Unlock the Power of the Ken Burns Effect: A Beginner’s Guide

How to Make Ken Burns Effect in Final Cut Pro?

Liza Brown

Mar 27, 2024• Proven solutions

Ken Burns Effect is an advanced feature of Final Cut Pro that allows users to add creative animations to their videos and images within minutes. You just need to select your picture, add movements to the clip, and choose the start and the end position to produce high-resolution stills. Besides, you can do a tilt, zoom in, a pan, or a combination of these three moves on a single image. This way, you can use the Ken Burns Effect to highlight the stimulating features in your photograph and save your memories in the form of innovative and high-definition animated clips.

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Final Cut Pro is user-friendly software and makes it easy for you to create a Ken Burns Effect without having advanced skills and expertise. So, are you interested in knowing the best part? Given below are a few simple steps to create Ken Burns Effect and make your pictures and videos look adorable.

Step 1: Add Images to the Timeline

First of all, you should specify a name for your project and add photos to the timeline in Final Cut Pro. For this purpose, select multiple photos and press E. A clip will be added to the timeline as shown in figure 1.

Step 2: Check Your Settings

As you can see, our timeline has no other video clip. Hence, Final Cut Pro will not recognize the clip until you adjust the video properties such as format, resolution, and rate, etc. For this purpose, click OK to use your preferred settings and press Shift + Z to fit the picture to your timeline window. Once you’re done it’s time to apply the Ken Burns Effect.

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

Select the clip or picture;
See the lower left of the viewer;
Go to the Viewer window using the drop-down menu;
Tap on the pop-up menu located in the bottom left-hand corner;
Choose the Crop option from the menu or press Shift + C;
Press the Ken Burns button in the Crop onscreen controls to add the effect; and
Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

In the Ken Burns display, you can see the controls for adjusting the panning and zooms effects by changing the size and position of two-colored rectangles overlaying on the clip. To customize the Ken Burns effect:

Adjust the green rectangle’s size and position to set the start position;
Adjust the red rectangle’s size and position to set the end position;
The arrow depicts the direction of camera position between start and end position;
In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

You’re not done yet because you need to hold your picture at the end of the animation. For this purpose, you should create a freezing frame at the end of the clip to make Ken Burns do this. Here’s the deal:

Press the Down arrow followed by the Left arrow to go to the last frame;
Press Option-F to add a freeze-frame;
Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

The users can also adjust the speed of the animation and the duration of the freeze-frame by trimming your clip. For this purpose, trim the length as per your requirement and it will optimize the speed as shown in figure 6.

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

Click on the Swap button;
The start frame will match the still frame (previous one);
Grab the end frame and move it to your desired position;
Apply enough zoom in to make the black areas disappear;
Preview to see how your animation looks.

Step 8: Play/Preview Looping

After you have optimized the speed of the Ken Burns Effect by trimming the clip’s length and have widened the shot to include everyone, it’s time to preview the changes you have made. Given below are simple steps:

Press the Play Loop button;
Tap on the Pause icon and return to editing;
Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Although you can apply a single Ken Burns movement to your image, you can still give the impression of multiple movements being used. This means the Ken Burns Effect can be added to multiple camera movements by duplicating the photo and building numerous movements in sequence.

Add the first camera movement to your image;
Duplicate the clip by click and drag option or copy and paste option;
Press the Swap button in the Ken Burns settings to reverse the start and end positions;
Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

The Ken Burns Effect is a feature in Final Cut Pro to create a pan and zoom effect by using your predefined start and end positions. Basically, it is a crop effect with one crop at the start of the clip while the other at the end. Ken Burns Effect can be further customized by adjusting the smoothness of the animation. While creating a Ken Burns Effect, the motion applied to the video clips gets automatically smoothed to accelerate and decelerate the movement slowly at the start and the end of the animation.

Why the Effect is named after Ken Burns?

Now, as you have learned the purpose of the Ken Burns Effect, you must be curious about its name. It is named after American documentarian Ken Burns, who is known for his instantly recognizable and highly influential visual aesthetic. Surprisingly, Ken Burns did not invent this Ken Burns Effect; rather, it has existed for decades. You might be wondering why the technique was then named after Ken Burns. This was due to the persistent and adroit use of this technique that it is now known as the Ken Burns Effect.

What are the Applications of Ken Burns Effect?

Primarily, the Ken Burns Effect is used due to the unavailability of a film or video. The technique gives action to still photographs to glorify the subjects of interest like couples in wedding photography. It gets better and better as you apply simulated parallax with Ken Burns Effect to make your 2D images appear as 3D plus advanced zooming visuals. You can also use the Ken Burns effect to make a video of your graduation ceremony pictures or memorable moments of reunion. Ken Burns Effect is also used in documentaries by professional filmmakers and editors.

Conclusion

Adding animated effects to your pictures and videos makes them look gorgeous. This is crazy, isn’t it, when you impress your peers with your editing skills. So, what’s the bottom line of this whole discussion? Try adding the Ken Burns Effect with Final Cut Pro to create a pan and zoom effect on your pictures and clips get the output in your desired format.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Step 1: Add Images to the Timeline

Step 2: Check Your Settings

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

Select the clip or picture;
See the lower left of the viewer;
Go to the Viewer window using the drop-down menu;
Tap on the pop-up menu located in the bottom left-hand corner;
Choose the Crop option from the menu or press Shift + C;
Press the Ken Burns button in the Crop onscreen controls to add the effect; and
Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

Adjust the green rectangle’s size and position to set the start position;
Adjust the red rectangle’s size and position to set the end position;
The arrow depicts the direction of camera position between start and end position;
In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

Press the Down arrow followed by the Left arrow to go to the last frame;
Press Option-F to add a freeze-frame;
Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

Click on the Swap button;
The start frame will match the still frame (previous one);
Grab the end frame and move it to your desired position;
Apply enough zoom in to make the black areas disappear;
Preview to see how your animation looks.

Step 8: Play/Preview Looping

Press the Play Loop button;
Tap on the Pause icon and return to editing;
Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Add the first camera movement to your image;
Duplicate the clip by click and drag option or copy and paste option;
Press the Swap button in the Ken Burns settings to reverse the start and end positions;
Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

Why the Effect is named after Ken Burns?

What are the Applications of Ken Burns Effect?

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Step 1: Add Images to the Timeline

Step 2: Check Your Settings

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

Select the clip or picture;
See the lower left of the viewer;
Go to the Viewer window using the drop-down menu;
Tap on the pop-up menu located in the bottom left-hand corner;
Choose the Crop option from the menu or press Shift + C;
Press the Ken Burns button in the Crop onscreen controls to add the effect; and
Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

Adjust the green rectangle’s size and position to set the start position;
Adjust the red rectangle’s size and position to set the end position;
The arrow depicts the direction of camera position between start and end position;
In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

Press the Down arrow followed by the Left arrow to go to the last frame;
Press Option-F to add a freeze-frame;
Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

Click on the Swap button;
The start frame will match the still frame (previous one);
Grab the end frame and move it to your desired position;
Apply enough zoom in to make the black areas disappear;
Preview to see how your animation looks.

Step 8: Play/Preview Looping

Press the Play Loop button;
Tap on the Pause icon and return to editing;
Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Add the first camera movement to your image;
Duplicate the clip by click and drag option or copy and paste option;
Press the Swap button in the Ken Burns settings to reverse the start and end positions;
Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

Why the Effect is named after Ken Burns?

What are the Applications of Ken Burns Effect?

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Step 1: Add Images to the Timeline

Step 2: Check Your Settings

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

Select the clip or picture;
See the lower left of the viewer;
Go to the Viewer window using the drop-down menu;
Tap on the pop-up menu located in the bottom left-hand corner;
Choose the Crop option from the menu or press Shift + C;
Press the Ken Burns button in the Crop onscreen controls to add the effect; and
Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

Adjust the green rectangle’s size and position to set the start position;
Adjust the red rectangle’s size and position to set the end position;
The arrow depicts the direction of camera position between start and end position;
In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

Press the Down arrow followed by the Left arrow to go to the last frame;
Press Option-F to add a freeze-frame;
Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

Click on the Swap button;
The start frame will match the still frame (previous one);
Grab the end frame and move it to your desired position;
Apply enough zoom in to make the black areas disappear;
Preview to see how your animation looks.

Step 8: Play/Preview Looping

Press the Play Loop button;
Tap on the Pause icon and return to editing;
Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Add the first camera movement to your image;
Duplicate the clip by click and drag option or copy and paste option;
Press the Swap button in the Ken Burns settings to reverse the start and end positions;
Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

Why the Effect is named after Ken Burns?

What are the Applications of Ken Burns Effect?

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Get Creative with Windows Video Editing: Adding 3D Visuals and Effects

You may want to add 3D effects to a video to make something in it appear realistic. For example, you can have balloons moving in a circle around a person’s head, make a building hit by a thunderstorm, etc. However, adding such properties to a footage requires a lot of focus and precision that comes with in-depth learning and a lot of practice.

That said, here you will learn how to add 3D effects to a video using Windows’s free built-in Photos app. In addition, you will also see how easy the process becomes if you use a dedicated third-party software that has been specifically designed for the purpose.

Part 1: How to Add 3D Effects in Windows 11 Photos App for Free

To add 3D effects to a video with the Photos app, you must right-click the media file, go to ‘Open with’, and click to select ‘Photos’ from the submenu. Once this is done, you can follow the steps that are given below to complete the remaining procedure:

Step 1: Open the 3D Effects Panel

In the Photos app, pause the video to avoid any distractions. Click the See more icon (with three horizontal dots) from the top-center, hover mouse to Edit more, and click Add 3D effects.

Step 2: Add a 3D Effect and Customize

Make sure that the Effects tab is selected from the top of the right pane, scroll through the available effects, and click the one that you want to add to the video. Once added, in the preview window, use the scaling handles and rotation tools to resize the effect and change its orientation respectively.

Optionally use the Volume slider from the right pane to increase or decrease the sound volume of the effect to blend it in with the audio of the footage. If required, drag the side handles of the effect in the progress bar at the bottom to increase or decrease the duration of the effect in the video.

Step 3: Use Anchor Point

Drag and place the 3D effect to the location you want it to appear at, turn on the Attach to a point button from the right pane, and drag the anchor point to the object where you want it to stick even if the camera moves.

Step 4: Export the Video

Click the Play button from the bottom to preview the video with the 3D effect, and if everything looks fine, click Save a copy from the bottom-right area.

When the Finish your video box appears, choose your preferred resolution from the Video quality drop-down list, and click Export.

Next, choose your preferred destination folder in the Save As box that opens up next, specify the name of the output file in the File name field, and click Export to export the modified clip in MP4 format.

Note: Videos that you export from the Photos app are by default saved in MP4 format.

As one of the best basic video editing software for beginners , the Microsoft Photos app allows you trim video, add text to video and much more. For details, check how to edit videos with the Microsoft Photos app on Windows 10 and Windows 11.

Part 2: How to Add 3D Effects to Video with Filmora

Although Photos is a free app in Windows 11, it has certain limitations. This is where Filmora video editor , a product by Wondershare, comes into play. Wondershare Filmora is a post-production application for both Windows and Mac computers, and is considered a good competitor of some of the industry-standard video editing applications like Adobe Premiere Pro, Final Cut Pro X, DaVinci Resolve, etc.

While the Photos app can add 3D effects to the videos quickly, Filmora gives more control by offering a plethora of editing tools, options, and presets. In addition, Filmora is a timeline-oriented tool that allows you to add effects, filters, and/or elements in their corresponding layers without making any changes to the original footage.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You can follow the step-by-step instructions that are given below to learn how to add 3D effects to a video with Wondershare Filmora:

Step 1: Import Source Video and Add It to the Timeline

After installing Wondershare Filmora on Windows 10 or Windows 11, launch the program, click anywhere inside the Media box present at the upper-left section of the interface, and locate and import the source video to the program. Next, hover the mouse over the thumbnail of the video, click the + icon from the bottom-right corner.

When the confirmation box appears, either click Match to Media or Keep Project Settings to adjust the project settings according to the media clip or modify the media clip according to the project preferences while adding the footage to the Timeline respectively.

Step 2: Add 3D Titles and Transitions

Click Titles from the toolbox at the top, type 3D Titles in the Search titles field present at the upper section of the upper-left box, and click 3D titles from the suggestions list.

From all the available 3D title presets that appear next, drag the one you like to the Timeline, and place it above the video track.

After this, double-click the placeholder text in the Preview window, and replace it with your caption. You can customize the font, color, and alignment of the text from the options that appear on left. Click OK from the lower-left area of the left pane to exit the editing mode. Repeat the process for all the texts that the preset has. Optionally, drag the sides of the 3D title in the Timeline to specify its duration of visibility on the screen.

To add the transitions, click Media from the toolbox at the top, click Import Media from the Media box, and repeat the process explained earlier to add a new video clip to the Timeline. Make sure that both the clips are on the same track, and are placed next to each other. Now, go to Transitions from the toolbox, and drag and place your preferred transition effect between the two media clips in the Timeline. Optionally you can drag the sides of the transition inwards or outwards to increase or decrease the speed of the effect respectively.

After this, move the Playhead (Skimmer) to the beginning of the Timeline, and press the Spacebar on your keyboard to preview the video.

Note: It is a good practice to preview your video several times during the entire editing process. This will help you identify the error sooner, and you will be able to address the issue with fewer hassles.

Step 3: Add Elements and Effects

Go to Elements from the toolbox, drag your preferred element from the upper-left box to the Timeline, and place it on a new track. You can drag the sides of the element in the Timeline to increase or decrease its visibility during video playback.

To add effects, go to Effects from the toolbox, drag your preferred effect from the upper-left box, and place it on a new layer in the Timeline. As it is with other entities, you can drag the sides of the effect to increase or decrease the duration of its impact on the video. Next, double-click the Effects layer in the Timeline, and use the available options in the box to make further adjustments.

Note: The options that you get by double-clicking the effect in the Timeline may vary according to the adjustments it allows you to make.

Once this is done, preview the video, click Export from the top-center, and use the tabs and options on the Export box to export the modified video in your preferred format.

Conclusion

If you are new to the VFX and video editing industry, trying hands with the Photos app would give you a fair idea about how things work. Once you are well-versed or if you are already a post-production professional, you can and you must go for a dedicated program like Wondershare Filmora that not only has an intuitive interface, it is also equipped with a plethora of presets to add 3D titles, elements, transitions, and effects to the videos without much hassle.

02 How to Add 3D Effects to Video with Filmora

Part 1: How to Add 3D Effects in Windows 11 Photos App for Free

Step 1: Open the 3D Effects Panel

Step 2: Add a 3D Effect and Customize

Step 3: Use Anchor Point

Step 4: Export the Video

Click the Play button from the bottom to preview the video with the 3D effect, and if everything looks fine, click Save a copy from the bottom-right area.

When the Finish your video box appears, choose your preferred resolution from the Video quality drop-down list, and click Export.

Note: Videos that you export from the Photos app are by default saved in MP4 format.

Part 2: How to Add 3D Effects to Video with Filmora

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You can follow the step-by-step instructions that are given below to learn how to add 3D effects to a video with Wondershare Filmora:

Step 1: Import Source Video and Add It to the Timeline

Step 2: Add 3D Titles and Transitions

Click Titles from the toolbox at the top, type 3D Titles in the Search titles field present at the upper section of the upper-left box, and click 3D titles from the suggestions list.

From all the available 3D title presets that appear next, drag the one you like to the Timeline, and place it above the video track.

After this, move the Playhead (Skimmer) to the beginning of the Timeline, and press the Spacebar on your keyboard to preview the video.

Step 3: Add Elements and Effects

Note: The options that you get by double-clicking the effect in the Timeline may vary according to the adjustments it allows you to make.

Once this is done, preview the video, click Export from the top-center, and use the tabs and options on the Export box to export the modified video in your preferred format.

Conclusion

02 How to Add 3D Effects to Video with Filmora

Part 1: How to Add 3D Effects in Windows 11 Photos App for Free

Step 1: Open the 3D Effects Panel

Step 2: Add a 3D Effect and Customize

Step 3: Use Anchor Point

Step 4: Export the Video

Click the Play button from the bottom to preview the video with the 3D effect, and if everything looks fine, click Save a copy from the bottom-right area.

When the Finish your video box appears, choose your preferred resolution from the Video quality drop-down list, and click Export.

Note: Videos that you export from the Photos app are by default saved in MP4 format.

Part 2: How to Add 3D Effects to Video with Filmora

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You can follow the step-by-step instructions that are given below to learn how to add 3D effects to a video with Wondershare Filmora:

Step 1: Import Source Video and Add It to the Timeline

Step 2: Add 3D Titles and Transitions

Click Titles from the toolbox at the top, type 3D Titles in the Search titles field present at the upper section of the upper-left box, and click 3D titles from the suggestions list.

From all the available 3D title presets that appear next, drag the one you like to the Timeline, and place it above the video track.

After this, move the Playhead (Skimmer) to the beginning of the Timeline, and press the Spacebar on your keyboard to preview the video.

Step 3: Add Elements and Effects

Note: The options that you get by double-clicking the effect in the Timeline may vary according to the adjustments it allows you to make.

Once this is done, preview the video, click Export from the top-center, and use the tabs and options on the Export box to export the modified video in your preferred format.

Conclusion

02 How to Add 3D Effects to Video with Filmora

Part 1: How to Add 3D Effects in Windows 11 Photos App for Free

Step 1: Open the 3D Effects Panel

Step 2: Add a 3D Effect and Customize

Step 3: Use Anchor Point

Step 4: Export the Video

Click the Play button from the bottom to preview the video with the 3D effect, and if everything looks fine, click Save a copy from the bottom-right area.

When the Finish your video box appears, choose your preferred resolution from the Video quality drop-down list, and click Export.

Note: Videos that you export from the Photos app are by default saved in MP4 format.

Part 2: How to Add 3D Effects to Video with Filmora

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You can follow the step-by-step instructions that are given below to learn how to add 3D effects to a video with Wondershare Filmora:

Step 1: Import Source Video and Add It to the Timeline

Step 2: Add 3D Titles and Transitions

Click Titles from the toolbox at the top, type 3D Titles in the Search titles field present at the upper section of the upper-left box, and click 3D titles from the suggestions list.

From all the available 3D title presets that appear next, drag the one you like to the Timeline, and place it above the video track.

After this, move the Playhead (Skimmer) to the beginning of the Timeline, and press the Spacebar on your keyboard to preview the video.

Step 3: Add Elements and Effects

Note: The options that you get by double-clicking the effect in the Timeline may vary according to the adjustments it allows you to make.

Once this is done, preview the video, click Export from the top-center, and use the tabs and options on the Export box to export the modified video in your preferred format.

Conclusion

The Ultimate List of Reliable YouTube to MP3 Converters

How to Find a Suitable YouTube to MP3 Converter

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

YouTube to Mp3 Converter is a program or platform that will let you transform YouTube videos to audio format, i.e., MP3, mainly observed when we wish to convert the video into the audio format, as the audio is critically more important than the video.

Now we’re here to explore further the format by converting YouTube MP4 videos to MP3.

Part 1 How to Convert YouTube Videos to MP3?

320YTmp3 is an easy-to-use YouTube converter that extracts YouTube audio files at a good quality.

Steps to convert YouTube to MP3 using 320YTmp3.

Step 1: Visit the 320YTmp3 official website. Copy the Youtube URL for a particular song or a video you want to convert to mp3 and download it in the box. Then, hit the “Search“button.

Step 2: You’ll now wander the MP3 download options. Select the dropdown menu to choose the download speed.

You can get higher download speeds if you possess a good Wi-Fi connection. Else, stick to the 64 kbps speed. Click “Convert” once you’ve chosen the download speed.

Step 3: It may take a while to convert the video to MP3, based on its size. Once the video converts, click on the “Download“ button to download and save your video.

Step 4: If you wish to save your video in other audio formats like m4a or webm, hit the “Audio“tab and hit the “Download“button next to your preferred format.

Consider using this YouTube mp3 converter and download your favorite music to listen to offline!

Part 2 What Should Consider Before Choosing Suitable YouTube to MP3 Converter?

01Look for the best SaaS App

First off, you wish to go for a SaaS app that works well on your desktop screen.

You want to use an app that does YouTube to MP3 format for PC. It should work on Mac and Windows OS.

01Feature of Batch Conversion

You may also desire the potential to convert YouTube playlists to MP3. Again, the batch transform will save time in pasting and copying links.

And you may be looking for mobile compatibility as well. In such a scenario, you can look for a vendor with a YouTube to MP3 app. And, if the brand of your smartphone is Android, then you may be looking to go for that.

01Format Compatibility

Besides converting YouTube to MP3, various other audio formats could be desirable.

Then, there’s a quality output level worth considering in a YouTube to MP3 converter. You may be enough or satisfied with lower bitrates like 96kbps in the interest of saving storage space.

Last but not least, you are looking for a platform that’s trustworthy and reliable. You don’t want your mobile or computer device’s security compromised.

There are tons of YouTube to MP3 converter tools out there, and most of them are adware supported. Some of them even contain malware.

So you want to make sure you do your research before you download anything.

Meanwhile, web browser-based conversion tools tend to be a bit more secure. And, the security of programs, namely the Wondershare Filmora, is hidden from nobody. Everyone using the software appreciates its authenticity besides its creative outlook.

So, let’s explore more about the Wondershare Filmora to convert YouTube to MP3 and extract audio seamlessly.

This method provides you access to convert YouTube to MP3 using a Video Editor. Wondershare Filmora offers various professional and essential editing tools and video effects and can download YouTube MP3 format. Filmora will be perfect for you if you need further editing after YouTube to MP3 conversion.

It is a beautiful product from Wondershare to edit after you convert YouTube to MP3.

Excited to explore unique features, then scroll down as follows:

● Flexible audio control for better audio adjustment

● Trim and Cut your desired tracks in video and audio files

● Get rid of unwanted noise and background disturbances in the audio files

● This tool guarantees crisp and quality video and audio files

Steps to convert YouTube to MP3 via Wondershare Filmora Video Editor :

Step 1: Launch Filmora to Upload Video

Open Filmora, then go to File-Import-Media to load the converted MP4 video to the Media Library.

Step 2: Drag Video to Edit

Drag the video or media to the timeline by clicking on the track.

Step 3: Convert to MP3

Then select the ‘Export’ tab and choose the ‘MP3’ format from the vast list.

Hit the Settings tab in the export panel to customize the output audio settings, such as the audio bitrate for higher audio quality.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Key Takeaways from This Episode

● An overview on YouTube to MP3 conversion.

● Essential factors to consider before choosing the YouTube to MP3 Converter.

● Finding the perfect as well as safe YouTube to MP3 Converter.