The Ultimate Guide to Audio-Video Syncing in Final Cut Pro X 2024

Amelia Lv12

2024-05-19 11:46:51 2024-05-19 11:46:51 Created 2024-05-20 11:46:51 2024-05-20 11:46:51 Updated

ai
>
video

The Ultimate Guide to Audio-Video Syncing in Final Cut Pro X 2024

Practical Guide: How to Sync Audio and Video in Final Cut Pro X 2024

Shanoon Cox

Mar 27, 2024• Proven solutions

Beautifully captured cinematic footage with crystal clear results and melodious audio attracts viewers and leaves an everlasting impression. However, if there is a delay in the audio and video, you need to sync audio and video clips.

Only an advanced video-editing software like Final Cut Pro X can solve this problem and get everything lined up and cohesive. Its auto-sync feature allows you to adjust audio with video and present your footage realistically and creatively. Similarly, users can create Multicam clips and include multiple clips at any given angle with the FCPX.

Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Part 1: How to Fix Audio and Video Sync Issue?

Why is Audio and Video out of Sync in Final Cut Pro X?

The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.

Whenever you face an out-of-sync problem, don’t assume that the clips in your sequence are also out of sync. Multiple factors can cause sync issues, the most prominent one is by an over-taxing of the processor when it tries to run the program at its maximum. Consequently, the overstressed processer fails to sync audio and video accordingly and causes a delay.

If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.

Set the Canvas size to “Fit Window”
Prevent the Canvas and Viewer from overlapping
Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
Set the control panel resolution must be to 75A Hz or higher
Do not select too many real-time audio tracks
Turn off the Mirror to Desktop option
Avoid opening multiple sequences simultaneously
Render the video sequence to a single file.

Part 2: How to Auto-sync in Final Cut Pro X?

Final Cut Pro X is an advanced and user-friendly video editing application. Its auto-sync feature automatically analyzes the audio and video clips selected in your timeline and allows you to sync video with audio.

To use this feature, use multiple audio and video clips recorded from different resources during the same take. Once you have selected, Final Cut Pro will automatically start analyzing the clips for sync points like date of file creation, markers, audio content, and time code, etc. After analyzing the clips, the syncing process will begin in which these audio and video clips will be synced together into a new clip without affecting the original clip. Even if your clips do not have any sync points, Final Cut Pro X will sync them at their respective starting points.

Users can also use custom settings for an advanced syncing process by adjusting different parameters according to their preferences. The following section explains the manual syncing process of audio and video clips in Final Cut Pro X.

This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.

Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.

And download Filmora to have a try!

In case you may want to learn how to Edit the Beat and Sync Videos to Music.

Best Video Editing Apps to Sync Video to the Beat of a Song.

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

After you have captured beautifully cinematic footage of a beach and recorded the audio separately, it’s time to add magic. If your results are crystal clear and the audio sounds melodious, you need to sync the audio and video clips and get everything lined up and cohesive.

Follow these simple steps to sync audio and video manually with Final Cut Pro X:

First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;

Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;

Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Multicam is an amazing feature of the Final Cut Pro X that allows users to sync a multiple-camera job and manage unlimited video and audio angles. You can make Multicam clips with diverse media sources and include as many clips in any given angle as you want. Make sure you have labeled your clips with a camera name or an angle to make Final Cut Pro X sync Multicam properly. You can even name all the clips shot by one camera in a single step.

Follow these steps to create Multicam clips:

Create unique folders and put all clips from each camera in these folders separately.
Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
In the Event Browser, select multiple clips captured with one camera or audio recorder.
Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
Click the checkbox “Use Audio for Synchronization” to sync audio.

Conclusion

Final Cut Pro X is a professional video editing software used by both beginners and experienced photographers to create magic in their videos. Powered by several amazing features and advanced video-editing options, the application features a trackless magnetic timeline and supports compound clips.

Sometimes, an over-taxing of the processor may cause a delay in the video edited by Final Cut Pro X. Hence, the audio and video are out of sync that declines the video quality. To solve this problem, Apple Inc. introduced an auto-sync feature in FCPX which automatically analyzes and synchronizes the audio and video clips. You can also match audio and video manually by selecting any two clips and selecting the Synchronize Clips option.

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Part 1: How to Fix Audio and Video Sync Issue?

Why is Audio and Video out of Sync in Final Cut Pro X?

The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.

If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.

Set the Canvas size to “Fit Window”
Prevent the Canvas and Viewer from overlapping
Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
Set the control panel resolution must be to 75A Hz or higher
Do not select too many real-time audio tracks
Turn off the Mirror to Desktop option
Avoid opening multiple sequences simultaneously
Render the video sequence to a single file.

Part 2: How to Auto-sync in Final Cut Pro X?

Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.

And download Filmora to have a try!

In case you may want to learn how to Edit the Beat and Sync Videos to Music.

Best Video Editing Apps to Sync Video to the Beat of a Song.

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Follow these simple steps to sync audio and video manually with Final Cut Pro X:

First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;

Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;

Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Follow these steps to create Multicam clips:

Create unique folders and put all clips from each camera in these folders separately.
Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
In the Event Browser, select multiple clips captured with one camera or audio recorder.
Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
Click the checkbox “Use Audio for Synchronization” to sync audio.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Part 1: How to Fix Audio and Video Sync Issue?

Why is Audio and Video out of Sync in Final Cut Pro X?

The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.

If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.

Set the Canvas size to “Fit Window”
Prevent the Canvas and Viewer from overlapping
Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
Set the control panel resolution must be to 75A Hz or higher
Do not select too many real-time audio tracks
Turn off the Mirror to Desktop option
Avoid opening multiple sequences simultaneously
Render the video sequence to a single file.

Part 2: How to Auto-sync in Final Cut Pro X?

Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.

And download Filmora to have a try!

In case you may want to learn how to Edit the Beat and Sync Videos to Music.

Best Video Editing Apps to Sync Video to the Beat of a Song.

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Follow these simple steps to sync audio and video manually with Final Cut Pro X:

First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;

Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;

Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Follow these steps to create Multicam clips:

Create unique folders and put all clips from each camera in these folders separately.
Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
In the Event Browser, select multiple clips captured with one camera or audio recorder.
Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
Click the checkbox “Use Audio for Synchronization” to sync audio.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Part 1: How to Fix Audio and Video Sync Issue?

Why is Audio and Video out of Sync in Final Cut Pro X?

The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.

If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.

Set the Canvas size to “Fit Window”
Prevent the Canvas and Viewer from overlapping
Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
Set the control panel resolution must be to 75A Hz or higher
Do not select too many real-time audio tracks
Turn off the Mirror to Desktop option
Avoid opening multiple sequences simultaneously
Render the video sequence to a single file.

Part 2: How to Auto-sync in Final Cut Pro X?

Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.

And download Filmora to have a try!

In case you may want to learn how to Edit the Beat and Sync Videos to Music.

Best Video Editing Apps to Sync Video to the Beat of a Song.

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Follow these simple steps to sync audio and video manually with Final Cut Pro X:

First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;

Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;

Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Follow these steps to create Multicam clips:

Create unique folders and put all clips from each camera in these folders separately.
Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
In the Event Browser, select multiple clips captured with one camera or audio recorder.
Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
Click the checkbox “Use Audio for Synchronization” to sync audio.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Make a Statement: How to Create a Perfectly Sized Facebook Video Cover

Ways To Make Sure Your Facebook Video Cover Size Is Perfect

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Facebook has become much more than a social networking site. Presently with everything taking the social media route, branding and marketing is no exception.

To create an impact on the user, the Facebook video cover size must be right without any borders or trimmed parts.

Part 1 Key Facebook Cover Video Specifications

A Facebook cover video works like a mini-advertisement that is played on a loop continuously. To keep the visitors engaged and interested in the video, the video needs to look neat, clean, bright and in the right size and the aspect ratio to fit perfectly in the given space. Key specifications for the cover video are enlisted below.

Video cover Facebook size: As such, there are no specific size guidelines issues but it is recommended to keep the size of the video less than 1.75GB. The small size will ensure that users having slower browsing speed can also watch the video in a hassle-free manner.

Dimensions of the video: A video to be used as a cover should be at least 820 X 312 pixels and to get the optimum results it is suggested to keep it around 820 X 462 pixels. If you will watch the video on a desktop, it will be cropped from the sides, or the top or bottom. Thus, to ensure that the video looks perfect on a phone as well as desktop keep the aspect ratio at 16:9 and place the important text or other content at the center.

File type of the video: Videos in MP4 or MOV format are suggested to be used as the cover video and their resolution should be a maximum of 1080p.

Duration of the video: A Facebook cover video can be between 20 seconds to 90 seconds and you can also choose to play it on a loop.

Part 2 Useful Tips for a Wonderful Cover Video

To make sure that your cover video is interesting, engaging, and uploaded in a hassle-free manner, below listed are some useful tips

● Optimizing the video for the mobile phone users: Several times your video may run smoothly on your system but may have issues while playing on a mobile phone. So, keep your texts and important content within the specified size so that even if the video is cropped it does not look awkward.

● Go for prompt action: It is always better to get the CTA opportunities whenever available. When something specific is required from a video like increasing traffic, adding more clients, and similar others, let the video prompt to do that and avoid adding too much text.

● Audio is not very critical: Though audio can be added to the cover video, it does not have much relevance to the content you wish to showcase to the viewer. By default, the videos on Facebook are muted and also around 85% of the videos are watched without the sound.

● Keep the focus on one visual: A Facebook page is already too crowded and thus avoids loading the cover video with too much content. Focus on a single visual which can be text, image, CTA, or other depending on your purpose.

● Keep a natural loop: The video will be played on a loop continuously and thus to make it look appealing the starting and the ending should be smooth.

● Keeping the right size: Keeping the recommended Facebook cover page video size is important to make the video appear without any distortion, borders, or cropping.

Part 3 Popular Facebook Cover Video Examples and Templates

A wide range of readymade templates to create cover videos are available. Using one of these templates, an impressive video can be created in no time. Some of the popular ones can be checked as below.

● Marketing cover video: To grab the attention of the clients, the marketing videos have to be bright and polished. So, if you too want to create one for your brand or business this template can be used.

● Cover video for new business: If you are launching a new business offering some products or services, this template will let you create an interesting video. Using this template, an introduction to your business can be given.

● Cover videos showreels: If you are into real-estate or fashion-related brands, a showreel video is a good option to be used as a cover video. The showreel of an event, behind-the-stage clips, tours, and similar others can be created.

● Event Promotion cover video:Promotion of an event through a cover video is a good option and this can be used for different purposes like fashion shows, open house tours, online sessions, webinars, and more. You can also create your event cover video using this template.

● Cover video to narrate a story: Narrating a story through a cover video is also a good way for promoting your business and especially if it is related to home décor, makeovers, travel, adventure, and similar others. You can also create your own inspiring, motivating, and interesting story using this template.

Part 4 How to Make Your Facebook Cover Video: The Definitive Guide

For a Facebook cover video to grab the attention and keep the viewers engaged it needs to be interesting, bright, and fit in size as recommended. Thus, to meet all these requirements and customize the videos a good editing tool is required. Here we recommend Wondershare Filmora Video Editor as the best choice. This professional software can be downloaded quickly on your Windows and Mac systems after which it is all set to customize your videos for the Facebook Cover video in no time.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Key features

● Choose the aspect ratio of the video as 16:9 using the software.

● Edit the video and remove unwanted portions to make it between 20 seconds to 90 seconds. You can also merge multiple small clips to create one desired video.

● Compress the video to keep it within the size limit.

● Convert your videos to MP4 or MOV format as recommended to be used as Facebook Conver.

● Customize your videos by adding the text and titles, overlays, filters, transitions & elements, and using other editing functions.

● Advanced editing features include video stabilization, 3D lut, split-screen, color tuning, green screen, and more.

● Allows uploading your videos to social media sites including Facebook.

Key Takeaways from This Episode

● A Facebook cover video has become the latest trend for promoting business and brands,

● A cover video should be in the recommended Facebook page video cover size, dimension, duration, and length.

● Using the tips and tricks an engaging and interesting cover video can be created.

● Editing software like Wondershare Filmora can be used for creating a great cover video as needed.

Try It Free Try It Free

Facebook has become much more than a social networking site. Presently with everything taking the social media route, branding and marketing is no exception.

To create an impact on the user, the Facebook video cover size must be right without any borders or trimmed parts.

Part 1 Key Facebook Cover Video Specifications

File type of the video: Videos in MP4 or MOV format are suggested to be used as the cover video and their resolution should be a maximum of 1080p.

Duration of the video: A Facebook cover video can be between 20 seconds to 90 seconds and you can also choose to play it on a loop.

Part 2 Useful Tips for a Wonderful Cover Video

To make sure that your cover video is interesting, engaging, and uploaded in a hassle-free manner, below listed are some useful tips

● Keep a natural loop: The video will be played on a loop continuously and thus to make it look appealing the starting and the ending should be smooth.

● Keeping the right size: Keeping the recommended Facebook cover page video size is important to make the video appear without any distortion, borders, or cropping.

Part 3 Popular Facebook Cover Video Examples and Templates

Part 4 How to Make Your Facebook Cover Video: The Definitive Guide

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Key features

● Choose the aspect ratio of the video as 16:9 using the software.

● Edit the video and remove unwanted portions to make it between 20 seconds to 90 seconds. You can also merge multiple small clips to create one desired video.

● Compress the video to keep it within the size limit.

● Convert your videos to MP4 or MOV format as recommended to be used as Facebook Conver.

● Customize your videos by adding the text and titles, overlays, filters, transitions & elements, and using other editing functions.

● Advanced editing features include video stabilization, 3D lut, split-screen, color tuning, green screen, and more.

● Allows uploading your videos to social media sites including Facebook.

Key Takeaways from This Episode

● A Facebook cover video has become the latest trend for promoting business and brands,

● A cover video should be in the recommended Facebook page video cover size, dimension, duration, and length.

● Using the tips and tricks an engaging and interesting cover video can be created.

● Editing software like Wondershare Filmora can be used for creating a great cover video as needed.

Try It Free Try It Free

Facebook has become much more than a social networking site. Presently with everything taking the social media route, branding and marketing is no exception.

To create an impact on the user, the Facebook video cover size must be right without any borders or trimmed parts.

Part 1 Key Facebook Cover Video Specifications

File type of the video: Videos in MP4 or MOV format are suggested to be used as the cover video and their resolution should be a maximum of 1080p.

Duration of the video: A Facebook cover video can be between 20 seconds to 90 seconds and you can also choose to play it on a loop.

Part 2 Useful Tips for a Wonderful Cover Video

To make sure that your cover video is interesting, engaging, and uploaded in a hassle-free manner, below listed are some useful tips

● Keep a natural loop: The video will be played on a loop continuously and thus to make it look appealing the starting and the ending should be smooth.

● Keeping the right size: Keeping the recommended Facebook cover page video size is important to make the video appear without any distortion, borders, or cropping.

Part 3 Popular Facebook Cover Video Examples and Templates

Part 4 How to Make Your Facebook Cover Video: The Definitive Guide

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Key features

● Choose the aspect ratio of the video as 16:9 using the software.

● Edit the video and remove unwanted portions to make it between 20 seconds to 90 seconds. You can also merge multiple small clips to create one desired video.

● Compress the video to keep it within the size limit.

● Convert your videos to MP4 or MOV format as recommended to be used as Facebook Conver.

● Customize your videos by adding the text and titles, overlays, filters, transitions & elements, and using other editing functions.

● Advanced editing features include video stabilization, 3D lut, split-screen, color tuning, green screen, and more.

● Allows uploading your videos to social media sites including Facebook.

Key Takeaways from This Episode

● A Facebook cover video has become the latest trend for promoting business and brands,

● A cover video should be in the recommended Facebook page video cover size, dimension, duration, and length.

● Using the tips and tricks an engaging and interesting cover video can be created.

● Editing software like Wondershare Filmora can be used for creating a great cover video as needed.

Try It Free Try It Free

Facebook has become much more than a social networking site. Presently with everything taking the social media route, branding and marketing is no exception.

To create an impact on the user, the Facebook video cover size must be right without any borders or trimmed parts.

Part 1 Key Facebook Cover Video Specifications

File type of the video: Videos in MP4 or MOV format are suggested to be used as the cover video and their resolution should be a maximum of 1080p.

Duration of the video: A Facebook cover video can be between 20 seconds to 90 seconds and you can also choose to play it on a loop.

Part 2 Useful Tips for a Wonderful Cover Video

To make sure that your cover video is interesting, engaging, and uploaded in a hassle-free manner, below listed are some useful tips

● Keep a natural loop: The video will be played on a loop continuously and thus to make it look appealing the starting and the ending should be smooth.

● Keeping the right size: Keeping the recommended Facebook cover page video size is important to make the video appear without any distortion, borders, or cropping.

Part 3 Popular Facebook Cover Video Examples and Templates

Part 4 How to Make Your Facebook Cover Video: The Definitive Guide

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Key features

● Choose the aspect ratio of the video as 16:9 using the software.

● Edit the video and remove unwanted portions to make it between 20 seconds to 90 seconds. You can also merge multiple small clips to create one desired video.

● Compress the video to keep it within the size limit.

● Convert your videos to MP4 or MOV format as recommended to be used as Facebook Conver.

● Customize your videos by adding the text and titles, overlays, filters, transitions & elements, and using other editing functions.

● Advanced editing features include video stabilization, 3D lut, split-screen, color tuning, green screen, and more.

● Allows uploading your videos to social media sites including Facebook.

Key Takeaways from This Episode

● A Facebook cover video has become the latest trend for promoting business and brands,

● A cover video should be in the recommended Facebook page video cover size, dimension, duration, and length.

● Using the tips and tricks an engaging and interesting cover video can be created.

● Editing software like Wondershare Filmora can be used for creating a great cover video as needed.

FCPX Visual Effects: Freeze Frames, Slow Motion, and Advanced Editing

Final Cut Pro X: Freeze-Frames and Slow Motion

Benjamin Arango

Mar 27, 2024• Proven solutions

A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.

This article shows you how to do this using Final Cut Pro X.

For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

A still-frame freezes action. For instance, here is a clip of a hummingbird getting ready to land on a bird feeder. I want to create a freeze-frame of the bird in flight. (Um, yeah, I use “freeze-frame” and “still-frame” interchangeably.)

In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.

This creates a two-second freeze-frame at the position of the playhead.

Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.

In case you were wondering, this is what the freeze looks like. It freezes the flight of the hummingbird in the middle of playback, allowing us to add graphics or other text then resume the action as though nothing had happened.

Very cool, except….

Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.

So, here’s another way to do this.

Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.

This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.

Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.

As a connected clip, we can move this new freeze-frame wherever we want. However, be careful in moving the clip, because, unless you mark the original frame with a marker (type “M”), there’s no easy way to match the still frame with the source frame, once the still frame is moved somewhere else.

I use both these techniques in many different projects.

2. HOLD FRAME

A Hold Frame is similar to an in-line still frame, but with more flexibility.

Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).

This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.

Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.

Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.

To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.

NOTE: Changing the source frame is a feature that I like a LOT!

3. SLOW (or FAST) MOTION

fast/slow motion

We use slow-motion to show events that are too fast for the unaided eye to see. And fast motion to speed up very slow events. Both of these effects use what’s called a “constant speed change,” where the entire clip changes by the same amount - either faster or slower.

WE create either effect using the same tools, just different values. Here’s how.

Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).

Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)

create slow/fast motion

Three things happen at once:

The duration of the clip changes
The orange Retiming bar appears over the top of the clip
The speed of the clip changes

To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).

There are two ways to change the speed of a clip.

The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.

Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.

This opens a new dialog allowing a number of changes:

Reverse. Plays the clip in reverse.
Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.

You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.

4. EXTRA CREDIT

There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)

Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.

Normal. This is the best choice for speeds of 50% or faster.
Frame Blending. This is the best choice for speeds of about 20% to 50%.
Optical Flow. This is the best choice for speeds slower than about 20%.

Frame blending puts a short dissolve between frames when running in slow motion to improve the illusion of motion. Optical Flow invents in-between frames to minimize the jerkiness of extremely slow motion.

Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.

This is a basic tutorial about Apple Final Cut Pro X, a professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

SUMMARY

Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.

This article shows you how to do this using Final Cut Pro X.

For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.

This creates a two-second freeze-frame at the position of the playhead.

Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.

Very cool, except….

Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.

So, here’s another way to do this.

Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.

This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.

Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.

I use both these techniques in many different projects.

2. HOLD FRAME

A Hold Frame is similar to an in-line still frame, but with more flexibility.

Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).

This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.

Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.

Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.

To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.

NOTE: Changing the source frame is a feature that I like a LOT!

3. SLOW (or FAST) MOTION

fast/slow motion

WE create either effect using the same tools, just different values. Here’s how.

Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).

Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)

create slow/fast motion

Three things happen at once:

The duration of the clip changes
The orange Retiming bar appears over the top of the clip
The speed of the clip changes

To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).

There are two ways to change the speed of a clip.

The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.

Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.

This opens a new dialog allowing a number of changes:

Reverse. Plays the clip in reverse.
Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.

You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.

4. EXTRA CREDIT

There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)

Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.

Normal. This is the best choice for speeds of 50% or faster.
Frame Blending. This is the best choice for speeds of about 20% to 50%.
Optical Flow. This is the best choice for speeds slower than about 20%.

Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

SUMMARY

Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.

This article shows you how to do this using Final Cut Pro X.

For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.

This creates a two-second freeze-frame at the position of the playhead.

Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.

Very cool, except….

Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.

So, here’s another way to do this.

Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.

This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.

Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.

I use both these techniques in many different projects.

2. HOLD FRAME

A Hold Frame is similar to an in-line still frame, but with more flexibility.

Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).

This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.

Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.

Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.

To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.

NOTE: Changing the source frame is a feature that I like a LOT!

3. SLOW (or FAST) MOTION

fast/slow motion

WE create either effect using the same tools, just different values. Here’s how.

Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).

Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)

create slow/fast motion

Three things happen at once:

The duration of the clip changes
The orange Retiming bar appears over the top of the clip
The speed of the clip changes

To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).

There are two ways to change the speed of a clip.

The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.

Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.

This opens a new dialog allowing a number of changes:

Reverse. Plays the clip in reverse.
Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.

You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.

4. EXTRA CREDIT

There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)

Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.

Normal. This is the best choice for speeds of 50% or faster.
Frame Blending. This is the best choice for speeds of about 20% to 50%.
Optical Flow. This is the best choice for speeds slower than about 20%.

Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

SUMMARY

Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.

This article shows you how to do this using Final Cut Pro X.

For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.

This creates a two-second freeze-frame at the position of the playhead.

Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.

Very cool, except….

Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.

So, here’s another way to do this.

Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.

This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.

Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.

I use both these techniques in many different projects.

2. HOLD FRAME

A Hold Frame is similar to an in-line still frame, but with more flexibility.

Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).

This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.

Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.

Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.

To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.

NOTE: Changing the source frame is a feature that I like a LOT!

3. SLOW (or FAST) MOTION

fast/slow motion

WE create either effect using the same tools, just different values. Here’s how.

Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).

Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)

create slow/fast motion

Three things happen at once:

The duration of the clip changes
The orange Retiming bar appears over the top of the clip
The speed of the clip changes

To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).

There are two ways to change the speed of a clip.

The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.

Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.

This opens a new dialog allowing a number of changes:

Reverse. Plays the clip in reverse.
Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.

You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.

4. EXTRA CREDIT

There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)

Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.

Normal. This is the best choice for speeds of 50% or faster.
Frame Blending. This is the best choice for speeds of about 20% to 50%.
Optical Flow. This is the best choice for speeds slower than about 20%.

Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

SUMMARY

Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Unlock the Power of YouTube: Top Tips for MP3 Conversion

Tips That Show Anybody on Youtube to Mp3 Converter Review

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

In this article, we will examine the Youtube to Mp3 Converter Review through which you can select the appropriate convert; to avail yourself of a hassle-free audio listening experience.

Part 1 What is a YouTube to MP3 converter?

01The Definitive Guide to YouTube to MP3

There are different tools available over the internet which let you convert the Youtube to MP3 file. The basic concept behind using the tools is that you are allowed to extract the audio content from your favorite video streaming and save it as an MP3 file on your device. There are different ways by which you can convert Youtube video to MP3 file format discussed below:

How to Convert YouTube to MP3 by an Online YouTube to MP3 Tool

It is a free service that facilitates you to convert the videos into MP3 files within the one-hour limit. However, the conversion process is estimated to be completed within a few minutes. You do not need to register on the tool to avail the online service. After converting the Youtube files, you can easily save the converted MP3 file on your device and avail a pleasing listening experience. For using the online tool, you need to follow the steps listed below.

● It would help of you went to “ Get ytMP3 tool “ by clicking on YouTube to Mp3 Converter (ytmp3.cc)

● In this step, you have to copy the track URL from Youtube and paste it into the box available. After pasting the “URL,” you ought to click on the “Convert” button available.

● After clicking, you will get the converted videos in a few minutes. You need to now click on the” Download “option available and select the desired storage location by navigating among folders and drives to save your audio MP3 files.

● After converting the Youtube videos, you can listen to the audio offline, and converted MP3 file format guarantees flawless audio quality.

How to Convert YouTube to MP3 by a Video Converter

If you want to convert the Youtube to MP3 files using the video converter, all you have to do is to follow the easy steps listed below

● You need to download and install your preferred converter on your computer available online.

● Now go to your favorite Youtube videos and copy the link file link available on the address bar.

● Now, launch the video converter, paste the URL on the box available, and choose the “Download MP3” option available from the drop-down option. The sooner process of audio extract will get started.

● When the downloading process gets completed, you have to click on the finished option available at the top of the window to get the audio file.

Point to remember: If you want to discover the folder details in which the audio file is stored, you need to choose” Open File Location,” which will take you to the folder where the file is saved.

02Why Is Mp3 The Popular Audio Format?

MP3 file is ideal for extensive audio file sharing because it is available in a manageable size and works best for a website that hosts the audio files. The main reason behind the popularity of MP3 files is their overall sound quality; however, it is not the highest quality but still offers several benefits to the listening experience.

Part 2 YouTube and MP3 Video Formats

Yt1s (Youtube downloader) tool will facilitate you convert YouTube videos to MP3. This tool supports entire file formats like MP3 (Mp3 128kbps.320kbps. 64kbps.96kbps.192kbps.256 kbps), MP4 M4V. MP4, MP4, MP4V.

Part 3 Benefits of YouTube to Mp3 Conversion tools

Some of the significant benefits of Youtube to MP3 conversion tools are listed below:

● Different music applications are available over the Internet, such as Amazon Music and Spotify, which are paid; however, most of the Youtube to MP3 converter is available free of cost and help you extract audio files from the Youtube videos.

● The primary benefit of using the tool is that it is a one-time task of converting the files, and then you can keep the converted audio forever on your computer.

● The converted file is compatible with the MP3 file format and runs without internet connectivity.

● By choosing the Youtube to MP3 converter tool, you will extract the particular part of the videos and use them as per your requirements, like setting your phone ringtone.

Part 4 8 Best Free YouTube To MP3 Converters to Convert

01The best YouTube to MP3 converters

After understanding the advantages of the converter tools, we will discuss Youtube to mp3 converter reviews which help you to the appropriate tool as per your requirement.

Pulltube

It is one of the most popular and reliable converter tools to download and trim videos from Youtube.

Operating System: 10.12

Pros:

● Can crop and trim video easily

● Exotic interface

● Good performance

Cons:

● Limed format option available

● Not available free of cost

Rating:

4 star/5 star

Features:

● You can use the Pulltube tools to extract audio from over 1000 sites, including Daily Motion, Facebook, and much more.

● You can extract particular audio from the movies.

Snapdownloader

It is recognized as one of the best converter tools for downloading and converting Youtube videos into MP3 and MP4 format.

Operating System: 10.12

Pros:

● Ease to use with user-friendly interface

● Download multiple videos from a different website

● Support both Windows and Mac OS.

Cons:

● Not available free of cost for a lifetime

Rating:

5 star/5 star

Features:

● You can use the Snapdownloader tools to extract audio from around 900 websites.

● Fast downloading speed.

GO-MP3

Go-MP3 is a free online converter tool available for downloading unlimited videos from YouTube to MP3 at high speeds

Operating System: 10.12

Pros:

● Ease to use with user-friendly interface

● Available free of cost completely

● Unlimited Download.

Cons:

● Only support MP3 format

Rating:

5 star/5 star

Features:

● You can efficiently extract the audio file from Youtube without registering on the site.

● Fast downloading speed.

● No cluster and advertisement.

VideoProc

VideoProc is an ideal converter tool for converting Youtube videos into different audio and video formats at a GPU-accelerated speed.

Pros:

● Ease to use with user-friendly interface

● Available free of cost completely

● Unlimited Download.

Cons:

● For larger file extraction, you need to choose the paid version of the tool.

Rating:

4.5 star/5 star

Features:

● Support all popular/rare formats and codecs.

● Fast downloading speed.

Leawo Prof. Media 11

It is a converter tool used for downloading YouTube videos and converting them to different formats. The tool’s trial version is available free of cost; however, you can choose a 1-Year license and lifetime license to use the tool.

Pros:

● Ease to use with user-friendly interface

● 1-click burning of ISO image file

● Adjust audio and video parameters.

Cons:

● Not available free of cost for a complete package

Rating:

5 star/5 star

Features:

● Supports; more than 180 formats for the conversion.

● Fast downloading speed.

aTube Catcher

aTube Catcher is an ideal free desktop application that converts Youtube videos to MP3 file format.

Pros:

● Ease to use with user-friendly interface

● Useful for creating webinars and presentations

● Available free of cost

Cons:

● Not ideal for other websites

Rating:

3.5 star/5 star

Features:

● aTube Catcher supports all Window version

● This tool will allow you to record the screen.

● . It supports various formats like 3GP, AVI, XVID, MP4, and other formats to convert videos into.

Wondershare Filmora Video Editor

Filmora from Wondershare is a famous and leading video editing software with excellent features. By downloading the Filmora software, you can easily extract the audio file from the Youtube videos and save it on the device.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Requirements:

Microsoft Windows 10 (64-bit),

Microsoft Windows 8 (64-bit)

Apple: macOS 11 Big Sur, macOS 10.15 Catalina, macOS 10.14 Mojave, macOS 10.13 High Sierra

Pros:

● Easy to use interface

● Supports both Windows and Mac OS

● By choosing a tool, you can explore your creativity

Cons:

● Not found yet

Rating:

5star/ 5star

Features:

● Filmora includes several video editing option which makes it preferred and ideal tool for video editing purposes.

4K video downloader

This tool allows downloading and converting videos, channels, sub-titles, playlists, and more from various sites.

Pros:

● Easy to use interface

● Multi-platform Compatibility

● You can also download virtual reality videos

Cons:

● Not available free of cost

Rating

4.7 star/ 5star

Features:

● After activating the tool’s smart mode, you will receive a faster downloading speed.

02Comparison of Tools to Convert YouTube to Mp3

Tools	Rating	Rating	Platforms	Category
Pulltube	4 star	Online	Windows and MacOS	Youtube converter
Snapdownloader	5 star	Desktop	Windows and Mac OS	Youtube to MP3 Converter
Go-MP3	5 star	Online	Web-based	YouTube to MP3 Converter
VideoProc	4.5 star	Desktop	Windows and Mac	Video Audio converter, Editor, Downloader
Leawo Prof. Media 11	5 star	Desktop	Windows and Mac	11-in-1 media converter
aTube Catcher	3.5 star	Desktop	Windows	Window downloader /screen recorder
Filmora	5 star	Desktop	Windows and Mac Os	Video Audio converter , Editor, Downloader
4K video downloader	4.7 star	Desktop	Windows and Mac OS	Youtube to MP3 Converter

Key Takeaways from This Episode

● The need of converting YouTube to MP3 occurs many times and we think we have made you all well-versed with the topic now.

● If you are looking to get an audio file in MP3 format from your favorite Youtube videos or another website, here are some of the best Youtube to MP3 converter reviews provided to you to make the right decision.

● If you still have any doubts or suggestions, do let us know by dropping a comment in the box given below.

Try It Free Try It Free

In this article, we will examine the Youtube to Mp3 Converter Review through which you can select the appropriate convert; to avail yourself of a hassle-free audio listening experience.

Part 1 What is a YouTube to MP3 converter?

01The Definitive Guide to YouTube to MP3

How to Convert YouTube to MP3 by an Online YouTube to MP3 Tool

● It would help of you went to “ Get ytMP3 tool “ by clicking on YouTube to Mp3 Converter (ytmp3.cc)

● In this step, you have to copy the track URL from Youtube and paste it into the box available. After pasting the “URL,” you ought to click on the “Convert” button available.

● After converting the Youtube videos, you can listen to the audio offline, and converted MP3 file format guarantees flawless audio quality.

How to Convert YouTube to MP3 by a Video Converter

If you want to convert the Youtube to MP3 files using the video converter, all you have to do is to follow the easy steps listed below

● You need to download and install your preferred converter on your computer available online.

● Now go to your favorite Youtube videos and copy the link file link available on the address bar.

● When the downloading process gets completed, you have to click on the finished option available at the top of the window to get the audio file.

02Why Is Mp3 The Popular Audio Format?

Part 2 YouTube and MP3 Video Formats

Part 3 Benefits of YouTube to Mp3 Conversion tools

Some of the significant benefits of Youtube to MP3 conversion tools are listed below:

● The primary benefit of using the tool is that it is a one-time task of converting the files, and then you can keep the converted audio forever on your computer.

● The converted file is compatible with the MP3 file format and runs without internet connectivity.

● By choosing the Youtube to MP3 converter tool, you will extract the particular part of the videos and use them as per your requirements, like setting your phone ringtone.

Part 4 8 Best Free YouTube To MP3 Converters to Convert

01The best YouTube to MP3 converters

After understanding the advantages of the converter tools, we will discuss Youtube to mp3 converter reviews which help you to the appropriate tool as per your requirement.

Pulltube

It is one of the most popular and reliable converter tools to download and trim videos from Youtube.

Operating System: 10.12

Pros:

● Can crop and trim video easily

● Exotic interface

● Good performance

Cons:

● Limed format option available

● Not available free of cost

Rating:

4 star/5 star

Features:

● You can use the Pulltube tools to extract audio from over 1000 sites, including Daily Motion, Facebook, and much more.

● You can extract particular audio from the movies.

Snapdownloader

It is recognized as one of the best converter tools for downloading and converting Youtube videos into MP3 and MP4 format.

Operating System: 10.12

Pros:

● Ease to use with user-friendly interface

● Download multiple videos from a different website

● Support both Windows and Mac OS.

Cons:

● Not available free of cost for a lifetime

Rating:

5 star/5 star

Features:

● You can use the Snapdownloader tools to extract audio from around 900 websites.

● Fast downloading speed.

GO-MP3

Go-MP3 is a free online converter tool available for downloading unlimited videos from YouTube to MP3 at high speeds

Operating System: 10.12

Pros:

● Ease to use with user-friendly interface

● Available free of cost completely

● Unlimited Download.

Cons:

● Only support MP3 format

Rating:

5 star/5 star

Features:

● You can efficiently extract the audio file from Youtube without registering on the site.

● Fast downloading speed.

● No cluster and advertisement.

VideoProc

VideoProc is an ideal converter tool for converting Youtube videos into different audio and video formats at a GPU-accelerated speed.

Pros:

● Ease to use with user-friendly interface

● Available free of cost completely

● Unlimited Download.

Cons:

● For larger file extraction, you need to choose the paid version of the tool.

Rating:

4.5 star/5 star

Features:

● Support all popular/rare formats and codecs.

● Fast downloading speed.

Leawo Prof. Media 11

Pros:

● Ease to use with user-friendly interface

● 1-click burning of ISO image file

● Adjust audio and video parameters.

Cons:

● Not available free of cost for a complete package

Rating:

5 star/5 star

Features:

● Supports; more than 180 formats for the conversion.

● Fast downloading speed.

aTube Catcher

aTube Catcher is an ideal free desktop application that converts Youtube videos to MP3 file format.

Pros:

● Ease to use with user-friendly interface

● Useful for creating webinars and presentations

● Available free of cost

Cons:

● Not ideal for other websites

Rating:

3.5 star/5 star

Features:

● aTube Catcher supports all Window version

● This tool will allow you to record the screen.

● . It supports various formats like 3GP, AVI, XVID, MP4, and other formats to convert videos into.

Wondershare Filmora Video Editor

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Requirements:

Microsoft Windows 10 (64-bit),

Microsoft Windows 8 (64-bit)

Apple: macOS 11 Big Sur, macOS 10.15 Catalina, macOS 10.14 Mojave, macOS 10.13 High Sierra

Pros:

● Easy to use interface

● Supports both Windows and Mac OS

● By choosing a tool, you can explore your creativity

Cons:

● Not found yet

Rating:

5star/ 5star

Features:

● Filmora includes several video editing option which makes it preferred and ideal tool for video editing purposes.

4K video downloader

This tool allows downloading and converting videos, channels, sub-titles, playlists, and more from various sites.

Pros:

● Easy to use interface

● Multi-platform Compatibility

● You can also download virtual reality videos

Cons:

● Not available free of cost

Rating

4.7 star/ 5star

Features:

● After activating the tool’s smart mode, you will receive a faster downloading speed.

02Comparison of Tools to Convert YouTube to Mp3

Tools	Rating	Rating	Platforms	Category
Pulltube	4 star	Online	Windows and MacOS	Youtube converter
Snapdownloader	5 star	Desktop	Windows and Mac OS	Youtube to MP3 Converter
Go-MP3	5 star	Online	Web-based	YouTube to MP3 Converter
VideoProc	4.5 star	Desktop	Windows and Mac	Video Audio converter, Editor, Downloader
Leawo Prof. Media 11	5 star	Desktop	Windows and Mac	11-in-1 media converter
aTube Catcher	3.5 star	Desktop	Windows	Window downloader /screen recorder
Filmora	5 star	Desktop	Windows and Mac Os	Video Audio converter , Editor, Downloader
4K video downloader	4.7 star	Desktop	Windows and Mac OS	Youtube to MP3 Converter

Key Takeaways from This Episode

● The need of converting YouTube to MP3 occurs many times and we think we have made you all well-versed with the topic now.

● If you still have any doubts or suggestions, do let us know by dropping a comment in the box given below.

Try It Free Try It Free

In this article, we will examine the Youtube to Mp3 Converter Review through which you can select the appropriate convert; to avail yourself of a hassle-free audio listening experience.

Part 1 What is a YouTube to MP3 converter?

01The Definitive Guide to YouTube to MP3

How to Convert YouTube to MP3 by an Online YouTube to MP3 Tool

● It would help of you went to “ Get ytMP3 tool “ by clicking on YouTube to Mp3 Converter (ytmp3.cc)

● In this step, you have to copy the track URL from Youtube and paste it into the box available. After pasting the “URL,” you ought to click on the “Convert” button available.

● After converting the Youtube videos, you can listen to the audio offline, and converted MP3 file format guarantees flawless audio quality.

How to Convert YouTube to MP3 by a Video Converter

If you want to convert the Youtube to MP3 files using the video converter, all you have to do is to follow the easy steps listed below

● You need to download and install your preferred converter on your computer available online.

● Now go to your favorite Youtube videos and copy the link file link available on the address bar.

● When the downloading process gets completed, you have to click on the finished option available at the top of the window to get the audio file.

02Why Is Mp3 The Popular Audio Format?

Part 2 YouTube and MP3 Video Formats

Part 3 Benefits of YouTube to Mp3 Conversion tools

Some of the significant benefits of Youtube to MP3 conversion tools are listed below:

● The primary benefit of using the tool is that it is a one-time task of converting the files, and then you can keep the converted audio forever on your computer.

● The converted file is compatible with the MP3 file format and runs without internet connectivity.

● By choosing the Youtube to MP3 converter tool, you will extract the particular part of the videos and use them as per your requirements, like setting your phone ringtone.

Part 4 8 Best Free YouTube To MP3 Converters to Convert

01The best YouTube to MP3 converters

After understanding the advantages of the converter tools, we will discuss Youtube to mp3 converter reviews which help you to the appropriate tool as per your requirement.

Pulltube

It is one of the most popular and reliable converter tools to download and trim videos from Youtube.

Operating System: 10.12

Pros:

● Can crop and trim video easily

● Exotic interface

● Good performance

Cons:

● Limed format option available

● Not available free of cost

Rating:

4 star/5 star

Features:

● You can use the Pulltube tools to extract audio from over 1000 sites, including Daily Motion, Facebook, and much more.

● You can extract particular audio from the movies.

Snapdownloader

It is recognized as one of the best converter tools for downloading and converting Youtube videos into MP3 and MP4 format.

Operating System: 10.12

Pros:

● Ease to use with user-friendly interface

● Download multiple videos from a different website

● Support both Windows and Mac OS.

Cons:

● Not available free of cost for a lifetime

Rating:

5 star/5 star

Features:

● You can use the Snapdownloader tools to extract audio from around 900 websites.

● Fast downloading speed.

GO-MP3

Go-MP3 is a free online converter tool available for downloading unlimited videos from YouTube to MP3 at high speeds

Operating System: 10.12

Pros:

● Ease to use with user-friendly interface

● Available free of cost completely

● Unlimited Download.

Cons:

● Only support MP3 format

Rating:

5 star/5 star

Features:

● You can efficiently extract the audio file from Youtube without registering on the site.

● Fast downloading speed.

● No cluster and advertisement.

VideoProc

VideoProc is an ideal converter tool for converting Youtube videos into different audio and video formats at a GPU-accelerated speed.

Pros:

● Ease to use with user-friendly interface

● Available free of cost completely

● Unlimited Download.

Cons:

● For larger file extraction, you need to choose the paid version of the tool.

Rating:

4.5 star/5 star

Features:

● Support all popular/rare formats and codecs.

● Fast downloading speed.

Leawo Prof. Media 11

Pros:

● Ease to use with user-friendly interface

● 1-click burning of ISO image file

● Adjust audio and video parameters.

Cons:

● Not available free of cost for a complete package

Rating:

5 star/5 star

Features:

● Supports; more than 180 formats for the conversion.

● Fast downloading speed.

aTube Catcher

aTube Catcher is an ideal free desktop application that converts Youtube videos to MP3 file format.

Pros:

● Ease to use with user-friendly interface

● Useful for creating webinars and presentations

● Available free of cost

Cons:

● Not ideal for other websites

Rating:

3.5 star/5 star

Features:

● aTube Catcher supports all Window version

● This tool will allow you to record the screen.

● . It supports various formats like 3GP, AVI, XVID, MP4, and other formats to convert videos into.

Wondershare Filmora Video Editor

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Requirements:

Microsoft Windows 10 (64-bit),

Microsoft Windows 8 (64-bit)

Apple: macOS 11 Big Sur, macOS 10.15 Catalina, macOS 10.14 Mojave, macOS 10.13 High Sierra

Pros:

● Easy to use interface

● Supports both Windows and Mac OS

● By choosing a tool, you can explore your creativity

Cons:

● Not found yet

Rating:

5star/ 5star

Features:

● Filmora includes several video editing option which makes it preferred and ideal tool for video editing purposes.

4K video downloader

This tool allows downloading and converting videos, channels, sub-titles, playlists, and more from various sites.

Pros:

● Easy to use interface

● Multi-platform Compatibility

● You can also download virtual reality videos

Cons:

● Not available free of cost

Rating

4.7 star/ 5star

Features:

● After activating the tool’s smart mode, you will receive a faster downloading speed.

02Comparison of Tools to Convert YouTube to Mp3

Tools	Rating	Rating	Platforms	Category
Pulltube	4 star	Online	Windows and MacOS	Youtube converter
Snapdownloader	5 star	Desktop	Windows and Mac OS	Youtube to MP3 Converter
Go-MP3	5 star	Online	Web-based	YouTube to MP3 Converter
VideoProc	4.5 star	Desktop	Windows and Mac	Video Audio converter, Editor, Downloader
Leawo Prof. Media 11	5 star	Desktop	Windows and Mac	11-in-1 media converter
aTube Catcher	3.5 star	Desktop	Windows	Window downloader /screen recorder
Filmora	5 star	Desktop	Windows and Mac Os	Video Audio converter , Editor, Downloader
4K video downloader	4.7 star	Desktop	Windows and Mac OS	Youtube to MP3 Converter

Key Takeaways from This Episode

● The need of converting YouTube to MP3 occurs many times and we think we have made you all well-versed with the topic now.

● If you still have any doubts or suggestions, do let us know by dropping a comment in the box given below.

Try It Free Try It Free

In this article, we will examine the Youtube to Mp3 Converter Review through which you can select the appropriate convert; to avail yourself of a hassle-free audio listening experience.

Part 1 What is a YouTube to MP3 converter?

01The Definitive Guide to YouTube to MP3

How to Convert YouTube to MP3 by an Online YouTube to MP3 Tool

● It would help of you went to “ Get ytMP3 tool “ by clicking on YouTube to Mp3 Converter (ytmp3.cc)

● In this step, you have to copy the track URL from Youtube and paste it into the box available. After pasting the “URL,” you ought to click on the “Convert” button available.

● After converting the Youtube videos, you can listen to the audio offline, and converted MP3 file format guarantees flawless audio quality.

How to Convert YouTube to MP3 by a Video Converter

If you want to convert the Youtube to MP3 files using the video converter, all you have to do is to follow the easy steps listed below

● You need to download and install your preferred converter on your computer available online.

● Now go to your favorite Youtube videos and copy the link file link available on the address bar.

● When the downloading process gets completed, you have to click on the finished option available at the top of the window to get the audio file.

02Why Is Mp3 The Popular Audio Format?

Part 2 YouTube and MP3 Video Formats

Part 3 Benefits of YouTube to Mp3 Conversion tools

Some of the significant benefits of Youtube to MP3 conversion tools are listed below:

● The primary benefit of using the tool is that it is a one-time task of converting the files, and then you can keep the converted audio forever on your computer.

● The converted file is compatible with the MP3 file format and runs without internet connectivity.

● By choosing the Youtube to MP3 converter tool, you will extract the particular part of the videos and use them as per your requirements, like setting your phone ringtone.

Part 4 8 Best Free YouTube To MP3 Converters to Convert

01The best YouTube to MP3 converters

After understanding the advantages of the converter tools, we will discuss Youtube to mp3 converter reviews which help you to the appropriate tool as per your requirement.

Pulltube

It is one of the most popular and reliable converter tools to download and trim videos from Youtube.

Operating System: 10.12

Pros:

● Can crop and trim video easily

● Exotic interface

● Good performance

Cons:

● Limed format option available

● Not available free of cost

Rating:

4 star/5 star

Features:

● You can use the Pulltube tools to extract audio from over 1000 sites, including Daily Motion, Facebook, and much more.

● You can extract particular audio from the movies.

Snapdownloader

It is recognized as one of the best converter tools for downloading and converting Youtube videos into MP3 and MP4 format.

Operating System: 10.12

Pros:

● Ease to use with user-friendly interface

● Download multiple videos from a different website

● Support both Windows and Mac OS.

Cons:

● Not available free of cost for a lifetime

Rating:

5 star/5 star

Features:

● You can use the Snapdownloader tools to extract audio from around 900 websites.

● Fast downloading speed.

GO-MP3

Go-MP3 is a free online converter tool available for downloading unlimited videos from YouTube to MP3 at high speeds

Operating System: 10.12

Pros:

● Ease to use with user-friendly interface

● Available free of cost completely

● Unlimited Download.

Cons:

● Only support MP3 format

Rating:

5 star/5 star

Features:

● You can efficiently extract the audio file from Youtube without registering on the site.

● Fast downloading speed.

● No cluster and advertisement.

VideoProc

VideoProc is an ideal converter tool for converting Youtube videos into different audio and video formats at a GPU-accelerated speed.

Pros:

● Ease to use with user-friendly interface

● Available free of cost completely

● Unlimited Download.

Cons:

● For larger file extraction, you need to choose the paid version of the tool.

Rating:

4.5 star/5 star

Features:

● Support all popular/rare formats and codecs.

● Fast downloading speed.

Leawo Prof. Media 11

Pros:

● Ease to use with user-friendly interface

● 1-click burning of ISO image file

● Adjust audio and video parameters.

Cons:

● Not available free of cost for a complete package

Rating:

5 star/5 star

Features:

● Supports; more than 180 formats for the conversion.

● Fast downloading speed.

aTube Catcher

aTube Catcher is an ideal free desktop application that converts Youtube videos to MP3 file format.

Pros:

● Ease to use with user-friendly interface

● Useful for creating webinars and presentations

● Available free of cost

Cons:

● Not ideal for other websites

Rating:

3.5 star/5 star

Features:

● aTube Catcher supports all Window version

● This tool will allow you to record the screen.

● . It supports various formats like 3GP, AVI, XVID, MP4, and other formats to convert videos into.

Wondershare Filmora Video Editor

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Requirements:

Microsoft Windows 10 (64-bit),

Microsoft Windows 8 (64-bit)

Apple: macOS 11 Big Sur, macOS 10.15 Catalina, macOS 10.14 Mojave, macOS 10.13 High Sierra

Pros:

● Easy to use interface

● Supports both Windows and Mac OS

● By choosing a tool, you can explore your creativity

Cons:

● Not found yet

Rating:

5star/ 5star

Features:

● Filmora includes several video editing option which makes it preferred and ideal tool for video editing purposes.

4K video downloader

This tool allows downloading and converting videos, channels, sub-titles, playlists, and more from various sites.

Pros:

● Easy to use interface

● Multi-platform Compatibility

● You can also download virtual reality videos

Cons:

● Not available free of cost

Rating

4.7 star/ 5star

Features:

● After activating the tool’s smart mode, you will receive a faster downloading speed.

02Comparison of Tools to Convert YouTube to Mp3

Tools	Rating	Rating	Platforms	Category
Pulltube	4 star	Online	Windows and MacOS	Youtube converter
Snapdownloader	5 star	Desktop	Windows and Mac OS	Youtube to MP3 Converter
Go-MP3	5 star	Online	Web-based	YouTube to MP3 Converter
VideoProc	4.5 star	Desktop	Windows and Mac	Video Audio converter, Editor, Downloader
Leawo Prof. Media 11	5 star	Desktop	Windows and Mac	11-in-1 media converter
aTube Catcher	3.5 star	Desktop	Windows	Window downloader /screen recorder
Filmora	5 star	Desktop	Windows and Mac Os	Video Audio converter , Editor, Downloader
4K video downloader	4.7 star	Desktop	Windows and Mac OS	Youtube to MP3 Converter

Key Takeaways from This Episode

● The need of converting YouTube to MP3 occurs many times and we think we have made you all well-versed with the topic now.

● If you still have any doubts or suggestions, do let us know by dropping a comment in the box given below.

Ai Driven Video Production

The Ultimate Guide to Audio-Video Syncing in Final Cut Pro X 2024

The Ultimate Guide to Audio-Video Syncing in Final Cut Pro X 2024

Practical Guide: How to Sync Audio and Video in Final Cut Pro X 2024

Shanoon Cox

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Shanoon Cox

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Shanoon Cox

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Shanoon Cox

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Make a Statement: How to Create a Perfectly Sized Facebook Video Cover

Ways To Make Sure Your Facebook Video Cover Size Is Perfect

In this article

Part 1 Key Facebook Cover Video Specifications

Part 2 Useful Tips for a Wonderful Cover Video

Part 3 Popular Facebook Cover Video Examples and Templates

Part 4 How to Make Your Facebook Cover Video: The Definitive Guide

Wondershare Filmora

Key Takeaways from This Episode

In this article

Part 1 Key Facebook Cover Video Specifications

Part 2 Useful Tips for a Wonderful Cover Video

Part 3 Popular Facebook Cover Video Examples and Templates

Part 4 How to Make Your Facebook Cover Video: The Definitive Guide

Wondershare Filmora

Key Takeaways from This Episode

In this article

Part 1 Key Facebook Cover Video Specifications

Part 2 Useful Tips for a Wonderful Cover Video

Part 3 Popular Facebook Cover Video Examples and Templates

Part 4 How to Make Your Facebook Cover Video: The Definitive Guide

Wondershare Filmora

Key Takeaways from This Episode

In this article

Part 1 Key Facebook Cover Video Specifications

Part 2 Useful Tips for a Wonderful Cover Video

Part 3 Popular Facebook Cover Video Examples and Templates

Part 4 How to Make Your Facebook Cover Video: The Definitive Guide

Wondershare Filmora

Key Takeaways from This Episode

FCPX Visual Effects: Freeze Frames, Slow Motion, and Advanced Editing

Final Cut Pro X: Freeze-Frames and Slow Motion

Benjamin Arango

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

2. HOLD FRAME

3. SLOW (or FAST) MOTION

4. EXTRA CREDIT

SUMMARY

Benjamin Arango

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

2. HOLD FRAME

3. SLOW (or FAST) MOTION

4. EXTRA CREDIT

SUMMARY

Benjamin Arango

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

2. HOLD FRAME

3. SLOW (or FAST) MOTION

4. EXTRA CREDIT

SUMMARY

Benjamin Arango

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES