during shooting. It can make your footage look less polished, sparkle, and glossy. Moreover, it can lower your photos or videos’ overall production quality and status. Therefore, this can be extremely disturbing for the viewers, creating a sense of mistrust.

Part 2: What Is Warp Stabilizer?

Warp Stabilizer is the effect in the Adobe Premiere Pro and Adobe After Effects that can quickly smooth out your jittery footage with just a few clicks. It can save your work – fix the smaller shakes while you’re strolling or standing still. So, now you can stabilize motion by using the Warp Stabilizer effect in Adobe Premiere Pro. However, the premiere stabilization is not a substitute for all – you may require some other program for your clips as you may also observe some lost details on the edges of the footage frame. Now let’s have a look at the benefits of Warp Stabilizer!

• It’s a built-in tool in Adobe Premiere Pro, so you don’t need to install additional software or plugin.
• You can easily remove jerkiness and jitter from your footage caused by your camera movement and convert them into smooth and steady shots.
• The results are fast, quick, and automatic.

Further, there are three more parameters to consider while using a Warp stabilizer for stabilizing the shaky footage.

• Process ( an algorithm that can analyze and track the footage)
• Smoothness ( called the strength of the effect)
• Framing ( it can handle the edges of the clips)

Part 3: How to Stabilize A Shaky Video In Premiere Pro with Warp Stabilizer?

Many filmmakers or shooters rely on handheld capture as it’s a fast, cheap, and usually intimate method. But do you know how they handle shaky footage? A handy Warp stabilizer tool in Adobe Premiere Pro lets you smooth your shaky videos or photos in minutes! So, if you find yourself dealing with photos or clips with a noticeable amount of shake, stabilize video premiere is your solution! Let’s discuss the process in detail about how Warp Stabilizer work in Adobe Premiere Pro to stabilize the footage.

Step 1: Choose the video clip you want to stabilize. Add it to your timeline and move to your “Effects” workspace. Hit on the Effects panel.

Step 2: Open the “Video Effects” folder and go to the ‘’Distort’’ option. Scroll down to ‘’Warp Stabilizer’’ and double click on it. Or search warp and you will see the Warp Stabilizer option under Video Effects.

Step 3: Wait for some time until Adobe Premiere Pro analyzes your video clip for Stabilization.

Step 4: Adjust the ‘’Smoothness’’ parameter of the video clip to modify the overall amount of Stabilization.

Step 5: Choose Stabilization> Result > No motion for creating the effect of a stationary camera with zero movements or select Smooth motion for only removing the shakiness of the video. And then click on Analyze to assess your video film.

Part 4: Top 5 Warp Stabilizer Tips and Troubleshooting

Premiere Pro stabilize is a powerful tool, but it also carries some limitations. Let’s check them out!

1. Consider warp stabilize during shooting:

If you keep in mind the warp stabilizer function while filming your videos or photos, you’ll get rid of fixing problems after the work. So, if you want glossy touch in your shots with zero access to a gimbal, you should consider filming with a faster shutter speed or a wider frame. In this way, you’ll get more convenience while applying the effect in the edit.

2. Modify extra cropping in your footage:

Warp stabilizer is a tool that can provide you stable footage and crop your shot as well. It can crop out the edges of your photos or videos, giving you a smooth and clean shot. To adjust the cropping in your clips, go to advanced settings and then click on Crop less <-> Smooth More Slider.

3. Analyze the effect of Warp stabilizer:

Always check the order of effects in the ‘’Effect Controls’’ folder. If you ever lost some stabilization after editing your shot, ensure not to change the Warp Stabilizer analysis source. Further, you should always re-analyze your clip after a quick color fix.

4. Nest your clips:

Sometimes we got an error message in the form of a red banner across our footage while trying to modify the speed on premiere stabilize video. Basically, we can’t use a Warp stabilizer to alter the speed of the same clip. But no worries! There is an easy fix – click on the altered clip and then click on Nest. Now, you can fix the nested sequence without any trouble.

5. Save your favorite settings as a preset:

If you’ve found a setting that gives you a happy result, you can save it as a preset for future use. In this way, you can speed up your work nicely while working with numerous shaky clips. Also, it can help if you want to make a similar effect to your multiple projects. Moreover, keep in mind that the Warp stabilizer needs to assess each clip frame by frame because it is not a one-size model that can fit all footage. Therefore, remember to click the ‘’Analyze’’ button even after putting the preset to turn it on.

Part 5: How to Stabilize Shaky Footage Without Using Warp Stabilizer?

Sometimes, the shakiness of clips is too extreme, and the Warp Stabilizer effect can’t handle it. Moreover, the filter algorithm incorrectly compensates for the camera moves. So what strategy should apply in this condition? Luckily, there is a method that can be used to stabilize your clips without using a warp stabilizer. Moreover, this process can give a hyper-realistic effect to your footage!

Step1: Import your clip into Premiere Pro Project and add it to your timeline. Hit on the “clip”, choose “Replace with After Effects Composition” to import the clip.

Step 2: Tap on the ‘’Tracker panel’’ from the right side of the screen. Scroll down to the ‘’Track Motion’’ option and open it.

Step 3: Pick the tracker marker, drag it to an area of contrasting subject and adjust it accordingly.

Tip: Remember not to make the outer box too large as After Effects can have a hard time performing the track.

Step 4: Hit the play button in the ‘’Tracker panel’’ to initiate the After Effects. Create a new ‘’Null Object’’ after the tracking process is complete.

Step 5: Move to the Tracker panel, click on “Edit Target,” choose your “Null Object” and click “OK.”

Step 6: Create a new camera and parent it to the null object for applying the stabilization effect to your clips. Enable the 3D option on both the footage layer and the null object.

Step 7: Extend your footage to compensate for any black bars that can occur as the camera pays for the shakiness. That’s it!

Conclusion:

Shaky footage is almost inescapable once you go handheld. If you don’t have a manual stabilizer like a gimbal, a tripod, or a glide cam – your work can fall victim to running, wind, walking, or other elements. In this article, we’ve introduced a quick and fast antidote for shaky footage – a Warp Stabilizer effect in the Adobe Premiere Pro. It can smooth out your shaky photos or videos with just a few clicks. So, do you know how to stabilize video premiere pro? Read out the article!

Try It Free Try It Free

Most of the photos or videos we shoot on our cameras feel shaky and a bit too jarring. Also, a camera shake is imminent when filming a video, especially while we’re zooming in to get an ideal shot. In this situation, we don’t need to go to a professional to stabilize the videos or look right. Fortunately, Adobe Premiere Pro has some valuable tools to help you take the shake out of your videos or photos, giving you stabilized and smooth footage.

The Adobe Premiere Pro is a professional video editor that can fix unwanted camera shake in just a few clicks, giving fine-tuning to the footage – exactly the feel and looks you want! So, here in this article, we’re going to describe the guideline about Adobe Premiere Pro stabilization.

In this article

01 Why Should You Stabilize Your Video?

02 What Is Warp Stabilizer?

03 How to Stabilize A Shaky Video In Premiere Pro with Warp Stabilizer?

04 Top 5 Warp Stabilizer Tips and Troubleshooting:

05 How to Stabilize Shaky Footage Without Using Warp Stabilizer?

Part 1: Why Should You Stabilize Your Video?

Being an artistic or aesthetic choice, we might love a slightly shaken photo or video. But if it looks a little more shrill or jerky, we need to smooth it out! There are many reasons you might want to fix your irregular or shaky videos.

Generally, the shaky videos are due to our unintended movements during shooting. It can make your footage look less polished, sparkle, and glossy. Moreover, it can lower your photos or videos’ overall production quality and status. Therefore, this can be extremely disturbing for the viewers, creating a sense of mistrust.

Part 2: What Is Warp Stabilizer?

Warp Stabilizer is the effect in the Adobe Premiere Pro and Adobe After Effects that can quickly smooth out your jittery footage with just a few clicks. It can save your work – fix the smaller shakes while you’re strolling or standing still. So, now you can stabilize motion by using the Warp Stabilizer effect in Adobe Premiere Pro. However, the premiere stabilization is not a substitute for all – you may require some other program for your clips as you may also observe some lost details on the edges of the footage frame. Now let’s have a look at the benefits of Warp Stabilizer!

• It’s a built-in tool in Adobe Premiere Pro, so you don’t need to install additional software or plugin.
• You can easily remove jerkiness and jitter from your footage caused by your camera movement and convert them into smooth and steady shots.
• The results are fast, quick, and automatic.

Further, there are three more parameters to consider while using a Warp stabilizer for stabilizing the shaky footage.

• Process ( an algorithm that can analyze and track the footage)
• Smoothness ( called the strength of the effect)
• Framing ( it can handle the edges of the clips)

Part 3: How to Stabilize A Shaky Video In Premiere Pro with Warp Stabilizer?

Many filmmakers or shooters rely on handheld capture as it’s a fast, cheap, and usually intimate method. But do you know how they handle shaky footage? A handy Warp stabilizer tool in Adobe Premiere Pro lets you smooth your shaky videos or photos in minutes! So, if you find yourself dealing with photos or clips with a noticeable amount of shake, stabilize video premiere is your solution! Let’s discuss the process in detail about how Warp Stabilizer work in Adobe Premiere Pro to stabilize the footage.

Step 1: Choose the video clip you want to stabilize. Add it to your timeline and move to your “Effects” workspace. Hit on the Effects panel.

Step 2: Open the “Video Effects” folder and go to the ‘’Distort’’ option. Scroll down to ‘’Warp Stabilizer’’ and double click on it. Or search warp and you will see the Warp Stabilizer option under Video Effects.

Step 3: Wait for some time until Adobe Premiere Pro analyzes your video clip for Stabilization.

Step 4: Adjust the ‘’Smoothness’’ parameter of the video clip to modify the overall amount of Stabilization.

Step 5: Choose Stabilization> Result > No motion for creating the effect of a stationary camera with zero movements or select Smooth motion for only removing the shakiness of the video. And then click on Analyze to assess your video film.

Part 4: Top 5 Warp Stabilizer Tips and Troubleshooting

Premiere Pro stabilize is a powerful tool, but it also carries some limitations. Let’s check them out!

1. Consider warp stabilize during shooting:

If you keep in mind the warp stabilizer function while filming your videos or photos, you’ll get rid of fixing problems after the work. So, if you want glossy touch in your shots with zero access to a gimbal, you should consider filming with a faster shutter speed or a wider frame. In this way, you’ll get more convenience while applying the effect in the edit.

2. Modify extra cropping in your footage:

Warp stabilizer is a tool that can provide you stable footage and crop your shot as well. It can crop out the edges of your photos or videos, giving you a smooth and clean shot. To adjust the cropping in your clips, go to advanced settings and then click on Crop less <-> Smooth More Slider.

3. Analyze the effect of Warp stabilizer:

Always check the order of effects in the ‘’Effect Controls’’ folder. If you ever lost some stabilization after editing your shot, ensure not to change the Warp Stabilizer analysis source. Further, you should always re-analyze your clip after a quick color fix.

4. Nest your clips:

Sometimes we got an error message in the form of a red banner across our footage while trying to modify the speed on premiere stabilize video. Basically, we can’t use a Warp stabilizer to alter the speed of the same clip. But no worries! There is an easy fix – click on the altered clip and then click on Nest. Now, you can fix the nested sequence without any trouble.

5. Save your favorite settings as a preset:

If you’ve found a setting that gives you a happy result, you can save it as a preset for future use. In this way, you can speed up your work nicely while working with numerous shaky clips. Also, it can help if you want to make a similar effect to your multiple projects. Moreover, keep in mind that the Warp stabilizer needs to assess each clip frame by frame because it is not a one-size model that can fit all footage. Therefore, remember to click the ‘’Analyze’’ button even after putting the preset to turn it on.

Part 5: How to Stabilize Shaky Footage Without Using Warp Stabilizer?

Sometimes, the shakiness of clips is too extreme, and the Warp Stabilizer effect can’t handle it. Moreover, the filter algorithm incorrectly compensates for the camera moves. So what strategy should apply in this condition? Luckily, there is a method that can be used to stabilize your clips without using a warp stabilizer. Moreover, this process can give a hyper-realistic effect to your footage!

Step1: Import your clip into Premiere Pro Project and add it to your timeline. Hit on the “clip”, choose “Replace with After Effects Composition” to import the clip.

Step 2: Tap on the ‘’Tracker panel’’ from the right side of the screen. Scroll down to the ‘’Track Motion’’ option and open it.

Step 3: Pick the tracker marker, drag it to an area of contrasting subject and adjust it accordingly.

Tip: Remember not to make the outer box too large as After Effects can have a hard time performing the track.

Step 4: Hit the play button in the ‘’Tracker panel’’ to initiate the After Effects. Create a new ‘’Null Object’’ after the tracking process is complete.

Step 5: Move to the Tracker panel, click on “Edit Target,” choose your “Null Object” and click “OK.”

Step 6: Create a new camera and parent it to the null object for applying the stabilization effect to your clips. Enable the 3D option on both the footage layer and the null object.

Step 7: Extend your footage to compensate for any black bars that can occur as the camera pays for the shakiness. That’s it!

Conclusion:

Shaky footage is almost inescapable once you go handheld. If you don’t have a manual stabilizer like a gimbal, a tripod, or a glide cam – your work can fall victim to running, wind, walking, or other elements. In this article, we’ve introduced a quick and fast antidote for shaky footage – a Warp Stabilizer effect in the Adobe Premiere Pro. It can smooth out your shaky photos or videos with just a few clicks. So, do you know how to stabilize video premiere pro? Read out the article!

Try It Free Try It Free

Most of the photos or videos we shoot on our cameras feel shaky and a bit too jarring. Also, a camera shake is imminent when filming a video, especially while we’re zooming in to get an ideal shot. In this situation, we don’t need to go to a professional to stabilize the videos or look right. Fortunately, Adobe Premiere Pro has some valuable tools to help you take the shake out of your videos or photos, giving you stabilized and smooth footage.

The Adobe Premiere Pro is a professional video editor that can fix unwanted camera shake in just a few clicks, giving fine-tuning to the footage – exactly the feel and looks you want! So, here in this article, we’re going to describe the guideline about Adobe Premiere Pro stabilization.

In this article

01 Why Should You Stabilize Your Video?

02 What Is Warp Stabilizer?

03 How to Stabilize A Shaky Video In Premiere Pro with Warp Stabilizer?

04 Top 5 Warp Stabilizer Tips and Troubleshooting:

05 How to Stabilize Shaky Footage Without Using Warp Stabilizer?

Part 1: Why Should You Stabilize Your Video?

Being an artistic or aesthetic choice, we might love a slightly shaken photo or video. But if it looks a little more shrill or jerky, we need to smooth it out! There are many reasons you might want to fix your irregular or shaky videos.

Generally, the shaky videos are due to our unintended movements during shooting. It can make your footage look less polished, sparkle, and glossy. Moreover, it can lower your photos or videos’ overall production quality and status. Therefore, this can be extremely disturbing for the viewers, creating a sense of mistrust.

Part 2: What Is Warp Stabilizer?

Warp Stabilizer is the effect in the Adobe Premiere Pro and Adobe After Effects that can quickly smooth out your jittery footage with just a few clicks. It can save your work – fix the smaller shakes while you’re strolling or standing still. So, now you can stabilize motion by using the Warp Stabilizer effect in Adobe Premiere Pro. However, the premiere stabilization is not a substitute for all – you may require some other program for your clips as you may also observe some lost details on the edges of the footage frame. Now let’s have a look at the benefits of Warp Stabilizer!

• It’s a built-in tool in Adobe Premiere Pro, so you don’t need to install additional software or plugin.
• You can easily remove jerkiness and jitter from your footage caused by your camera movement and convert them into smooth and steady shots.
• The results are fast, quick, and automatic.

Further, there are three more parameters to consider while using a Warp stabilizer for stabilizing the shaky footage.

• Process ( an algorithm that can analyze and track the footage)
• Smoothness ( called the strength of the effect)
• Framing ( it can handle the edges of the clips)

Part 3: How to Stabilize A Shaky Video In Premiere Pro with Warp Stabilizer?

Many filmmakers or shooters rely on handheld capture as it’s a fast, cheap, and usually intimate method. But do you know how they handle shaky footage? A handy Warp stabilizer tool in Adobe Premiere Pro lets you smooth your shaky videos or photos in minutes! So, if you find yourself dealing with photos or clips with a noticeable amount of shake, stabilize video premiere is your solution! Let’s discuss the process in detail about how Warp Stabilizer work in Adobe Premiere Pro to stabilize the footage.

Step 1: Choose the video clip you want to stabilize. Add it to your timeline and move to your “Effects” workspace. Hit on the Effects panel.

Step 2: Open the “Video Effects” folder and go to the ‘’Distort’’ option. Scroll down to ‘’Warp Stabilizer’’ and double click on it. Or search warp and you will see the Warp Stabilizer option under Video Effects.

Step 3: Wait for some time until Adobe Premiere Pro analyzes your video clip for Stabilization.

Step 4: Adjust the ‘’Smoothness’’ parameter of the video clip to modify the overall amount of Stabilization.

Step 5: Choose Stabilization> Result > No motion for creating the effect of a stationary camera with zero movements or select Smooth motion for only removing the shakiness of the video. And then click on Analyze to assess your video film.

Part 4: Top 5 Warp Stabilizer Tips and Troubleshooting

Premiere Pro stabilize is a powerful tool, but it also carries some limitations. Let’s check them out!

1. Consider warp stabilize during shooting:

If you keep in mind the warp stabilizer function while filming your videos or photos, you’ll get rid of fixing problems after the work. So, if you want glossy touch in your shots with zero access to a gimbal, you should consider filming with a faster shutter speed or a wider frame. In this way, you’ll get more convenience while applying the effect in the edit.

2. Modify extra cropping in your footage:

Warp stabilizer is a tool that can provide you stable footage and crop your shot as well. It can crop out the edges of your photos or videos, giving you a smooth and clean shot. To adjust the cropping in your clips, go to advanced settings and then click on Crop less <-> Smooth More Slider.

3. Analyze the effect of Warp stabilizer:

Always check the order of effects in the ‘’Effect Controls’’ folder. If you ever lost some stabilization after editing your shot, ensure not to change the Warp Stabilizer analysis source. Further, you should always re-analyze your clip after a quick color fix.

4. Nest your clips:

Sometimes we got an error message in the form of a red banner across our footage while trying to modify the speed on premiere stabilize video. Basically, we can’t use a Warp stabilizer to alter the speed of the same clip. But no worries! There is an easy fix – click on the altered clip and then click on Nest. Now, you can fix the nested sequence without any trouble.

5. Save your favorite settings as a preset:

If you’ve found a setting that gives you a happy result, you can save it as a preset for future use. In this way, you can speed up your work nicely while working with numerous shaky clips. Also, it can help if you want to make a similar effect to your multiple projects. Moreover, keep in mind that the Warp stabilizer needs to assess each clip frame by frame because it is not a one-size model that can fit all footage. Therefore, remember to click the ‘’Analyze’’ button even after putting the preset to turn it on.

Part 5: How to Stabilize Shaky Footage Without Using Warp Stabilizer?

Sometimes, the shakiness of clips is too extreme, and the Warp Stabilizer effect can’t handle it. Moreover, the filter algorithm incorrectly compensates for the camera moves. So what strategy should apply in this condition? Luckily, there is a method that can be used to stabilize your clips without using a warp stabilizer. Moreover, this process can give a hyper-realistic effect to your footage!

Step1: Import your clip into Premiere Pro Project and add it to your timeline. Hit on the “clip”, choose “Replace with After Effects Composition” to import the clip.

Step 2: Tap on the ‘’Tracker panel’’ from the right side of the screen. Scroll down to the ‘’Track Motion’’ option and open it.

Step 3: Pick the tracker marker, drag it to an area of contrasting subject and adjust it accordingly.

Tip: Remember not to make the outer box too large as After Effects can have a hard time performing the track.

Step 4: Hit the play button in the ‘’Tracker panel’’ to initiate the After Effects. Create a new ‘’Null Object’’ after the tracking process is complete.

Step 5: Move to the Tracker panel, click on “Edit Target,” choose your “Null Object” and click “OK.”

Step 6: Create a new camera and parent it to the null object for applying the stabilization effect to your clips. Enable the 3D option on both the footage layer and the null object.

Step 7: Extend your footage to compensate for any black bars that can occur as the camera pays for the shakiness. That’s it!

Conclusion:

Shaky footage is almost inescapable once you go handheld. If you don’t have a manual stabilizer like a gimbal, a tripod, or a glide cam – your work can fall victim to running, wind, walking, or other elements. In this article, we’ve introduced a quick and fast antidote for shaky footage – a Warp Stabilizer effect in the Adobe Premiere Pro. It can smooth out your shaky photos or videos with just a few clicks. So, do you know how to stabilize video premiere pro? Read out the article!

Also read: