Solving the Sync Problem: Audio and Video Alignment in FCPX 2024

Practical Guide: How to Sync Audio and Video in Final Cut Pro X 2024

Shanoon Cox

Mar 27, 2024• Proven solutions

Beautifully captured cinematic footage with crystal clear results and melodious audio attracts viewers and leaves an everlasting impression. However, if there is a delay in the audio and video, you need to sync audio and video clips.

Only an advanced video-editing software like Final Cut Pro X can solve this problem and get everything lined up and cohesive. Its auto-sync feature allows you to adjust audio with video and present your footage realistically and creatively. Similarly, users can create Multicam clips and include multiple clips at any given angle with the FCPX.

Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.

• Part 1: How to Fix Audio and Video Sync Issue?
• Part 2: How to Auto-sync in Final Cut Pro X?
• Part 3: How to Match Audio and Video Manually in Final Cut Pro X?
• Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Part 1: How to Fix Audio and Video Sync Issue?

Why is Audio and Video out of Sync in Final Cut Pro X?

The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.

Whenever you face an out-of-sync problem, don’t assume that the clips in your sequence are also out of sync. Multiple factors can cause sync issues, the most prominent one is by an over-taxing of the processor when it tries to run the program at its maximum. Consequently, the overstressed processer fails to sync audio and video accordingly and causes a delay.

If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.

• Set the Canvas size to “Fit Window”
• Prevent the Canvas and Viewer from overlapping
• Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
• Set the control panel resolution must be to 75A Hz or higher
• Do not select too many real-time audio tracks
• Turn off the Mirror to Desktop option
• Avoid opening multiple sequences simultaneously
• Render the video sequence to a single file.

Part 2: How to Auto-sync in Final Cut Pro X?

Final Cut Pro X is an advanced and user-friendly video editing application. Its auto-sync feature automatically analyzes the audio and video clips selected in your timeline and allows you to sync video with audio.

To use this feature, use multiple audio and video clips recorded from different resources during the same take. Once you have selected, Final Cut Pro will automatically start analyzing the clips for sync points like date of file creation, markers, audio content, and time code, etc. After analyzing the clips, the syncing process will begin in which these audio and video clips will be synced together into a new clip without affecting the original clip. Even if your clips do not have any sync points, Final Cut Pro X will sync them at their respective starting points.

Users can also use custom settings for an advanced syncing process by adjusting different parameters according to their preferences. The following section explains the manual syncing process of audio and video clips in Final Cut Pro X.

This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.

Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.

And download Filmora to have a try!

In case you may want to learn how to Edit the Beat and Sync Videos to Music.

Best Video Editing Apps to Sync Video to the Beat of a Song.

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

After you have captured beautifully cinematic footage of a beach and recorded the audio separately, it’s time to add magic. If your results are crystal clear and the audio sounds melodious, you need to sync the audio and video clips and get everything lined up and cohesive.

Follow these simple steps to sync audio and video manually with Final Cut Pro X:

• First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
• Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;

• Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;

• Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
• Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Multicam is an amazing feature of the Final Cut Pro X that allows users to sync a multiple-camera job and manage unlimited video and audio angles. You can make Multicam clips with diverse media sources and include as many clips in any given angle as you want. Make sure you have labeled your clips with a camera name or an angle to make Final Cut Pro X sync Multicam properly. You can even name all the clips shot by one camera in a single step.

Follow these steps to create Multicam clips:

• Create unique folders and put all clips from each camera in these folders separately.
• Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
• In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
• If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
• In the Event Browser, select multiple clips captured with one camera or audio recorder.
• Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
• Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
• In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
• Click the checkbox “Use Audio for Synchronization” to sync audio.

This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.

Conclusion

Final Cut Pro X is a professional video editing software used by both beginners and experienced photographers to create magic in their videos. Powered by several amazing features and advanced video-editing options, the application features a trackless magnetic timeline and supports compound clips.

Sometimes, an over-taxing of the processor may cause a delay in the video edited by Final Cut Pro X. Hence, the audio and video are out of sync that declines the video quality. To solve this problem, Apple Inc. introduced an auto-sync feature in FCPX which automatically analyzes and synchronizes the audio and video clips. You can also match audio and video manually by selecting any two clips and selecting the Synchronize Clips option.

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Beautifully captured cinematic footage with crystal clear results and melodious audio attracts viewers and leaves an everlasting impression. However, if there is a delay in the audio and video, you need to sync audio and video clips.

Only an advanced video-editing software like Final Cut Pro X can solve this problem and get everything lined up and cohesive. Its auto-sync feature allows you to adjust audio with video and present your footage realistically and creatively. Similarly, users can create Multicam clips and include multiple clips at any given angle with the FCPX.

Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.

• Part 1: How to Fix Audio and Video Sync Issue?
• Part 2: How to Auto-sync in Final Cut Pro X?
• Part 3: How to Match Audio and Video Manually in Final Cut Pro X?
• Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Part 1: How to Fix Audio and Video Sync Issue?

Why is Audio and Video out of Sync in Final Cut Pro X?

The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.

Whenever you face an out-of-sync problem, don’t assume that the clips in your sequence are also out of sync. Multiple factors can cause sync issues, the most prominent one is by an over-taxing of the processor when it tries to run the program at its maximum. Consequently, the overstressed processer fails to sync audio and video accordingly and causes a delay.

If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.

• Set the Canvas size to “Fit Window”
• Prevent the Canvas and Viewer from overlapping
• Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
• Set the control panel resolution must be to 75A Hz or higher
• Do not select too many real-time audio tracks
• Turn off the Mirror to Desktop option
• Avoid opening multiple sequences simultaneously
• Render the video sequence to a single file.

Part 2: How to Auto-sync in Final Cut Pro X?

Final Cut Pro X is an advanced and user-friendly video editing application. Its auto-sync feature automatically analyzes the audio and video clips selected in your timeline and allows you to sync video with audio.

To use this feature, use multiple audio and video clips recorded from different resources during the same take. Once you have selected, Final Cut Pro will automatically start analyzing the clips for sync points like date of file creation, markers, audio content, and time code, etc. After analyzing the clips, the syncing process will begin in which these audio and video clips will be synced together into a new clip without affecting the original clip. Even if your clips do not have any sync points, Final Cut Pro X will sync them at their respective starting points.

Users can also use custom settings for an advanced syncing process by adjusting different parameters according to their preferences. The following section explains the manual syncing process of audio and video clips in Final Cut Pro X.

This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.

Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.

And download Filmora to have a try!

In case you may want to learn how to Edit the Beat and Sync Videos to Music.

Best Video Editing Apps to Sync Video to the Beat of a Song.

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

After you have captured beautifully cinematic footage of a beach and recorded the audio separately, it’s time to add magic. If your results are crystal clear and the audio sounds melodious, you need to sync the audio and video clips and get everything lined up and cohesive.

Follow these simple steps to sync audio and video manually with Final Cut Pro X:

• First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
• Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;

• Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;

• Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
• Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Multicam is an amazing feature of the Final Cut Pro X that allows users to sync a multiple-camera job and manage unlimited video and audio angles. You can make Multicam clips with diverse media sources and include as many clips in any given angle as you want. Make sure you have labeled your clips with a camera name or an angle to make Final Cut Pro X sync Multicam properly. You can even name all the clips shot by one camera in a single step.

Follow these steps to create Multicam clips:

• Create unique folders and put all clips from each camera in these folders separately.
• Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
• In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
• If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
• In the Event Browser, select multiple clips captured with one camera or audio recorder.
• Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
• Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
• In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
• Click the checkbox “Use Audio for Synchronization” to sync audio.

This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.

Conclusion

Final Cut Pro X is a professional video editing software used by both beginners and experienced photographers to create magic in their videos. Powered by several amazing features and advanced video-editing options, the application features a trackless magnetic timeline and supports compound clips.

Sometimes, an over-taxing of the processor may cause a delay in the video edited by Final Cut Pro X. Hence, the audio and video are out of sync that declines the video quality. To solve this problem, Apple Inc. introduced an auto-sync feature in FCPX which automatically analyzes and synchronizes the audio and video clips. You can also match audio and video manually by selecting any two clips and selecting the Synchronize Clips option.

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Beautifully captured cinematic footage with crystal clear results and melodious audio attracts viewers and leaves an everlasting impression. However, if there is a delay in the audio and video, you need to sync audio and video clips.

Only an advanced video-editing software like Final Cut Pro X can solve this problem and get everything lined up and cohesive. Its auto-sync feature allows you to adjust audio with video and present your footage realistically and creatively. Similarly, users can create Multicam clips and include multiple clips at any given angle with the FCPX.

Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.

• Part 1: How to Fix Audio and Video Sync Issue?
• Part 2: How to Auto-sync in Final Cut Pro X?
• Part 3: How to Match Audio and Video Manually in Final Cut Pro X?
• Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Part 1: How to Fix Audio and Video Sync Issue?

Why is Audio and Video out of Sync in Final Cut Pro X?

The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.

Whenever you face an out-of-sync problem, don’t assume that the clips in your sequence are also out of sync. Multiple factors can cause sync issues, the most prominent one is by an over-taxing of the processor when it tries to run the program at its maximum. Consequently, the overstressed processer fails to sync audio and video accordingly and causes a delay.

If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.

• Set the Canvas size to “Fit Window”
• Prevent the Canvas and Viewer from overlapping
• Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
• Set the control panel resolution must be to 75A Hz or higher
• Do not select too many real-time audio tracks
• Turn off the Mirror to Desktop option
• Avoid opening multiple sequences simultaneously
• Render the video sequence to a single file.

Part 2: How to Auto-sync in Final Cut Pro X?

Final Cut Pro X is an advanced and user-friendly video editing application. Its auto-sync feature automatically analyzes the audio and video clips selected in your timeline and allows you to sync video with audio.

To use this feature, use multiple audio and video clips recorded from different resources during the same take. Once you have selected, Final Cut Pro will automatically start analyzing the clips for sync points like date of file creation, markers, audio content, and time code, etc. After analyzing the clips, the syncing process will begin in which these audio and video clips will be synced together into a new clip without affecting the original clip. Even if your clips do not have any sync points, Final Cut Pro X will sync them at their respective starting points.

Users can also use custom settings for an advanced syncing process by adjusting different parameters according to their preferences. The following section explains the manual syncing process of audio and video clips in Final Cut Pro X.

This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.

Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.

And download Filmora to have a try!

In case you may want to learn how to Edit the Beat and Sync Videos to Music.

Best Video Editing Apps to Sync Video to the Beat of a Song.

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

After you have captured beautifully cinematic footage of a beach and recorded the audio separately, it’s time to add magic. If your results are crystal clear and the audio sounds melodious, you need to sync the audio and video clips and get everything lined up and cohesive.

Follow these simple steps to sync audio and video manually with Final Cut Pro X:

• First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
• Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;

• Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;

• Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
• Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Multicam is an amazing feature of the Final Cut Pro X that allows users to sync a multiple-camera job and manage unlimited video and audio angles. You can make Multicam clips with diverse media sources and include as many clips in any given angle as you want. Make sure you have labeled your clips with a camera name or an angle to make Final Cut Pro X sync Multicam properly. You can even name all the clips shot by one camera in a single step.

Follow these steps to create Multicam clips:

• Create unique folders and put all clips from each camera in these folders separately.
• Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
• In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
• If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
• In the Event Browser, select multiple clips captured with one camera or audio recorder.
• Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
• Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
• In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
• Click the checkbox “Use Audio for Synchronization” to sync audio.

This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.

Conclusion

Final Cut Pro X is a professional video editing software used by both beginners and experienced photographers to create magic in their videos. Powered by several amazing features and advanced video-editing options, the application features a trackless magnetic timeline and supports compound clips.

Sometimes, an over-taxing of the processor may cause a delay in the video edited by Final Cut Pro X. Hence, the audio and video are out of sync that declines the video quality. To solve this problem, Apple Inc. introduced an auto-sync feature in FCPX which automatically analyzes and synchronizes the audio and video clips. You can also match audio and video manually by selecting any two clips and selecting the Synchronize Clips option.

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Beautifully captured cinematic footage with crystal clear results and melodious audio attracts viewers and leaves an everlasting impression. However, if there is a delay in the audio and video, you need to sync audio and video clips.

Only an advanced video-editing software like Final Cut Pro X can solve this problem and get everything lined up and cohesive. Its auto-sync feature allows you to adjust audio with video and present your footage realistically and creatively. Similarly, users can create Multicam clips and include multiple clips at any given angle with the FCPX.

Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.

• Part 1: How to Fix Audio and Video Sync Issue?
• Part 2: How to Auto-sync in Final Cut Pro X?
• Part 3: How to Match Audio and Video Manually in Final Cut Pro X?
• Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Part 1: How to Fix Audio and Video Sync Issue?

Why is Audio and Video out of Sync in Final Cut Pro X?

The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.

Whenever you face an out-of-sync problem, don’t assume that the clips in your sequence are also out of sync. Multiple factors can cause sync issues, the most prominent one is by an over-taxing of the processor when it tries to run the program at its maximum. Consequently, the overstressed processer fails to sync audio and video accordingly and causes a delay.

If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.

• Set the Canvas size to “Fit Window”
• Prevent the Canvas and Viewer from overlapping
• Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
• Set the control panel resolution must be to 75A Hz or higher
• Do not select too many real-time audio tracks
• Turn off the Mirror to Desktop option
• Avoid opening multiple sequences simultaneously
• Render the video sequence to a single file.

Part 2: How to Auto-sync in Final Cut Pro X?

Final Cut Pro X is an advanced and user-friendly video editing application. Its auto-sync feature automatically analyzes the audio and video clips selected in your timeline and allows you to sync video with audio.

To use this feature, use multiple audio and video clips recorded from different resources during the same take. Once you have selected, Final Cut Pro will automatically start analyzing the clips for sync points like date of file creation, markers, audio content, and time code, etc. After analyzing the clips, the syncing process will begin in which these audio and video clips will be synced together into a new clip without affecting the original clip. Even if your clips do not have any sync points, Final Cut Pro X will sync them at their respective starting points.

Users can also use custom settings for an advanced syncing process by adjusting different parameters according to their preferences. The following section explains the manual syncing process of audio and video clips in Final Cut Pro X.

This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.

Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.

And download Filmora to have a try!

In case you may want to learn how to Edit the Beat and Sync Videos to Music.

Best Video Editing Apps to Sync Video to the Beat of a Song.

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

After you have captured beautifully cinematic footage of a beach and recorded the audio separately, it’s time to add magic. If your results are crystal clear and the audio sounds melodious, you need to sync the audio and video clips and get everything lined up and cohesive.

Follow these simple steps to sync audio and video manually with Final Cut Pro X:

• First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
• Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;

• Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;

• Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
• Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Multicam is an amazing feature of the Final Cut Pro X that allows users to sync a multiple-camera job and manage unlimited video and audio angles. You can make Multicam clips with diverse media sources and include as many clips in any given angle as you want. Make sure you have labeled your clips with a camera name or an angle to make Final Cut Pro X sync Multicam properly. You can even name all the clips shot by one camera in a single step.

Follow these steps to create Multicam clips:

• Create unique folders and put all clips from each camera in these folders separately.
• Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
• In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
• If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
• In the Event Browser, select multiple clips captured with one camera or audio recorder.
• Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
• Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
• In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
• Click the checkbox “Use Audio for Synchronization” to sync audio.

This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.

Conclusion

Final Cut Pro X is a professional video editing software used by both beginners and experienced photographers to create magic in their videos. Powered by several amazing features and advanced video-editing options, the application features a trackless magnetic timeline and supports compound clips.

Sometimes, an over-taxing of the processor may cause a delay in the video edited by Final Cut Pro X. Hence, the audio and video are out of sync that declines the video quality. To solve this problem, Apple Inc. introduced an auto-sync feature in FCPX which automatically analyzes and synchronizes the audio and video clips. You can also match audio and video manually by selecting any two clips and selecting the Synchronize Clips option.

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

The Best Speech to Text Apps on Mac You Might Miss [Free & No Download]

Do you struggle to meet deadlines for your text assignments? If you do, then you are in luck. Speech recognition technology is the best way to beat this challenge. Whether you are a student or a corporate professional, several speech-to-text apps can be used to guarantee that you meet your deadlines. For example, Mac owners can use dragon for Mac to complete typing assignments in half the time.

Below are the best speech-to-text apps on Mac you might have missed since the beginning of 2022. Some of the apps in the list are in-built into your device, while others may require you to download additional software. Regardless, all of those listed below are free to use on your Mac device. Keep reading to find out more.

Part1: Top 1 Built-in Mac Dictation Feature

Did you know your Mac device comes with a built-in speech-to-text feature? So whether you use a laptop or desktop, you can generate text from your voice through your device’s microphone. Officially known as Dictation, the app allows you to transcribe text anywhere you can type it. So, for example, you can use Apple Dictation for your messaging and word processing apps.

The feature has been available since macOS Sierra as a free built-in feature. Earlier versions of Apple Dictation relied on its voice recognition software. However, it now relies on Siri for users of macOS Catalina onwards.

Typically, the app allows you to transcribe thirty seconds and below of audio. However, you can enable Enhanced dictation for longer transcription times. According to most users, the app is suitable for getting the first draft of your assignment, which you can manually edit later.

Follow these steps to enable Apple Dictation on your Mac:

1. Tap the Apple logo on the top-left toolbar of your screen and select System Preferences from the resulting menu.
2. Click on the Keyboard option from the system preferences screen.
3. Once there, click on the Dictation option located at the top of the menu.
4. Select On to activate the app in its default mode. In addition, you can check the Use Enhanced Dictation box to enable additional functions such as offline use and text commands like bold and italics.
5. Finally, select your language from the dropdown menu and choose a shortcut key.

Please note that you need to speak your punctuation loudly when using Apple Dictation. Otherwise, the app will consider them as regular words.

Part2: Top 2 Microsoft Word [Free & No Download]

Another option to consider is speech-to-text Microsoft Word Mac. The app is free to use and relies on Microsoft Azure Speech Services to transcribe text. Below are the requirements to use speech-to-text word mac.

• An external microphone for your Mac desktop, or you can use your built-in microphone for your MacBook. This is because speech-to-text on Microsoft word mac only allows input with a microphone rather than an audio file upload.
• An active Office 365 subscription. Please note you need to log in to your account for the app to function.
• Insider builds 16.32 (19120802) and above.
• An active internet connection.

Once you have everything set up, follow these steps to use speech-to-text on Word.

1. Launch Microsoft Word from your desktop.
2. Click on the Dictate button from the top menu of your Word document, and wait for the red dot to appear. The button features a microphone for easy identification.
3. Once the dot appears, start speaking to transcribe your text. Ensure you are in a quiet environment for the best results. In addition, speak louder when transcribing punctuations.
4. Click on the Dictate button to finish the transcription.

Part3: Top 3 Google docs

Google Docs is arguably the market’s most accurate free speech-to-text service. In addition, it allows you to transcribe your voice to text and format documents with your voice. However, you can only use the service through the Chrome browser.

Follow these steps to activate Google Docs voice typing on your Mac device:

1. Launch the Chrome browser on your macOS and select Docs from the app menu. Please note you will need an active Google account to use the service.
2. Open a new document and click on the Tools tab from the top menu.
3. Select Voice Typing from the menu to access speech-to-text on Google Docs.
4. Tap the microphone to start transcribing, and tap it again to finish.

Google Docs speech-to-text is available in 71 languages. In addition, it supports simple commands such as ‘create a bulleted list,’ which are unavailable on other speech-to-text apps. As such, it is one of the market’s most popular voice typing apps.

Part4: Top 4 Filmora

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Adding subtitles to your videos can be incredibly time-consuming if you do not have the right tools. However, with Filmora’s speech-to-text function, you can add subtitles to your video with a single click. In addition, it automatically recognizes audio in your videos and transcribes it to text with incredible accuracy. The plugin uses state-of-the-art algorithms to ensure the video industry’s most accurate speech technology.

Furthermore, you can import external files to your video’s timeline and edit them as you please. For example, you can import a video from your thumb drive and use the Filmora speech-to-text plugin to transcribe to text. Currently, the plugin can transcribe the text in 26 languages. As such, it is a favorite for vloggers, teachers, and film editors, who all have to deliver their content with great efficiency.

Please note that you must have Filmora installed on your Mac device to access the Speech to Text plugin. In addition, check if your Filmora version is compatible with the plugin before downloading. Once you confirm that you meet all the requirements, here is how to use the service:

• Launch the Filmora app on your Mac and open a new video workspace.
• Click on the microphone symbol at the bottom right corner of the page to start recording. Tap it once again to finish the recording.
• Tap the Tools tab on your main menu and select Speech to Text. Then, confirm your preferences and wait for the transcription.

Part5: Top 5 Dragon for Mac

Dragon Dictate is arguably the best dictation software currently on the market. According to most users, its accuracy and feature sets are next to none. For example, the Smart Format Rules learn how you represent dates, numbers, and abbreviations, resulting in less editing work for you. The Dragon Dictate app is free to download from the Apple Store.

Dragon for Mac users reports a dictation accuracy of nearly 99%, which is excellent in the speech-to-text software category. All of Nuance’s Dragon products use deep learning technology to capture your accent and cadence. As such, the app gets better at transcribing your text as you continue using it. In addition, dragon for Mac professional allows you to transcribe audio clips from uploaded files. For example, you can import audio from your iPhone to your Dragon Dictate workspace and transcribe it hassle-free.

Unfortunately, you cannot get a stand-alone dragon app for Mac. This is because Nuance discontinued its development in 2018. In addition, Microsoft’s acquisition of the company in 2021 proves that the decision is permanent. However, you can still use the Windows version of Dragon through Parallels, which allows you to run macOS and Windows simultaneously. In addition, this method also works for M1 Macs.

Part6: FAQs

Is there a difference between voice recognition and speech-to-text?

Voice recognition software allows your device to capture your accent and tone and then stores that data for different functions, such as user logins and speech-to-text functionality. For example, Siri will ask you to repeat a sentence several times as one of the setup steps.

Which is the best external device for the speech-to-text service?

Most users report better speech-to-text accuracy when using headsets compared to using an external microphone. This is because the microphone is much closer to your mouth, so your voice is less affected by external noise.

Can speech-to-text apps automatically translate a transcribed text?

Yes, they can. Apps such as Google’s Speech to Text include a translation feature in their functionality. However, you will need the Google Chrome browser to access Speech to text. This is because the service is only available to active google account holders.

How much faster is speech to text faster than typing?

A 2017 Stanford study states that speech to text is aboutthree times faster than typing . In addition, it found that speech-to-text apps can transcribe over 150 words per minute, while professional transcriptionists range between 50 to 80 words per minute.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

Adding subtitles to your videos can be incredibly time-consuming if you do not have the right tools. However, with Filmora’s speech-to-text function, you can add subtitles to your video with a single click. In addition, it automatically recognizes audio in your videos and transcribes it to text with incredible accuracy. The plugin uses state-of-the-art algorithms to ensure the video industry’s most accurate speech technology.

Furthermore, you can import external files to your video’s timeline and edit them as you please. For example, you can import a video from your thumb drive and use the Filmora speech-to-text plugin to transcribe to text. Currently, the plugin can transcribe the text in 26 languages. As such, it is a favorite for vloggers, teachers, and film editors, who all have to deliver their content with great efficiency.

Please note that you must have Filmora installed on your Mac device to access the Speech to Text plugin. In addition, check if your Filmora version is compatible with the plugin before downloading. Once you confirm that you meet all the requirements, here is how to use the service:

• Launch the Filmora app on your Mac and open a new video workspace.
• Click on the microphone symbol at the bottom right corner of the page to start recording. Tap it once again to finish the recording.
• Tap the Tools tab on your main menu and select Speech to Text. Then, confirm your preferences and wait for the transcription.

Part5: Top 5 Dragon for Mac

Dragon Dictate is arguably the best dictation software currently on the market. According to most users, its accuracy and feature sets are next to none. For example, the Smart Format Rules learn how you represent dates, numbers, and abbreviations, resulting in less editing work for you. The Dragon Dictate app is free to download from the Apple Store.

Dragon for Mac users reports a dictation accuracy of nearly 99%, which is excellent in the speech-to-text software category. All of Nuance’s Dragon products use deep learning technology to capture your accent and cadence. As such, the app gets better at transcribing your text as you continue using it. In addition, dragon for Mac professional allows you to transcribe audio clips from uploaded files. For example, you can import audio from your iPhone to your Dragon Dictate workspace and transcribe it hassle-free.

Unfortunately, you cannot get a stand-alone dragon app for Mac. This is because Nuance discontinued its development in 2018. In addition, Microsoft’s acquisition of the company in 2021 proves that the decision is permanent. However, you can still use the Windows version of Dragon through Parallels, which allows you to run macOS and Windows simultaneously. In addition, this method also works for M1 Macs.

Part6: FAQs

Is there a difference between voice recognition and speech-to-text?

Voice recognition software allows your device to capture your accent and tone and then stores that data for different functions, such as user logins and speech-to-text functionality. For example, Siri will ask you to repeat a sentence several times as one of the setup steps.

Which is the best external device for the speech-to-text service?

Most users report better speech-to-text accuracy when using headsets compared to using an external microphone. This is because the microphone is much closer to your mouth, so your voice is less affected by external noise.

Can speech-to-text apps automatically translate a transcribed text?

Yes, they can. Apps such as Google’s Speech to Text include a translation feature in their functionality. However, you will need the Google Chrome browser to access Speech to text. This is because the service is only available to active google account holders.

How much faster is speech to text faster than typing?

A 2017 Stanford study states that speech to text is aboutthree times faster than typing . In addition, it found that speech-to-text apps can transcribe over 150 words per minute, while professional transcriptionists range between 50 to 80 words per minute.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Mastering Video Editing on Mac: Fast and Easy Techniques for Cutting Large Files

Easily Cut Large Videos Faster on Mac

Liza Brown

Oct 26, 2023• Proven solutions

Recording and cutting unnecessary scenes from a large video is a daily task in video editing. When users require cutting large videos, they are often found researching questions like “how can I edit videos faster?”, “what are the methods to edit large videos without losing their quality?”, “how much time does large video editing takes?” on different forums.

Understanding the importance of this issue, we decided to elaborate on how to edit large videos faster and lossless by introducing some of the best video editing tools in this article. Before we delve into the software tools, let’s first understand the basics of video limits that video editors can handle, ensuring its quality.

• Section1. What Size Video Can an Ordinary Video Editor Handle?
• Section2. Which Software Can Handle Large Videos?

Section 1. What Size Video Can an Ordinary Video Editor Handle?

Videos recorded with iPad, iPhone, or any other iOS device can be larger than individuals expect. If your video limit exceeds your desired social media platform’s size limitations, you can opt for video compression using the editing software tools to meet the standards of the required social platform.

1. For cutting Small or Middle Video Size - Online Editor

Video size limitations vary in every online video editor. Since these are free video editing tools available online, therefore they have restrictions and limitations to edit, download, and export videos. However, they are effective in terms of editing as they maintain the quality of the edited videos.

On the other hand, there are several with different video size limits such ranging from 100MB to 1GB.

2. For Cutting Large Video Size - Video Editing Software

Video editing software tools are unlike online editors. They have no limited video size

requirements and come with multiple inputs and output formats for video editing with several built-in features.

These video editors guarantee exceptional editing without declining the quality of the original video. Individuals can edit large videos faster and easier. In addition, software editing tools will be more advantageous for quick and high-quality video editing.

Section 2. Which Software Can Handle Large Videos?

One common way to handle large videos is to compress or downsize them. If you are facing difficulty in transferring, uploading, and editing the HD video files you’ve shot, you require an introduction to high-quality video editing software tools that can let you edit the video hassle-free on Mac.

1. Filmora X

Being one of the most popular freemium video editing software tools for both Mac and Windows, Filmora X can edit high quality up to 4k video footage, you can cut large video on this software easily. It features a variety of professional video tools, effects, and transitions that can be easily found on its user-friendly interface. Upon editing, users can select from the multiple options to save the video which can be directly shared on famous social media platforms.

Similarly, video compression is easy through Filmora X following the below steps:

• Click on the “New Project” to begin with the compression
• Import the video by clicking on the option on the top left corner

• Carry out any of the four experiments to compress the file including cropping the video screen, shredding the video length, tailoring the video resolution, or converting the video file format to MP3

PROS:

1. Simple to use, great for Mac and Windows users
2. Easy application of elements, overlays, and filters
3. Supports multiple input formats and many export options
4. Has over 400+ different transition effects
5. Contains built-in music and sound effect
6. Stylish text title editor (basic and advance edit)
7. Affordable perpetual license price

CONS:

1. The color grading tool is limited
2. No freehand masking tool

2. Adobe Premiere Pro

Adobe Premiere Pro is one of the HD editing tools for all Mac and Windows Users. Providing a professional video production solution from the beginning to the end facilitates users with a wide range of editing tools. The creative tools and integration of this application assist you to make footage into polished videos and films.

Having said that, Adobe Premiere Pro has a simple process to reduce the video file size so that it is easier for you to upload on the required platform. Follow the below steps to compress your video on the application.

• Import the footage and add it to the timeline
• Open the export settings and reduce the size
• Click export to compress the video if everything looks acceptable

PROS:

1. Correct and convenient work with all Windows and macOS devices
2. High-quality video and audio editing
3. Supported by a variety of formats such as HDV, HD, and Flash video
4. Built-in non-linear video editing
5. Video content editing in real-time

CONS:

1. Works for free only for 30 days
2. Quite resource-intensive system requirements

Video editing has become a simplified procedure with several features and options available. Whether it is about changing formats, reducing video size limits, or speeding up the video, everything is possible utilizing these advanced tools.

If you are confused about choosing the most suitable video editing tool, Wondershare Filmora X is an excellent Mac video editor that can meet both basic and advanced needs. The sense detection function lets you cut the large video easily. Download it today and experience the high-quality editing yourself before choosing any other pricey video editor.

Learn More: Tips for Shortening Video Length

An Alternative Way to Cut Large Videos Faster on Mac with Adobe Premiere Pro

Adobe Premiere Pro is the most used video editing software in all around the world. It can endure very large files and provide a great experience for video editors, facilitating every aspect of video editing. The software works on both Mac and Windows. In case we have large files, we usually turn to Adobe Premiere Pro, so, one of the most important things to do might be to cut large videos faster there. Actually, it is something not at all difficult – the steps are as follows: first, you need to import your footage and add it to the sequence (referred also as timeline, to the long horizontal window below);

then, you don’t need to do anything there, just open the export settings (the shortcut for which would be ctrl+m),

and reduce the size;

and finally, you need to click on export button to compress the video if this is already the result that you needed.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Recording and cutting unnecessary scenes from a large video is a daily task in video editing. When users require cutting large videos, they are often found researching questions like “how can I edit videos faster?”, “what are the methods to edit large videos without losing their quality?”, “how much time does large video editing takes?” on different forums.

Understanding the importance of this issue, we decided to elaborate on how to edit large videos faster and lossless by introducing some of the best video editing tools in this article. Before we delve into the software tools, let’s first understand the basics of video limits that video editors can handle, ensuring its quality.

• Section1. What Size Video Can an Ordinary Video Editor Handle?
• Section2. Which Software Can Handle Large Videos?

Section 1. What Size Video Can an Ordinary Video Editor Handle?

Videos recorded with iPad, iPhone, or any other iOS device can be larger than individuals expect. If your video limit exceeds your desired social media platform’s size limitations, you can opt for video compression using the editing software tools to meet the standards of the required social platform.

1. For cutting Small or Middle Video Size - Online Editor

Video size limitations vary in every online video editor. Since these are free video editing tools available online, therefore they have restrictions and limitations to edit, download, and export videos. However, they are effective in terms of editing as they maintain the quality of the edited videos.

On the other hand, there are several with different video size limits such ranging from 100MB to 1GB.

2. For Cutting Large Video Size - Video Editing Software

Video editing software tools are unlike online editors. They have no limited video size

requirements and come with multiple inputs and output formats for video editing with several built-in features.

These video editors guarantee exceptional editing without declining the quality of the original video. Individuals can edit large videos faster and easier. In addition, software editing tools will be more advantageous for quick and high-quality video editing.

Section 2. Which Software Can Handle Large Videos?

One common way to handle large videos is to compress or downsize them. If you are facing difficulty in transferring, uploading, and editing the HD video files you’ve shot, you require an introduction to high-quality video editing software tools that can let you edit the video hassle-free on Mac.

1. Filmora X

Being one of the most popular freemium video editing software tools for both Mac and Windows, Filmora X can edit high quality up to 4k video footage, you can cut large video on this software easily. It features a variety of professional video tools, effects, and transitions that can be easily found on its user-friendly interface. Upon editing, users can select from the multiple options to save the video which can be directly shared on famous social media platforms.

Similarly, video compression is easy through Filmora X following the below steps:

• Click on the “New Project” to begin with the compression
• Import the video by clicking on the option on the top left corner

• Carry out any of the four experiments to compress the file including cropping the video screen, shredding the video length, tailoring the video resolution, or converting the video file format to MP3

PROS:

1. Simple to use, great for Mac and Windows users
2. Easy application of elements, overlays, and filters
3. Supports multiple input formats and many export options
4. Has over 400+ different transition effects
5. Contains built-in music and sound effect
6. Stylish text title editor (basic and advance edit)
7. Affordable perpetual license price

CONS:

1. The color grading tool is limited
2. No freehand masking tool

2. Adobe Premiere Pro

Adobe Premiere Pro is one of the HD editing tools for all Mac and Windows Users. Providing a professional video production solution from the beginning to the end facilitates users with a wide range of editing tools. The creative tools and integration of this application assist you to make footage into polished videos and films.

Having said that, Adobe Premiere Pro has a simple process to reduce the video file size so that it is easier for you to upload on the required platform. Follow the below steps to compress your video on the application.

• Import the footage and add it to the timeline
• Open the export settings and reduce the size
• Click export to compress the video if everything looks acceptable

PROS:

1. Correct and convenient work with all Windows and macOS devices
2. High-quality video and audio editing
3. Supported by a variety of formats such as HDV, HD, and Flash video
4. Built-in non-linear video editing
5. Video content editing in real-time

CONS:

1. Works for free only for 30 days
2. Quite resource-intensive system requirements

Video editing has become a simplified procedure with several features and options available. Whether it is about changing formats, reducing video size limits, or speeding up the video, everything is possible utilizing these advanced tools.

If you are confused about choosing the most suitable video editing tool, Wondershare Filmora X is an excellent Mac video editor that can meet both basic and advanced needs. The sense detection function lets you cut the large video easily. Download it today and experience the high-quality editing yourself before choosing any other pricey video editor.

Learn More: Tips for Shortening Video Length

An Alternative Way to Cut Large Videos Faster on Mac with Adobe Premiere Pro

Adobe Premiere Pro is the most used video editing software in all around the world. It can endure very large files and provide a great experience for video editors, facilitating every aspect of video editing. The software works on both Mac and Windows. In case we have large files, we usually turn to Adobe Premiere Pro, so, one of the most important things to do might be to cut large videos faster there. Actually, it is something not at all difficult – the steps are as follows: first, you need to import your footage and add it to the sequence (referred also as timeline, to the long horizontal window below);

then, you don’t need to do anything there, just open the export settings (the shortcut for which would be ctrl+m),

and reduce the size;

and finally, you need to click on export button to compress the video if this is already the result that you needed.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Recording and cutting unnecessary scenes from a large video is a daily task in video editing. When users require cutting large videos, they are often found researching questions like “how can I edit videos faster?”, “what are the methods to edit large videos without losing their quality?”, “how much time does large video editing takes?” on different forums.

Understanding the importance of this issue, we decided to elaborate on how to edit large videos faster and lossless by introducing some of the best video editing tools in this article. Before we delve into the software tools, let’s first understand the basics of video limits that video editors can handle, ensuring its quality.

• Section1. What Size Video Can an Ordinary Video Editor Handle?
• Section2. Which Software Can Handle Large Videos?

Section 1. What Size Video Can an Ordinary Video Editor Handle?

Videos recorded with iPad, iPhone, or any other iOS device can be larger than individuals expect. If your video limit exceeds your desired social media platform’s size limitations, you can opt for video compression using the editing software tools to meet the standards of the required social platform.

1. For cutting Small or Middle Video Size - Online Editor

Video size limitations vary in every online video editor. Since these are free video editing tools available online, therefore they have restrictions and limitations to edit, download, and export videos. However, they are effective in terms of editing as they maintain the quality of the edited videos.

On the other hand, there are several with different video size limits such ranging from 100MB to 1GB.

2. For Cutting Large Video Size - Video Editing Software

Video editing software tools are unlike online editors. They have no limited video size

requirements and come with multiple inputs and output formats for video editing with several built-in features.

These video editors guarantee exceptional editing without declining the quality of the original video. Individuals can edit large videos faster and easier. In addition, software editing tools will be more advantageous for quick and high-quality video editing.

Section 2. Which Software Can Handle Large Videos?

One common way to handle large videos is to compress or downsize them. If you are facing difficulty in transferring, uploading, and editing the HD video files you’ve shot, you require an introduction to high-quality video editing software tools that can let you edit the video hassle-free on Mac.

1. Filmora X

Being one of the most popular freemium video editing software tools for both Mac and Windows, Filmora X can edit high quality up to 4k video footage, you can cut large video on this software easily. It features a variety of professional video tools, effects, and transitions that can be easily found on its user-friendly interface. Upon editing, users can select from the multiple options to save the video which can be directly shared on famous social media platforms.

Similarly, video compression is easy through Filmora X following the below steps:

• Click on the “New Project” to begin with the compression
• Import the video by clicking on the option on the top left corner

• Carry out any of the four experiments to compress the file including cropping the video screen, shredding the video length, tailoring the video resolution, or converting the video file format to MP3

PROS:

1. Simple to use, great for Mac and Windows users
2. Easy application of elements, overlays, and filters
3. Supports multiple input formats and many export options
4. Has over 400+ different transition effects
5. Contains built-in music and sound effect
6. Stylish text title editor (basic and advance edit)
7. Affordable perpetual license price

CONS:

1. The color grading tool is limited
2. No freehand masking tool

2. Adobe Premiere Pro

Adobe Premiere Pro is one of the HD editing tools for all Mac and Windows Users. Providing a professional video production solution from the beginning to the end facilitates users with a wide range of editing tools. The creative tools and integration of this application assist you to make footage into polished videos and films.

Having said that, Adobe Premiere Pro has a simple process to reduce the video file size so that it is easier for you to upload on the required platform. Follow the below steps to compress your video on the application.

• Import the footage and add it to the timeline
• Open the export settings and reduce the size
• Click export to compress the video if everything looks acceptable

PROS:

1. Correct and convenient work with all Windows and macOS devices
2. High-quality video and audio editing
3. Supported by a variety of formats such as HDV, HD, and Flash video
4. Built-in non-linear video editing
5. Video content editing in real-time

CONS:

1. Works for free only for 30 days
2. Quite resource-intensive system requirements

Video editing has become a simplified procedure with several features and options available. Whether it is about changing formats, reducing video size limits, or speeding up the video, everything is possible utilizing these advanced tools.

If you are confused about choosing the most suitable video editing tool, Wondershare Filmora X is an excellent Mac video editor that can meet both basic and advanced needs. The sense detection function lets you cut the large video easily. Download it today and experience the high-quality editing yourself before choosing any other pricey video editor.

Learn More: Tips for Shortening Video Length

An Alternative Way to Cut Large Videos Faster on Mac with Adobe Premiere Pro

Adobe Premiere Pro is the most used video editing software in all around the world. It can endure very large files and provide a great experience for video editors, facilitating every aspect of video editing. The software works on both Mac and Windows. In case we have large files, we usually turn to Adobe Premiere Pro, so, one of the most important things to do might be to cut large videos faster there. Actually, it is something not at all difficult – the steps are as follows: first, you need to import your footage and add it to the sequence (referred also as timeline, to the long horizontal window below);

then, you don’t need to do anything there, just open the export settings (the shortcut for which would be ctrl+m),

and reduce the size;

and finally, you need to click on export button to compress the video if this is already the result that you needed.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Recording and cutting unnecessary scenes from a large video is a daily task in video editing. When users require cutting large videos, they are often found researching questions like “how can I edit videos faster?”, “what are the methods to edit large videos without losing their quality?”, “how much time does large video editing takes?” on different forums.

Understanding the importance of this issue, we decided to elaborate on how to edit large videos faster and lossless by introducing some of the best video editing tools in this article. Before we delve into the software tools, let’s first understand the basics of video limits that video editors can handle, ensuring its quality.

• Section1. What Size Video Can an Ordinary Video Editor Handle?
• Section2. Which Software Can Handle Large Videos?

Section 1. What Size Video Can an Ordinary Video Editor Handle?

Videos recorded with iPad, iPhone, or any other iOS device can be larger than individuals expect. If your video limit exceeds your desired social media platform’s size limitations, you can opt for video compression using the editing software tools to meet the standards of the required social platform.

1. For cutting Small or Middle Video Size - Online Editor

Video size limitations vary in every online video editor. Since these are free video editing tools available online, therefore they have restrictions and limitations to edit, download, and export videos. However, they are effective in terms of editing as they maintain the quality of the edited videos.

On the other hand, there are several with different video size limits such ranging from 100MB to 1GB.

2. For Cutting Large Video Size - Video Editing Software

Video editing software tools are unlike online editors. They have no limited video size

requirements and come with multiple inputs and output formats for video editing with several built-in features.

These video editors guarantee exceptional editing without declining the quality of the original video. Individuals can edit large videos faster and easier. In addition, software editing tools will be more advantageous for quick and high-quality video editing.

Section 2. Which Software Can Handle Large Videos?

One common way to handle large videos is to compress or downsize them. If you are facing difficulty in transferring, uploading, and editing the HD video files you’ve shot, you require an introduction to high-quality video editing software tools that can let you edit the video hassle-free on Mac.

1. Filmora X

Being one of the most popular freemium video editing software tools for both Mac and Windows, Filmora X can edit high quality up to 4k video footage, you can cut large video on this software easily. It features a variety of professional video tools, effects, and transitions that can be easily found on its user-friendly interface. Upon editing, users can select from the multiple options to save the video which can be directly shared on famous social media platforms.

Similarly, video compression is easy through Filmora X following the below steps:

• Click on the “New Project” to begin with the compression
• Import the video by clicking on the option on the top left corner

• Carry out any of the four experiments to compress the file including cropping the video screen, shredding the video length, tailoring the video resolution, or converting the video file format to MP3

PROS:

1. Simple to use, great for Mac and Windows users
2. Easy application of elements, overlays, and filters
3. Supports multiple input formats and many export options
4. Has over 400+ different transition effects
5. Contains built-in music and sound effect
6. Stylish text title editor (basic and advance edit)
7. Affordable perpetual license price

CONS:

1. The color grading tool is limited
2. No freehand masking tool

2. Adobe Premiere Pro

Adobe Premiere Pro is one of the HD editing tools for all Mac and Windows Users. Providing a professional video production solution from the beginning to the end facilitates users with a wide range of editing tools. The creative tools and integration of this application assist you to make footage into polished videos and films.

Having said that, Adobe Premiere Pro has a simple process to reduce the video file size so that it is easier for you to upload on the required platform. Follow the below steps to compress your video on the application.

• Import the footage and add it to the timeline
• Open the export settings and reduce the size
• Click export to compress the video if everything looks acceptable

PROS:

1. Correct and convenient work with all Windows and macOS devices
2. High-quality video and audio editing
3. Supported by a variety of formats such as HDV, HD, and Flash video
4. Built-in non-linear video editing
5. Video content editing in real-time

CONS:

1. Works for free only for 30 days
2. Quite resource-intensive system requirements

Video editing has become a simplified procedure with several features and options available. Whether it is about changing formats, reducing video size limits, or speeding up the video, everything is possible utilizing these advanced tools.

If you are confused about choosing the most suitable video editing tool, Wondershare Filmora X is an excellent Mac video editor that can meet both basic and advanced needs. The sense detection function lets you cut the large video easily. Download it today and experience the high-quality editing yourself before choosing any other pricey video editor.

Learn More: Tips for Shortening Video Length

An Alternative Way to Cut Large Videos Faster on Mac with Adobe Premiere Pro

Adobe Premiere Pro is the most used video editing software in all around the world. It can endure very large files and provide a great experience for video editors, facilitating every aspect of video editing. The software works on both Mac and Windows. In case we have large files, we usually turn to Adobe Premiere Pro, so, one of the most important things to do might be to cut large videos faster there. Actually, it is something not at all difficult – the steps are as follows: first, you need to import your footage and add it to the sequence (referred also as timeline, to the long horizontal window below);

then, you don’t need to do anything there, just open the export settings (the shortcut for which would be ctrl+m),

and reduce the size;

and finally, you need to click on export button to compress the video if this is already the result that you needed.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Time Lapse Mastery: A Step-by-Step Guide in Final Cut Pro

How to Make a Time Lapse Video in Final Cut Pro

Benjamin Arango

Mar 27, 2024• Proven solutions

It will be more interesting to change the speed of a video to give your project a totally different feeling, for example, by speeding up a video of a city’s traffic or the flow of clouds. Final Cut Pro offers users multiple options to adjust video speed easily, including time-lapse.

In this article, we are going to show you how you can easily increase the speed of your video from 2X up to 20X with Final Cut Pro. Also, you can choose manual custom speed as you like.

You May Also Like: How to Make Freeze-Frames and Slow Motion >>

---

This is a basic tutorial about Apple Final Cut Pro X, a professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac (Originally Wondershare Video Editor for Mac). This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below to try it right now. And here’s a video tutorial on how to make a time-lapse video with Filmora for your reference:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to Make a Time-Lapse Video in Final Cut Pro

Step 1 Import Clips

Choose File > New > Event. Name it and click OK. Label the project Timelapse. Then go to File > Import Media. Browse to source clips folder. Click Import Selected. Drop the clips onto the timeline.

Step 2 Apply Time-lapse Effect

Click the Retime pop-up menu below the viewer and choose Fast (or you can access Modify > Retime > Fast). There are 4 preset options you can choose: 2x, 4x, 8x, 20x. Or you can customize the speed by selecting Custom.

You can set any speed by adjusting the Rate. Reset the speed by clicking on the little arrow on the right side of the window.

You can also drag the retiming handle to adjust the speed: dragging to the left increases the speed, and dragging to the right decreases it.

Note: To set speed separately for different parts of one clip, you can choose Blade Speed first, and then blade the clip where you want to set different speeds.

That’s it. You may also want to learn this: how to add a countdown-timer in fcpx

If you have any questions about making time-lapse videos, feel free to drop a line below.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

It will be more interesting to change the speed of a video to give your project a totally different feeling, for example, by speeding up a video of a city’s traffic or the flow of clouds. Final Cut Pro offers users multiple options to adjust video speed easily, including time-lapse.

In this article, we are going to show you how you can easily increase the speed of your video from 2X up to 20X with Final Cut Pro. Also, you can choose manual custom speed as you like.

You May Also Like: How to Make Freeze-Frames and Slow Motion >>

---

This is a basic tutorial about Apple Final Cut Pro X, a professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac (Originally Wondershare Video Editor for Mac). This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below to try it right now. And here’s a video tutorial on how to make a time-lapse video with Filmora for your reference:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to Make a Time-Lapse Video in Final Cut Pro

Step 1 Import Clips

Choose File > New > Event. Name it and click OK. Label the project Timelapse. Then go to File > Import Media. Browse to source clips folder. Click Import Selected. Drop the clips onto the timeline.

Step 2 Apply Time-lapse Effect

Click the Retime pop-up menu below the viewer and choose Fast (or you can access Modify > Retime > Fast). There are 4 preset options you can choose: 2x, 4x, 8x, 20x. Or you can customize the speed by selecting Custom.

You can set any speed by adjusting the Rate. Reset the speed by clicking on the little arrow on the right side of the window.

You can also drag the retiming handle to adjust the speed: dragging to the left increases the speed, and dragging to the right decreases it.

Note: To set speed separately for different parts of one clip, you can choose Blade Speed first, and then blade the clip where you want to set different speeds.

That’s it. You may also want to learn this: how to add a countdown-timer in fcpx

If you have any questions about making time-lapse videos, feel free to drop a line below.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

It will be more interesting to change the speed of a video to give your project a totally different feeling, for example, by speeding up a video of a city’s traffic or the flow of clouds. Final Cut Pro offers users multiple options to adjust video speed easily, including time-lapse.

In this article, we are going to show you how you can easily increase the speed of your video from 2X up to 20X with Final Cut Pro. Also, you can choose manual custom speed as you like.

You May Also Like: How to Make Freeze-Frames and Slow Motion >>

---

This is a basic tutorial about Apple Final Cut Pro X, a professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac (Originally Wondershare Video Editor for Mac). This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below to try it right now. And here’s a video tutorial on how to make a time-lapse video with Filmora for your reference:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to Make a Time-Lapse Video in Final Cut Pro

Step 1 Import Clips

Choose File > New > Event. Name it and click OK. Label the project Timelapse. Then go to File > Import Media. Browse to source clips folder. Click Import Selected. Drop the clips onto the timeline.

Step 2 Apply Time-lapse Effect

Click the Retime pop-up menu below the viewer and choose Fast (or you can access Modify > Retime > Fast). There are 4 preset options you can choose: 2x, 4x, 8x, 20x. Or you can customize the speed by selecting Custom.

You can set any speed by adjusting the Rate. Reset the speed by clicking on the little arrow on the right side of the window.

You can also drag the retiming handle to adjust the speed: dragging to the left increases the speed, and dragging to the right decreases it.

Note: To set speed separately for different parts of one clip, you can choose Blade Speed first, and then blade the clip where you want to set different speeds.

That’s it. You may also want to learn this: how to add a countdown-timer in fcpx

If you have any questions about making time-lapse videos, feel free to drop a line below.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

It will be more interesting to change the speed of a video to give your project a totally different feeling, for example, by speeding up a video of a city’s traffic or the flow of clouds. Final Cut Pro offers users multiple options to adjust video speed easily, including time-lapse.

In this article, we are going to show you how you can easily increase the speed of your video from 2X up to 20X with Final Cut Pro. Also, you can choose manual custom speed as you like.

You May Also Like: How to Make Freeze-Frames and Slow Motion >>

---

This is a basic tutorial about Apple Final Cut Pro X, a professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac (Originally Wondershare Video Editor for Mac). This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below to try it right now. And here’s a video tutorial on how to make a time-lapse video with Filmora for your reference:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to Make a Time-Lapse Video in Final Cut Pro

Step 1 Import Clips

Choose File > New > Event. Name it and click OK. Label the project Timelapse. Then go to File > Import Media. Browse to source clips folder. Click Import Selected. Drop the clips onto the timeline.

Step 2 Apply Time-lapse Effect

Click the Retime pop-up menu below the viewer and choose Fast (or you can access Modify > Retime > Fast). There are 4 preset options you can choose: 2x, 4x, 8x, 20x. Or you can customize the speed by selecting Custom.

You can set any speed by adjusting the Rate. Reset the speed by clicking on the little arrow on the right side of the window.

You can also drag the retiming handle to adjust the speed: dragging to the left increases the speed, and dragging to the right decreases it.

Note: To set speed separately for different parts of one clip, you can choose Blade Speed first, and then blade the clip where you want to set different speeds.

That’s it. You may also want to learn this: how to add a countdown-timer in fcpx

If you have any questions about making time-lapse videos, feel free to drop a line below.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Also read: