:max_bytes(150000):strip_icc():format(webp)/GettyImages-538600261-56c643115f9b5879cc3d6bde.jpg)
Updated 2024 Approved Get a Grip on Your Footage Stabilizing Video in After Effects
Get a Grip on Your Footage: Stabilizing Video in After Effects
Stabilize Shaky Videos After Recording Easily
Wondershare Filmora is one of the most popular video editing software among YouTubers , which provides the video stabilization tool to remove shake from videos within one-click. Download and have a try now.
Video content is becoming increasingly popular; with the proliferation of online content, practically every product now needs its mini-documentary or video clip. Experienced filmmakers and VFX artists used to be the only ones who could get smooth footage. Those days, however, are over.
Adobe After Effects is an excellent tool for smoothing out video footage, in addition to being a great blending and motion animation software; although it’s usually preferable to maintain your film as seamless as possible on location, it’s not the end of the world if you take a seat to edit your video and decide it’s too shaky. In truth, there are several options available to you. In After Effects, there are three options for stabilizing footage. What are they – and how to use After Effects to stabilize footage? Let’s find out!
In this article
01 Stabilize Video with Built-in Warp Stabilizer in AE
02 Stabilize Shaky Video with Track Motion Feature in AE
03 Using Stabilization Plugins for Smoother Video in AE
Part 1: Stabilize Video with Built-in Warp Stabilizer in AE
The Warp Stabilizer effect is a new technique to cope with unsteady video. In this part, I will show you how to apply Warp Stabilizer to a layer, adjust the effect’s essential parameters, and demonstrate how they work briefly.
Step 1: The Warp Stabilizer is the most excellent built-in choice for After Effects. This may be found under the Distort tools section of the Effects & Presets panel. You may also go to the effects tab and look for “Warp“ in the search box.
Step 2: When you’ve identified Warp Stabilizer, you’ll have to add it to the layer you want to stabilize. You may accomplish this in one of three different ways. You may either drag and drop the filter into the chosen layer in the composing window, place it on the desired layer in the timeline, or double-tap on the effect while selecting your choice footage layer.
Step 3: Once you apply the warp stabilizer, it will start immediately. So now, all you have to do is lay back and let the stabilizer do its job.
(Note: The procedure should take no more than a few minutes, and a blue bar will appear across your composition window, indicating that the warp stabilizer is evaluating the film. The composition panel would then display an orange bar, indicating that the effect is applied).
Step 4: After stabilization, use the spacebar to begin a RAM peek. Choose the layer you added to and click to display the drop-down menu or go to the Effects Control panel whenever you need to tweak the stabilizing effect.
Part 2: Stabilize Shaky Video with Track Motion Feature in AE
Using Stabilize Motion feature to stabilize video is an old-school heritage function from the era of the Creative Suite, it will still be there in After Effects presently and performs admirably.
Step 1: The tracker panel is most likely open by default in your edition of After Effects, but if it isn’t, go to Window in the top menu to open it. Once you’ve arrived here, scroll to the bottom until you locate Tracker and double-check that it has a checkbox beside it.
Step 2: Select Stabilize Motion from the drop-down menu whenever the tracker panel is open. You’ll see that a tracker box appears in your Layer Panel once you’ve done this.
(Note: You’ll need to identify a proper location in your film for the tracker to operate at this stage. We’re monitoring a vehicle using a camera operator’s drone in the instance below).
Step 3: Let’s press the Play button on the tracker panel once we’ve set up the tracker box. The tracker box should adhere to the location or item you chose when you do this.
(Note: When your tracking points start to go astray, use the Pause button, personally modify the tracking point, and then push play to resume the journey).
Step 4: When the tracker is done and satisfied with the results, click Edit target to verify that the tracking data is transferred to the correct layer. Then proceed to the bottom of the page and click the Apply option.
(Note A dialogue window with choices for applying them. Usually, you’ll want to choose X and Y here).
Hit the spacebar to evaluate how well the stabilize motion tracker performed now when you’re back in the composition window. When you’re not pleased with the outcomes, you might have to go back to try again. Although this approach is best used for photos with a clear point of focus that doesn’t go out of frame, it could still be helpful in some situations.
Part 3: Using Stabilization Plugins for Smoother Video in AE
As a graphic and motion designer, animator, or 3D artist, After Effects plugins may completely change the way you operate. Since it can handle so much right out of the box, Adobe After Effects CC is already a go-to motion graphic and compositing program for many artists.
However, as with any good program, third-party plugins could only help you take your work to the next level by adding new features or streamlining your process.
It should be unsurprising that After Effects has many plugins for a program that is over 30 years old. Here are the best stabilization plugins for smoother video in AE:
1. Orb
Orb is focused on generating realistic planets and includes a range of unique features to make planetary creation easy. It utilizes a similar 3D engine to Video Copilot’s great Element 3D plugin, and it employs a similar 3D engine to Video Copilot’s outstanding Element 3D plugin.
You would believe that making planets in 3D is simple —create a circle, add textures, and you’re done! Getting a world to ‘look’ properly, on the other hand, might be more complicated than it appears.
For example, how can the line between night and day be altered in a model of a populated planet such that cities may be visible at night but not during the day?
Although Orb doesn’t work for every planetary picture, this would function for 90% of them and is a helpful previs tool. This is particularly true when used in conjunction with other After Effects plugins or paired with a 3D lens from a 3D program, which may be brought into After Effects with background plates for things like spacecraft.
2. Depth of Field Generator PRO (DOF PRO)
Richard Rosenman’s renowned Photoshop depth of field generator plugin, DOF PRO (Depth of Field Generator PRO), is now downloadable for After Effects. DOF PRO has become the industry’s professional option for an unprecedented and complex depth of field effects rapidly and effectively as a post-process.
This is thanks to almost a decade of discovery and application since the first launch in 2005. DOF PRO’s cutting-edge characteristics offer new and advanced technologies not found anywhere else, resulting in one of the industry’s most potent and sophisticated depth of field processors.
Capability for chromatic and achromatic aberration, focal plane bokeh distinction, astigmatism and vignetting effects, bespoke aperture maps, and noise recovery are among the advanced features.
There will also be compatibility with the alpha channel and transparency, 32-bit floating-point color, correct aperture displays, and an iris array display. A feature comparison between the plugin and After Effects’ Camera Lens Blur effect can be found here.
3. ReelSteady
ReelSteady for After Effects is a recent addition to the stabilization marketplace. ReelSteady is similar to After Effects’ warp stabilizer plugin. However, the stabilization in ReelSteady is far superior.
ReelSteady also has several other features that make it ideal for creating next-level tunes. Users may design filters to block off specific sections of your frame. This is useful for removing a subject that travels around the frame a lot.
In terms of performance, the After Effects plugin is pretty similar to the warp stabilizer but with a few more features. To begin with, ReelSteady includes a built-in rolling shutter repair tool that operates in tandem with its built-in stabilizer.
The ReelSteady effect is a two-pass effect. For instance, after the effect has been executed for the first time, you will likely wish to level out certain places. You’ll successfully isolate specific parts in the effect to “iron out” sections of the footage.
You would like to record your film at a more excellent resolution than your expected outcome to get the most out of ReelSteady. If you wish to output your video in 4K, you might capture it in 4.6K or 5K. You’ll have some leeway for ReelSteady to work its magic.
ReelSteady’s sole flaw is its high price ($399). ReelSteady is not available in After Effects, unlike some of the other choices on this list. ReelSteady, on the other hand, is the way to go if you would like the smoothest footage imaginable.
Conclusion
Shaky video footage would be the last thing any video creator wants unless it’s done intentionally for artistic or creative reasons. As a result, they employ methods and equipment to keep the camera safe from any undesired movement.
However, occasionally those tools aren’t available, and the outcome is questionable. That is why we decided to compile this article to add to the knowledge of our readers how they can use After Effects to stabilize videos to enhance their video content!
Video content is becoming increasingly popular; with the proliferation of online content, practically every product now needs its mini-documentary or video clip. Experienced filmmakers and VFX artists used to be the only ones who could get smooth footage. Those days, however, are over.
Adobe After Effects is an excellent tool for smoothing out video footage, in addition to being a great blending and motion animation software; although it’s usually preferable to maintain your film as seamless as possible on location, it’s not the end of the world if you take a seat to edit your video and decide it’s too shaky. In truth, there are several options available to you. In After Effects, there are three options for stabilizing footage. What are they – and how to use After Effects to stabilize footage? Let’s find out!
In this article
01 Stabilize Video with Built-in Warp Stabilizer in AE
02 Stabilize Shaky Video with Track Motion Feature in AE
03 Using Stabilization Plugins for Smoother Video in AE
Part 1: Stabilize Video with Built-in Warp Stabilizer in AE
The Warp Stabilizer effect is a new technique to cope with unsteady video. In this part, I will show you how to apply Warp Stabilizer to a layer, adjust the effect’s essential parameters, and demonstrate how they work briefly.
Step 1: The Warp Stabilizer is the most excellent built-in choice for After Effects. This may be found under the Distort tools section of the Effects & Presets panel. You may also go to the effects tab and look for “Warp“ in the search box.
Step 2: When you’ve identified Warp Stabilizer, you’ll have to add it to the layer you want to stabilize. You may accomplish this in one of three different ways. You may either drag and drop the filter into the chosen layer in the composing window, place it on the desired layer in the timeline, or double-tap on the effect while selecting your choice footage layer.
Step 3: Once you apply the warp stabilizer, it will start immediately. So now, all you have to do is lay back and let the stabilizer do its job.
(Note: The procedure should take no more than a few minutes, and a blue bar will appear across your composition window, indicating that the warp stabilizer is evaluating the film. The composition panel would then display an orange bar, indicating that the effect is applied).
Step 4: After stabilization, use the spacebar to begin a RAM peek. Choose the layer you added to and click to display the drop-down menu or go to the Effects Control panel whenever you need to tweak the stabilizing effect.
Part 2: Stabilize Shaky Video with Track Motion Feature in AE
Using Stabilize Motion feature to stabilize video is an old-school heritage function from the era of the Creative Suite, it will still be there in After Effects presently and performs admirably.
Step 1: The tracker panel is most likely open by default in your edition of After Effects, but if it isn’t, go to Window in the top menu to open it. Once you’ve arrived here, scroll to the bottom until you locate Tracker and double-check that it has a checkbox beside it.
Step 2: Select Stabilize Motion from the drop-down menu whenever the tracker panel is open. You’ll see that a tracker box appears in your Layer Panel once you’ve done this.
(Note: You’ll need to identify a proper location in your film for the tracker to operate at this stage. We’re monitoring a vehicle using a camera operator’s drone in the instance below).
Step 3: Let’s press the Play button on the tracker panel once we’ve set up the tracker box. The tracker box should adhere to the location or item you chose when you do this.
(Note: When your tracking points start to go astray, use the Pause button, personally modify the tracking point, and then push play to resume the journey).
Step 4: When the tracker is done and satisfied with the results, click Edit target to verify that the tracking data is transferred to the correct layer. Then proceed to the bottom of the page and click the Apply option.
(Note A dialogue window with choices for applying them. Usually, you’ll want to choose X and Y here).
Hit the spacebar to evaluate how well the stabilize motion tracker performed now when you’re back in the composition window. When you’re not pleased with the outcomes, you might have to go back to try again. Although this approach is best used for photos with a clear point of focus that doesn’t go out of frame, it could still be helpful in some situations.
Part 3: Using Stabilization Plugins for Smoother Video in AE
As a graphic and motion designer, animator, or 3D artist, After Effects plugins may completely change the way you operate. Since it can handle so much right out of the box, Adobe After Effects CC is already a go-to motion graphic and compositing program for many artists.
However, as with any good program, third-party plugins could only help you take your work to the next level by adding new features or streamlining your process.
It should be unsurprising that After Effects has many plugins for a program that is over 30 years old. Here are the best stabilization plugins for smoother video in AE:
1. Orb
Orb is focused on generating realistic planets and includes a range of unique features to make planetary creation easy. It utilizes a similar 3D engine to Video Copilot’s great Element 3D plugin, and it employs a similar 3D engine to Video Copilot’s outstanding Element 3D plugin.
You would believe that making planets in 3D is simple —create a circle, add textures, and you’re done! Getting a world to ‘look’ properly, on the other hand, might be more complicated than it appears.
For example, how can the line between night and day be altered in a model of a populated planet such that cities may be visible at night but not during the day?
Although Orb doesn’t work for every planetary picture, this would function for 90% of them and is a helpful previs tool. This is particularly true when used in conjunction with other After Effects plugins or paired with a 3D lens from a 3D program, which may be brought into After Effects with background plates for things like spacecraft.
2. Depth of Field Generator PRO (DOF PRO)
Richard Rosenman’s renowned Photoshop depth of field generator plugin, DOF PRO (Depth of Field Generator PRO), is now downloadable for After Effects. DOF PRO has become the industry’s professional option for an unprecedented and complex depth of field effects rapidly and effectively as a post-process.
This is thanks to almost a decade of discovery and application since the first launch in 2005. DOF PRO’s cutting-edge characteristics offer new and advanced technologies not found anywhere else, resulting in one of the industry’s most potent and sophisticated depth of field processors.
Capability for chromatic and achromatic aberration, focal plane bokeh distinction, astigmatism and vignetting effects, bespoke aperture maps, and noise recovery are among the advanced features.
There will also be compatibility with the alpha channel and transparency, 32-bit floating-point color, correct aperture displays, and an iris array display. A feature comparison between the plugin and After Effects’ Camera Lens Blur effect can be found here.
3. ReelSteady
ReelSteady for After Effects is a recent addition to the stabilization marketplace. ReelSteady is similar to After Effects’ warp stabilizer plugin. However, the stabilization in ReelSteady is far superior.
ReelSteady also has several other features that make it ideal for creating next-level tunes. Users may design filters to block off specific sections of your frame. This is useful for removing a subject that travels around the frame a lot.
In terms of performance, the After Effects plugin is pretty similar to the warp stabilizer but with a few more features. To begin with, ReelSteady includes a built-in rolling shutter repair tool that operates in tandem with its built-in stabilizer.
The ReelSteady effect is a two-pass effect. For instance, after the effect has been executed for the first time, you will likely wish to level out certain places. You’ll successfully isolate specific parts in the effect to “iron out” sections of the footage.
You would like to record your film at a more excellent resolution than your expected outcome to get the most out of ReelSteady. If you wish to output your video in 4K, you might capture it in 4.6K or 5K. You’ll have some leeway for ReelSteady to work its magic.
ReelSteady’s sole flaw is its high price ($399). ReelSteady is not available in After Effects, unlike some of the other choices on this list. ReelSteady, on the other hand, is the way to go if you would like the smoothest footage imaginable.
Conclusion
Shaky video footage would be the last thing any video creator wants unless it’s done intentionally for artistic or creative reasons. As a result, they employ methods and equipment to keep the camera safe from any undesired movement.
However, occasionally those tools aren’t available, and the outcome is questionable. That is why we decided to compile this article to add to the knowledge of our readers how they can use After Effects to stabilize videos to enhance their video content!
Video content is becoming increasingly popular; with the proliferation of online content, practically every product now needs its mini-documentary or video clip. Experienced filmmakers and VFX artists used to be the only ones who could get smooth footage. Those days, however, are over.
Adobe After Effects is an excellent tool for smoothing out video footage, in addition to being a great blending and motion animation software; although it’s usually preferable to maintain your film as seamless as possible on location, it’s not the end of the world if you take a seat to edit your video and decide it’s too shaky. In truth, there are several options available to you. In After Effects, there are three options for stabilizing footage. What are they – and how to use After Effects to stabilize footage? Let’s find out!
In this article
01 Stabilize Video with Built-in Warp Stabilizer in AE
02 Stabilize Shaky Video with Track Motion Feature in AE
03 Using Stabilization Plugins for Smoother Video in AE
Part 1: Stabilize Video with Built-in Warp Stabilizer in AE
The Warp Stabilizer effect is a new technique to cope with unsteady video. In this part, I will show you how to apply Warp Stabilizer to a layer, adjust the effect’s essential parameters, and demonstrate how they work briefly.
Step 1: The Warp Stabilizer is the most excellent built-in choice for After Effects. This may be found under the Distort tools section of the Effects & Presets panel. You may also go to the effects tab and look for “Warp“ in the search box.
Step 2: When you’ve identified Warp Stabilizer, you’ll have to add it to the layer you want to stabilize. You may accomplish this in one of three different ways. You may either drag and drop the filter into the chosen layer in the composing window, place it on the desired layer in the timeline, or double-tap on the effect while selecting your choice footage layer.
Step 3: Once you apply the warp stabilizer, it will start immediately. So now, all you have to do is lay back and let the stabilizer do its job.
(Note: The procedure should take no more than a few minutes, and a blue bar will appear across your composition window, indicating that the warp stabilizer is evaluating the film. The composition panel would then display an orange bar, indicating that the effect is applied).
Step 4: After stabilization, use the spacebar to begin a RAM peek. Choose the layer you added to and click to display the drop-down menu or go to the Effects Control panel whenever you need to tweak the stabilizing effect.
Part 2: Stabilize Shaky Video with Track Motion Feature in AE
Using Stabilize Motion feature to stabilize video is an old-school heritage function from the era of the Creative Suite, it will still be there in After Effects presently and performs admirably.
Step 1: The tracker panel is most likely open by default in your edition of After Effects, but if it isn’t, go to Window in the top menu to open it. Once you’ve arrived here, scroll to the bottom until you locate Tracker and double-check that it has a checkbox beside it.
Step 2: Select Stabilize Motion from the drop-down menu whenever the tracker panel is open. You’ll see that a tracker box appears in your Layer Panel once you’ve done this.
(Note: You’ll need to identify a proper location in your film for the tracker to operate at this stage. We’re monitoring a vehicle using a camera operator’s drone in the instance below).
Step 3: Let’s press the Play button on the tracker panel once we’ve set up the tracker box. The tracker box should adhere to the location or item you chose when you do this.
(Note: When your tracking points start to go astray, use the Pause button, personally modify the tracking point, and then push play to resume the journey).
Step 4: When the tracker is done and satisfied with the results, click Edit target to verify that the tracking data is transferred to the correct layer. Then proceed to the bottom of the page and click the Apply option.
(Note A dialogue window with choices for applying them. Usually, you’ll want to choose X and Y here).
Hit the spacebar to evaluate how well the stabilize motion tracker performed now when you’re back in the composition window. When you’re not pleased with the outcomes, you might have to go back to try again. Although this approach is best used for photos with a clear point of focus that doesn’t go out of frame, it could still be helpful in some situations.
Part 3: Using Stabilization Plugins for Smoother Video in AE
As a graphic and motion designer, animator, or 3D artist, After Effects plugins may completely change the way you operate. Since it can handle so much right out of the box, Adobe After Effects CC is already a go-to motion graphic and compositing program for many artists.
However, as with any good program, third-party plugins could only help you take your work to the next level by adding new features or streamlining your process.
It should be unsurprising that After Effects has many plugins for a program that is over 30 years old. Here are the best stabilization plugins for smoother video in AE:
1. Orb
Orb is focused on generating realistic planets and includes a range of unique features to make planetary creation easy. It utilizes a similar 3D engine to Video Copilot’s great Element 3D plugin, and it employs a similar 3D engine to Video Copilot’s outstanding Element 3D plugin.
You would believe that making planets in 3D is simple —create a circle, add textures, and you’re done! Getting a world to ‘look’ properly, on the other hand, might be more complicated than it appears.
For example, how can the line between night and day be altered in a model of a populated planet such that cities may be visible at night but not during the day?
Although Orb doesn’t work for every planetary picture, this would function for 90% of them and is a helpful previs tool. This is particularly true when used in conjunction with other After Effects plugins or paired with a 3D lens from a 3D program, which may be brought into After Effects with background plates for things like spacecraft.
2. Depth of Field Generator PRO (DOF PRO)
Richard Rosenman’s renowned Photoshop depth of field generator plugin, DOF PRO (Depth of Field Generator PRO), is now downloadable for After Effects. DOF PRO has become the industry’s professional option for an unprecedented and complex depth of field effects rapidly and effectively as a post-process.
This is thanks to almost a decade of discovery and application since the first launch in 2005. DOF PRO’s cutting-edge characteristics offer new and advanced technologies not found anywhere else, resulting in one of the industry’s most potent and sophisticated depth of field processors.
Capability for chromatic and achromatic aberration, focal plane bokeh distinction, astigmatism and vignetting effects, bespoke aperture maps, and noise recovery are among the advanced features.
There will also be compatibility with the alpha channel and transparency, 32-bit floating-point color, correct aperture displays, and an iris array display. A feature comparison between the plugin and After Effects’ Camera Lens Blur effect can be found here.
3. ReelSteady
ReelSteady for After Effects is a recent addition to the stabilization marketplace. ReelSteady is similar to After Effects’ warp stabilizer plugin. However, the stabilization in ReelSteady is far superior.
ReelSteady also has several other features that make it ideal for creating next-level tunes. Users may design filters to block off specific sections of your frame. This is useful for removing a subject that travels around the frame a lot.
In terms of performance, the After Effects plugin is pretty similar to the warp stabilizer but with a few more features. To begin with, ReelSteady includes a built-in rolling shutter repair tool that operates in tandem with its built-in stabilizer.
The ReelSteady effect is a two-pass effect. For instance, after the effect has been executed for the first time, you will likely wish to level out certain places. You’ll successfully isolate specific parts in the effect to “iron out” sections of the footage.
You would like to record your film at a more excellent resolution than your expected outcome to get the most out of ReelSteady. If you wish to output your video in 4K, you might capture it in 4.6K or 5K. You’ll have some leeway for ReelSteady to work its magic.
ReelSteady’s sole flaw is its high price ($399). ReelSteady is not available in After Effects, unlike some of the other choices on this list. ReelSteady, on the other hand, is the way to go if you would like the smoothest footage imaginable.
Conclusion
Shaky video footage would be the last thing any video creator wants unless it’s done intentionally for artistic or creative reasons. As a result, they employ methods and equipment to keep the camera safe from any undesired movement.
However, occasionally those tools aren’t available, and the outcome is questionable. That is why we decided to compile this article to add to the knowledge of our readers how they can use After Effects to stabilize videos to enhance their video content!
Video content is becoming increasingly popular; with the proliferation of online content, practically every product now needs its mini-documentary or video clip. Experienced filmmakers and VFX artists used to be the only ones who could get smooth footage. Those days, however, are over.
Adobe After Effects is an excellent tool for smoothing out video footage, in addition to being a great blending and motion animation software; although it’s usually preferable to maintain your film as seamless as possible on location, it’s not the end of the world if you take a seat to edit your video and decide it’s too shaky. In truth, there are several options available to you. In After Effects, there are three options for stabilizing footage. What are they – and how to use After Effects to stabilize footage? Let’s find out!
In this article
01 Stabilize Video with Built-in Warp Stabilizer in AE
02 Stabilize Shaky Video with Track Motion Feature in AE
03 Using Stabilization Plugins for Smoother Video in AE
Part 1: Stabilize Video with Built-in Warp Stabilizer in AE
The Warp Stabilizer effect is a new technique to cope with unsteady video. In this part, I will show you how to apply Warp Stabilizer to a layer, adjust the effect’s essential parameters, and demonstrate how they work briefly.
Step 1: The Warp Stabilizer is the most excellent built-in choice for After Effects. This may be found under the Distort tools section of the Effects & Presets panel. You may also go to the effects tab and look for “Warp“ in the search box.
Step 2: When you’ve identified Warp Stabilizer, you’ll have to add it to the layer you want to stabilize. You may accomplish this in one of three different ways. You may either drag and drop the filter into the chosen layer in the composing window, place it on the desired layer in the timeline, or double-tap on the effect while selecting your choice footage layer.
Step 3: Once you apply the warp stabilizer, it will start immediately. So now, all you have to do is lay back and let the stabilizer do its job.
(Note: The procedure should take no more than a few minutes, and a blue bar will appear across your composition window, indicating that the warp stabilizer is evaluating the film. The composition panel would then display an orange bar, indicating that the effect is applied).
Step 4: After stabilization, use the spacebar to begin a RAM peek. Choose the layer you added to and click to display the drop-down menu or go to the Effects Control panel whenever you need to tweak the stabilizing effect.
Part 2: Stabilize Shaky Video with Track Motion Feature in AE
Using Stabilize Motion feature to stabilize video is an old-school heritage function from the era of the Creative Suite, it will still be there in After Effects presently and performs admirably.
Step 1: The tracker panel is most likely open by default in your edition of After Effects, but if it isn’t, go to Window in the top menu to open it. Once you’ve arrived here, scroll to the bottom until you locate Tracker and double-check that it has a checkbox beside it.
Step 2: Select Stabilize Motion from the drop-down menu whenever the tracker panel is open. You’ll see that a tracker box appears in your Layer Panel once you’ve done this.
(Note: You’ll need to identify a proper location in your film for the tracker to operate at this stage. We’re monitoring a vehicle using a camera operator’s drone in the instance below).
Step 3: Let’s press the Play button on the tracker panel once we’ve set up the tracker box. The tracker box should adhere to the location or item you chose when you do this.
(Note: When your tracking points start to go astray, use the Pause button, personally modify the tracking point, and then push play to resume the journey).
Step 4: When the tracker is done and satisfied with the results, click Edit target to verify that the tracking data is transferred to the correct layer. Then proceed to the bottom of the page and click the Apply option.
(Note A dialogue window with choices for applying them. Usually, you’ll want to choose X and Y here).
Hit the spacebar to evaluate how well the stabilize motion tracker performed now when you’re back in the composition window. When you’re not pleased with the outcomes, you might have to go back to try again. Although this approach is best used for photos with a clear point of focus that doesn’t go out of frame, it could still be helpful in some situations.
Part 3: Using Stabilization Plugins for Smoother Video in AE
As a graphic and motion designer, animator, or 3D artist, After Effects plugins may completely change the way you operate. Since it can handle so much right out of the box, Adobe After Effects CC is already a go-to motion graphic and compositing program for many artists.
However, as with any good program, third-party plugins could only help you take your work to the next level by adding new features or streamlining your process.
It should be unsurprising that After Effects has many plugins for a program that is over 30 years old. Here are the best stabilization plugins for smoother video in AE:
1. Orb
Orb is focused on generating realistic planets and includes a range of unique features to make planetary creation easy. It utilizes a similar 3D engine to Video Copilot’s great Element 3D plugin, and it employs a similar 3D engine to Video Copilot’s outstanding Element 3D plugin.
You would believe that making planets in 3D is simple —create a circle, add textures, and you’re done! Getting a world to ‘look’ properly, on the other hand, might be more complicated than it appears.
For example, how can the line between night and day be altered in a model of a populated planet such that cities may be visible at night but not during the day?
Although Orb doesn’t work for every planetary picture, this would function for 90% of them and is a helpful previs tool. This is particularly true when used in conjunction with other After Effects plugins or paired with a 3D lens from a 3D program, which may be brought into After Effects with background plates for things like spacecraft.
2. Depth of Field Generator PRO (DOF PRO)
Richard Rosenman’s renowned Photoshop depth of field generator plugin, DOF PRO (Depth of Field Generator PRO), is now downloadable for After Effects. DOF PRO has become the industry’s professional option for an unprecedented and complex depth of field effects rapidly and effectively as a post-process.
This is thanks to almost a decade of discovery and application since the first launch in 2005. DOF PRO’s cutting-edge characteristics offer new and advanced technologies not found anywhere else, resulting in one of the industry’s most potent and sophisticated depth of field processors.
Capability for chromatic and achromatic aberration, focal plane bokeh distinction, astigmatism and vignetting effects, bespoke aperture maps, and noise recovery are among the advanced features.
There will also be compatibility with the alpha channel and transparency, 32-bit floating-point color, correct aperture displays, and an iris array display. A feature comparison between the plugin and After Effects’ Camera Lens Blur effect can be found here.
3. ReelSteady
ReelSteady for After Effects is a recent addition to the stabilization marketplace. ReelSteady is similar to After Effects’ warp stabilizer plugin. However, the stabilization in ReelSteady is far superior.
ReelSteady also has several other features that make it ideal for creating next-level tunes. Users may design filters to block off specific sections of your frame. This is useful for removing a subject that travels around the frame a lot.
In terms of performance, the After Effects plugin is pretty similar to the warp stabilizer but with a few more features. To begin with, ReelSteady includes a built-in rolling shutter repair tool that operates in tandem with its built-in stabilizer.
The ReelSteady effect is a two-pass effect. For instance, after the effect has been executed for the first time, you will likely wish to level out certain places. You’ll successfully isolate specific parts in the effect to “iron out” sections of the footage.
You would like to record your film at a more excellent resolution than your expected outcome to get the most out of ReelSteady. If you wish to output your video in 4K, you might capture it in 4.6K or 5K. You’ll have some leeway for ReelSteady to work its magic.
ReelSteady’s sole flaw is its high price ($399). ReelSteady is not available in After Effects, unlike some of the other choices on this list. ReelSteady, on the other hand, is the way to go if you would like the smoothest footage imaginable.
Conclusion
Shaky video footage would be the last thing any video creator wants unless it’s done intentionally for artistic or creative reasons. As a result, they employ methods and equipment to keep the camera safe from any undesired movement.
However, occasionally those tools aren’t available, and the outcome is questionable. That is why we decided to compile this article to add to the knowledge of our readers how they can use After Effects to stabilize videos to enhance their video content!
Transform Your Clips: 2 Simple Methods for Creating Time Lapse Masterpieces
Time Lapse Software: Create Time Lapse Video
Ollie Mattison
Mar 27, 2024• Proven solutions
You may have seen some time lapse videos already. A sunset motion, flower blooming, traffic and city lights and more time lapse videos. Time lapse is an amazing technique often used to make everything in the video seems moving much faster than in real life, like speed up a video clip and give the illusion of compressed time.
If you have a GoPro Hero 5 Black action camera, check our article abouthow to shoot a time-lapse video with GoPro.
Some phones also allow you to shoot time-lapse video , but we recommend you to use a good camera and video editing software to make better time lapse videos. If you are looking for a time lapse software to make a time lapse video, we recommend Filmora video editor , which is easy to use on both Windows PC and Mac. How to create a time-lapse video with Filmora? Download the software and follow the step-by-step tutorial below.
In this article, we will introduce two methods of creating time lapse video in Filmora:
With built-in slow/fast motion effects, you can use Filmora to make time lapse effects in drag-and-drop. If you want to add filters to your video, Filmora offers more than 150 free filters to use. Check the new features of Filmora to empower your imagination. Download it to have a try!
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Before we get started, we have summarized some tips for shooting time-lapse videos, hope that will help to shoot a good video footage. If you have some other tips and tricks about shooting time lapse videos, please share it on the comment below.
Tip 1: Keep the Camera/phone stable with camera stabilizer or tripod.
Tip 2: Make sure there is enough space for shooting time-lapse video. Large capacity memory cards are always welcomed.
Tip 3: Charge the battery fully before shooting and prepare a standby battery if you have.
If you wanna make a time lapse video with photos, you need set up your camera to take photos at a proper interval, such as take photo at every five second or use the built-in time lapse shooting settings in your camera. It is recommended to record or take photos for at least 20 minutes because the time lapse video will speed up. OK, now let’s start making the time lapse video:
Tips for Recording Time Lapse Video on iPhone
Method 1: Creating time lapse video from photos
1 Import the original photos to Filmora
After installing and launch Filmora video editor, import the shot time lapse photos to it. Click New Project and then click the Import button to add your photos to the media library. You can also directly drag and drop your video to the program. Then all the imported files will appear as thumbnails in the left of the window.
You can also import the photos from the video shooting device. Just plug in the video camera, click Import from Phone or Camera option in Import menu, and then transfer the target media files to Filmora.
After that, you need to select and drag and drop all the photos to the first video track.
2 Preview the photos
After all your photos are placed in timeline, you can zoom in the timeline or preview it in the Preview window to check if it needs any order adjustment or deletion.
3 Adjust Photo Duration to Create Time lapse Video
Select one of the photos in the timeline and right click on it to select Speed and Duration to open the Custom Speed panel. Go to Duration section, and change the duration of the photo to 00:00:00:01 or other duration based on your needs, and then click OK.
You can also add a background music to make time lapse more professional. You can choose a music sound from the built-in music library or import your own audio file.
4 Export your new video
Place the timeline playhead at the beginner, and play it in Preview window to check the time lapse effects. If everything works fine, click the Export tab and choose the target format and click SETTINGS to output the time lapse video. Here you can change the video format and video and audio parameters such as Bit Rate, Encoder, Resolution and so on.
If you want to save and play your video on iPhone, iPod, iPad and other devices, just switch to the Device tab and choose from the device list. What’s more, you can upload the newly made video file to all popular video sites such as YouTube and Vimeo directly from the interface of Filmora. Or turn to DVD tab to burn your video to DVD for playing on TV.
Method 2: Speed Up to Make a Time lapse Video
In case that you want to make a time lapse video with video footage, below are the step-by-step tutorial:
1 Import Video Footage
Just like importing photos to Filmora, follow the steps to import the video clips to media library.
2 Cut out part of the video for time lapse editing (optional)
Next, drag your video onto the video column in the timeline. Select the loaded video and click the “Play” button. While playing the video, drag the slider bar at the start time and hit the “Split” icon to cut out the part you want to do time lapse editing.
3 Speed up to create time lapse video
Right click on the video clip in the timeline to select Speed and Duration. Then a window will pop up for you to adjust the settings of video. Find the Speed option and drag the slider bar to the right to increase the speed. If you set the playback speed to play at 200% the original speed, then the 30-second clip be only 15 seconds (twice the speed). After that click OK. Click the Play button to preview the result. Filmora now support up to 100x fast mo and 0.01x slow mo.
4 Export your new time lapse video
If you are satisfied with the newly made time lapse video, just click Export to output the video footage.
Conclusion
That’s how to make a cool time lapse video with the time lapse video software Filmora, no matter whether you want to make a time lapse video from photos, or speed up the video to make a time lapse video, you can achieve that with a few clicks.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
You may have seen some time lapse videos already. A sunset motion, flower blooming, traffic and city lights and more time lapse videos. Time lapse is an amazing technique often used to make everything in the video seems moving much faster than in real life, like speed up a video clip and give the illusion of compressed time.
If you have a GoPro Hero 5 Black action camera, check our article abouthow to shoot a time-lapse video with GoPro.
Some phones also allow you to shoot time-lapse video , but we recommend you to use a good camera and video editing software to make better time lapse videos. If you are looking for a time lapse software to make a time lapse video, we recommend Filmora video editor , which is easy to use on both Windows PC and Mac. How to create a time-lapse video with Filmora? Download the software and follow the step-by-step tutorial below.
In this article, we will introduce two methods of creating time lapse video in Filmora:
With built-in slow/fast motion effects, you can use Filmora to make time lapse effects in drag-and-drop. If you want to add filters to your video, Filmora offers more than 150 free filters to use. Check the new features of Filmora to empower your imagination. Download it to have a try!
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Before we get started, we have summarized some tips for shooting time-lapse videos, hope that will help to shoot a good video footage. If you have some other tips and tricks about shooting time lapse videos, please share it on the comment below.
Tip 1: Keep the Camera/phone stable with camera stabilizer or tripod.
Tip 2: Make sure there is enough space for shooting time-lapse video. Large capacity memory cards are always welcomed.
Tip 3: Charge the battery fully before shooting and prepare a standby battery if you have.
If you wanna make a time lapse video with photos, you need set up your camera to take photos at a proper interval, such as take photo at every five second or use the built-in time lapse shooting settings in your camera. It is recommended to record or take photos for at least 20 minutes because the time lapse video will speed up. OK, now let’s start making the time lapse video:
Tips for Recording Time Lapse Video on iPhone
Method 1: Creating time lapse video from photos
1 Import the original photos to Filmora
After installing and launch Filmora video editor, import the shot time lapse photos to it. Click New Project and then click the Import button to add your photos to the media library. You can also directly drag and drop your video to the program. Then all the imported files will appear as thumbnails in the left of the window.
You can also import the photos from the video shooting device. Just plug in the video camera, click Import from Phone or Camera option in Import menu, and then transfer the target media files to Filmora.
After that, you need to select and drag and drop all the photos to the first video track.
2 Preview the photos
After all your photos are placed in timeline, you can zoom in the timeline or preview it in the Preview window to check if it needs any order adjustment or deletion.
3 Adjust Photo Duration to Create Time lapse Video
Select one of the photos in the timeline and right click on it to select Speed and Duration to open the Custom Speed panel. Go to Duration section, and change the duration of the photo to 00:00:00:01 or other duration based on your needs, and then click OK.
You can also add a background music to make time lapse more professional. You can choose a music sound from the built-in music library or import your own audio file.
4 Export your new video
Place the timeline playhead at the beginner, and play it in Preview window to check the time lapse effects. If everything works fine, click the Export tab and choose the target format and click SETTINGS to output the time lapse video. Here you can change the video format and video and audio parameters such as Bit Rate, Encoder, Resolution and so on.
If you want to save and play your video on iPhone, iPod, iPad and other devices, just switch to the Device tab and choose from the device list. What’s more, you can upload the newly made video file to all popular video sites such as YouTube and Vimeo directly from the interface of Filmora. Or turn to DVD tab to burn your video to DVD for playing on TV.
Method 2: Speed Up to Make a Time lapse Video
In case that you want to make a time lapse video with video footage, below are the step-by-step tutorial:
1 Import Video Footage
Just like importing photos to Filmora, follow the steps to import the video clips to media library.
2 Cut out part of the video for time lapse editing (optional)
Next, drag your video onto the video column in the timeline. Select the loaded video and click the “Play” button. While playing the video, drag the slider bar at the start time and hit the “Split” icon to cut out the part you want to do time lapse editing.
3 Speed up to create time lapse video
Right click on the video clip in the timeline to select Speed and Duration. Then a window will pop up for you to adjust the settings of video. Find the Speed option and drag the slider bar to the right to increase the speed. If you set the playback speed to play at 200% the original speed, then the 30-second clip be only 15 seconds (twice the speed). After that click OK. Click the Play button to preview the result. Filmora now support up to 100x fast mo and 0.01x slow mo.
4 Export your new time lapse video
If you are satisfied with the newly made time lapse video, just click Export to output the video footage.
Conclusion
That’s how to make a cool time lapse video with the time lapse video software Filmora, no matter whether you want to make a time lapse video from photos, or speed up the video to make a time lapse video, you can achieve that with a few clicks.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
You may have seen some time lapse videos already. A sunset motion, flower blooming, traffic and city lights and more time lapse videos. Time lapse is an amazing technique often used to make everything in the video seems moving much faster than in real life, like speed up a video clip and give the illusion of compressed time.
If you have a GoPro Hero 5 Black action camera, check our article abouthow to shoot a time-lapse video with GoPro.
Some phones also allow you to shoot time-lapse video , but we recommend you to use a good camera and video editing software to make better time lapse videos. If you are looking for a time lapse software to make a time lapse video, we recommend Filmora video editor , which is easy to use on both Windows PC and Mac. How to create a time-lapse video with Filmora? Download the software and follow the step-by-step tutorial below.
In this article, we will introduce two methods of creating time lapse video in Filmora:
With built-in slow/fast motion effects, you can use Filmora to make time lapse effects in drag-and-drop. If you want to add filters to your video, Filmora offers more than 150 free filters to use. Check the new features of Filmora to empower your imagination. Download it to have a try!
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Before we get started, we have summarized some tips for shooting time-lapse videos, hope that will help to shoot a good video footage. If you have some other tips and tricks about shooting time lapse videos, please share it on the comment below.
Tip 1: Keep the Camera/phone stable with camera stabilizer or tripod.
Tip 2: Make sure there is enough space for shooting time-lapse video. Large capacity memory cards are always welcomed.
Tip 3: Charge the battery fully before shooting and prepare a standby battery if you have.
If you wanna make a time lapse video with photos, you need set up your camera to take photos at a proper interval, such as take photo at every five second or use the built-in time lapse shooting settings in your camera. It is recommended to record or take photos for at least 20 minutes because the time lapse video will speed up. OK, now let’s start making the time lapse video:
Tips for Recording Time Lapse Video on iPhone
Method 1: Creating time lapse video from photos
1 Import the original photos to Filmora
After installing and launch Filmora video editor, import the shot time lapse photos to it. Click New Project and then click the Import button to add your photos to the media library. You can also directly drag and drop your video to the program. Then all the imported files will appear as thumbnails in the left of the window.
You can also import the photos from the video shooting device. Just plug in the video camera, click Import from Phone or Camera option in Import menu, and then transfer the target media files to Filmora.
After that, you need to select and drag and drop all the photos to the first video track.
2 Preview the photos
After all your photos are placed in timeline, you can zoom in the timeline or preview it in the Preview window to check if it needs any order adjustment or deletion.
3 Adjust Photo Duration to Create Time lapse Video
Select one of the photos in the timeline and right click on it to select Speed and Duration to open the Custom Speed panel. Go to Duration section, and change the duration of the photo to 00:00:00:01 or other duration based on your needs, and then click OK.
You can also add a background music to make time lapse more professional. You can choose a music sound from the built-in music library or import your own audio file.
4 Export your new video
Place the timeline playhead at the beginner, and play it in Preview window to check the time lapse effects. If everything works fine, click the Export tab and choose the target format and click SETTINGS to output the time lapse video. Here you can change the video format and video and audio parameters such as Bit Rate, Encoder, Resolution and so on.
If you want to save and play your video on iPhone, iPod, iPad and other devices, just switch to the Device tab and choose from the device list. What’s more, you can upload the newly made video file to all popular video sites such as YouTube and Vimeo directly from the interface of Filmora. Or turn to DVD tab to burn your video to DVD for playing on TV.
Method 2: Speed Up to Make a Time lapse Video
In case that you want to make a time lapse video with video footage, below are the step-by-step tutorial:
1 Import Video Footage
Just like importing photos to Filmora, follow the steps to import the video clips to media library.
2 Cut out part of the video for time lapse editing (optional)
Next, drag your video onto the video column in the timeline. Select the loaded video and click the “Play” button. While playing the video, drag the slider bar at the start time and hit the “Split” icon to cut out the part you want to do time lapse editing.
3 Speed up to create time lapse video
Right click on the video clip in the timeline to select Speed and Duration. Then a window will pop up for you to adjust the settings of video. Find the Speed option and drag the slider bar to the right to increase the speed. If you set the playback speed to play at 200% the original speed, then the 30-second clip be only 15 seconds (twice the speed). After that click OK. Click the Play button to preview the result. Filmora now support up to 100x fast mo and 0.01x slow mo.
4 Export your new time lapse video
If you are satisfied with the newly made time lapse video, just click Export to output the video footage.
Conclusion
That’s how to make a cool time lapse video with the time lapse video software Filmora, no matter whether you want to make a time lapse video from photos, or speed up the video to make a time lapse video, you can achieve that with a few clicks.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
You may have seen some time lapse videos already. A sunset motion, flower blooming, traffic and city lights and more time lapse videos. Time lapse is an amazing technique often used to make everything in the video seems moving much faster than in real life, like speed up a video clip and give the illusion of compressed time.
If you have a GoPro Hero 5 Black action camera, check our article abouthow to shoot a time-lapse video with GoPro.
Some phones also allow you to shoot time-lapse video , but we recommend you to use a good camera and video editing software to make better time lapse videos. If you are looking for a time lapse software to make a time lapse video, we recommend Filmora video editor , which is easy to use on both Windows PC and Mac. How to create a time-lapse video with Filmora? Download the software and follow the step-by-step tutorial below.
In this article, we will introduce two methods of creating time lapse video in Filmora:
With built-in slow/fast motion effects, you can use Filmora to make time lapse effects in drag-and-drop. If you want to add filters to your video, Filmora offers more than 150 free filters to use. Check the new features of Filmora to empower your imagination. Download it to have a try!
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Before we get started, we have summarized some tips for shooting time-lapse videos, hope that will help to shoot a good video footage. If you have some other tips and tricks about shooting time lapse videos, please share it on the comment below.
Tip 1: Keep the Camera/phone stable with camera stabilizer or tripod.
Tip 2: Make sure there is enough space for shooting time-lapse video. Large capacity memory cards are always welcomed.
Tip 3: Charge the battery fully before shooting and prepare a standby battery if you have.
If you wanna make a time lapse video with photos, you need set up your camera to take photos at a proper interval, such as take photo at every five second or use the built-in time lapse shooting settings in your camera. It is recommended to record or take photos for at least 20 minutes because the time lapse video will speed up. OK, now let’s start making the time lapse video:
Tips for Recording Time Lapse Video on iPhone
Method 1: Creating time lapse video from photos
1 Import the original photos to Filmora
After installing and launch Filmora video editor, import the shot time lapse photos to it. Click New Project and then click the Import button to add your photos to the media library. You can also directly drag and drop your video to the program. Then all the imported files will appear as thumbnails in the left of the window.
You can also import the photos from the video shooting device. Just plug in the video camera, click Import from Phone or Camera option in Import menu, and then transfer the target media files to Filmora.
After that, you need to select and drag and drop all the photos to the first video track.
2 Preview the photos
After all your photos are placed in timeline, you can zoom in the timeline or preview it in the Preview window to check if it needs any order adjustment or deletion.
3 Adjust Photo Duration to Create Time lapse Video
Select one of the photos in the timeline and right click on it to select Speed and Duration to open the Custom Speed panel. Go to Duration section, and change the duration of the photo to 00:00:00:01 or other duration based on your needs, and then click OK.
You can also add a background music to make time lapse more professional. You can choose a music sound from the built-in music library or import your own audio file.
4 Export your new video
Place the timeline playhead at the beginner, and play it in Preview window to check the time lapse effects. If everything works fine, click the Export tab and choose the target format and click SETTINGS to output the time lapse video. Here you can change the video format and video and audio parameters such as Bit Rate, Encoder, Resolution and so on.
If you want to save and play your video on iPhone, iPod, iPad and other devices, just switch to the Device tab and choose from the device list. What’s more, you can upload the newly made video file to all popular video sites such as YouTube and Vimeo directly from the interface of Filmora. Or turn to DVD tab to burn your video to DVD for playing on TV.
Method 2: Speed Up to Make a Time lapse Video
In case that you want to make a time lapse video with video footage, below are the step-by-step tutorial:
1 Import Video Footage
Just like importing photos to Filmora, follow the steps to import the video clips to media library.
2 Cut out part of the video for time lapse editing (optional)
Next, drag your video onto the video column in the timeline. Select the loaded video and click the “Play” button. While playing the video, drag the slider bar at the start time and hit the “Split” icon to cut out the part you want to do time lapse editing.
3 Speed up to create time lapse video
Right click on the video clip in the timeline to select Speed and Duration. Then a window will pop up for you to adjust the settings of video. Find the Speed option and drag the slider bar to the right to increase the speed. If you set the playback speed to play at 200% the original speed, then the 30-second clip be only 15 seconds (twice the speed). After that click OK. Click the Play button to preview the result. Filmora now support up to 100x fast mo and 0.01x slow mo.
4 Export your new time lapse video
If you are satisfied with the newly made time lapse video, just click Export to output the video footage.
Conclusion
That’s how to make a cool time lapse video with the time lapse video software Filmora, no matter whether you want to make a time lapse video from photos, or speed up the video to make a time lapse video, you can achieve that with a few clicks.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Premiere Pro Computer Setup: Meet the Minimum System Requirements
System Requirements for Running Premiere Pro: How to Set Up Computer
Benjamin Arango
Mar 27, 2024• Proven solutions
We all know that Adobe Premiere Pro is one of the best professional video editing software, while to run such a powerful video editing software, you may need a powerful windows PC or Mac as well. Though most modern computer systems can run Adobe Premiere out of the box, there are some steps to take, and potential decisions to make, before installing the software, or if you are building or buying a new computer to make sure you get the best experience possible with the software.
You may also like:Best Adobe Premiere Alternatives >>
Minimum system requirement to run Premiere Pro on Windows and Mac in 2019
Your computer should at least to meet the minimum specification below to run Premiere Pro, and if you need to edit some VR videos, your computer configuration should be higher according to the minimum specifications list on their website .
- Intel 6th or newer CPU
- Windows 10 (64-bit) 1703 or later/ MacOS V10.12 later
- 16GB RAM; 4GB GPU VRAM
- Fast internal SSD
- 1920*1080 Display resolution
- 32-bit video card
- Internet connection
However, it is important to remember this is the minimum specification, and will not necessarily give a satisfactory user experience. The recommended specifications are far more likely to provide the kind of performance expected of the software and those would be the ones to use as a guide for the minimum spec for a new computer or any upgrades being planned prior to installation.
How to check Computer Specifications
Since Premiere Pro CC only works on Windows 10 system after 2018 13.0 release, we will show you how to check if your PC meets the requirements to run Premiere Pro on Windows 10
- Press Windows Key+ E on the keyboard to bring up Windows Explorer.
- Right click the This PC option in the sidebar and then select Properties from the context menu.
- The system specification window will show up which you see the Processor, RAM, system type and other system information.
Checking the specification on your Mac is easy, just click the Apple icon in the top-left corner of your Mac, and then select About This Mac option. In the pop-up window you will see the information including Processor speed, memory and graphic card etc.
How to Set Up Computer for Premiere
1. Processor
Whilst the software will run on a Core2Duo intel or Phenom II AMD processor, it is worth noting that rendering can be highly intensive work for the processor and the fastest possible processor within your budget will pay dividends in speed of editing. In general, even a Core I3, the cheapest of the current Intel range, will be significantly faster than older processors, but because Premiere happily uses multi cored processors to their full, if the budget can reach to a quad core or more processor then do so, Premiere is a piece of software that benefits from the computational power increase more than most.
2. Memory
The next consideration is memory. The minimum specification suggests 4GB of RAM with 8GB recommended, for reliable and smooth running consider 8GB minimum, and go for as much as you can. For a computer that is used for other activities as well, multitasking can see even 24GB of Ram being fully utilized, especially if you are working on HD content. Speaking of content, this is the other aspect of memory to look at. Whilst you can use a storage drive that contains everything else on your computer to keep the media you are working on, for HD content especially, and for trouble free and the fastest possible operation it is advisable to reserve a single drive, preferably a 7200 RPM or faster one, exclusively for your media. Bandwidth and access times means Premiere will be significantly faster in operation with its media on a dedicated drive.
3. Graphic
The final aspect of specification to consider is graphics. Adobe Premiere uses a feature called the Mercury Playback Engine that allows much faster and smoother playback of video without rendering, it has two modes, software only and GPU acceleration mode (Using either CUDA or OpenCL). The GPU acceleration mode offers significant performance increases and is therefore highly desirable. However, not all GPU’s are compatible with the Mercury Playback Engine, the list of those that are is found on the previously linked specification page, so if a new computer is being built or purchased, or upgrades are being considered prior to install, it is highly desirable to utilize a compatible GPU where possible.
5. Settings
Having covered the basic specifications of a computer that will enhance the operation of Premiere, it is now time to look at the computer settings and how this can affect Premiere’s performance and usability.
The first thing to understand is that video editing, especially HD video, is bandwidth intensive, in effect, it fills up the lanes between the CPU, RAM, GPU and Hard Drive during operation. Spreading the use of that bandwidth over several devices can see huge performance gains, so one of the best ways to optimize the computer for Premier is to adjust how the hard drives are used. How effective this can be depends on the computer you are using, so we will try to cover a few different possibilities here.
6. Drive
If your computer contains a single drive, simply install Premiere and start using it, there are no options available here. If there are two drives, keep one for the operating system, programs and cache files. Use the second drive exclusively for video project files, exported projects and previews.
If the computer has three drives then keep one for the operating system and programs, the second one for the video project files, and use the third for previews, cache files and exported projects.
If you have access to even more drives, then split the cache from the previews, and ultimately have one drive each for previews, exports and cache. Spreading the files across as many drives as possible enhances performance by enabling the different read/write operations to occur without interference from each other.
That is the theory, but how do you achieve this? This is done within Premiere itself, there are two parts, accessing where the media cache files are placed is done though the edit menu, following the path edit > preferences > media.
Changing where the project files, previews and exports are stored is just as easy, and is accessed via the project menu by taking the path project > project settings > scratchdisks.
7. Sequence Setting
When working with Premiere it is important to have the correct settings for the type of media you are using and the nature of the final output. This is done within Premiere by a function known as a Sequence.
After creating a new project you are presented with the sequence dialogue box. You can have as many sequences in a single project as you like, but Premiere always assumes you require at least one and so needs the first one to be created to allow work on a project. Any media, both audio and video, placed into a sequence is automatically adapted to the settings of that sequence, so you will want to choose settings that match the original media as closely as possible. Each sequence in a project can have different settings if required, as this lessens the workload on the CPU and makes the process faster and smoother.
The sequence dialogue has three tabs, Sequence Presets, Settings and Tracks
The Preset Tab makes setting up a new sequence much simpler. Choosing a preset enables Premiere to choose the settings that best match the chosen video and audio format. There are a wide range of presets available to suit the most commonly used media types, they are organized based on camera formats. Within each group there are numerous settings and configurations to choose from based around frame sizes and interlacing. Whilst choosing the correct preset can be a little daunting to the uninitiated, ensuring the number of frames per second, the frame size and codec are correct is all that is required.
Once the preset is chosen you can move to the settings tab to adjust the preset manually. Some settings will not be adjustable in this tab due to the specific optimization required for the input media.
Because the presets do such a good job it is not really necessary to adjust anything in the settings tab, and unless you are trying to do something very specific.
While the standard presets are usually suitable, on occasion you may desire a custom setting. To do this, choose a sequence preset that is close to your media, and then make custom selections in the Settings tab. By selecting the Save Preset option on the Settings tab you can then create a custom setting with those parameters. Give the preset a suitable name in the Save Settings dialog and add any notes that are needed. The preset can be found in the Custom folder under Available Presets.
Those with the Apple Prores Codec on their computers can use this as the preview codec if required. By choosing Quicktime as the preview format in a custom editing mode, and lastly Apple Prores as the required codec.
Conclusion
If your computer failed to meet the requirement to run Premiere Pro, you may need to spend some money to buy a powerful computer or choose another professional video editing software similar to Premiere Pro, or choose a video editing software. If your computer isn’t powerful enough to run Premiere Pro, you will get awful experience at editing footage because of the long loading time and stuck playback.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
We all know that Adobe Premiere Pro is one of the best professional video editing software, while to run such a powerful video editing software, you may need a powerful windows PC or Mac as well. Though most modern computer systems can run Adobe Premiere out of the box, there are some steps to take, and potential decisions to make, before installing the software, or if you are building or buying a new computer to make sure you get the best experience possible with the software.
You may also like:Best Adobe Premiere Alternatives >>
Minimum system requirement to run Premiere Pro on Windows and Mac in 2019
Your computer should at least to meet the minimum specification below to run Premiere Pro, and if you need to edit some VR videos, your computer configuration should be higher according to the minimum specifications list on their website .
- Intel 6th or newer CPU
- Windows 10 (64-bit) 1703 or later/ MacOS V10.12 later
- 16GB RAM; 4GB GPU VRAM
- Fast internal SSD
- 1920*1080 Display resolution
- 32-bit video card
- Internet connection
However, it is important to remember this is the minimum specification, and will not necessarily give a satisfactory user experience. The recommended specifications are far more likely to provide the kind of performance expected of the software and those would be the ones to use as a guide for the minimum spec for a new computer or any upgrades being planned prior to installation.
How to check Computer Specifications
Since Premiere Pro CC only works on Windows 10 system after 2018 13.0 release, we will show you how to check if your PC meets the requirements to run Premiere Pro on Windows 10
- Press Windows Key+ E on the keyboard to bring up Windows Explorer.
- Right click the This PC option in the sidebar and then select Properties from the context menu.
- The system specification window will show up which you see the Processor, RAM, system type and other system information.
Checking the specification on your Mac is easy, just click the Apple icon in the top-left corner of your Mac, and then select About This Mac option. In the pop-up window you will see the information including Processor speed, memory and graphic card etc.
How to Set Up Computer for Premiere
1. Processor
Whilst the software will run on a Core2Duo intel or Phenom II AMD processor, it is worth noting that rendering can be highly intensive work for the processor and the fastest possible processor within your budget will pay dividends in speed of editing. In general, even a Core I3, the cheapest of the current Intel range, will be significantly faster than older processors, but because Premiere happily uses multi cored processors to their full, if the budget can reach to a quad core or more processor then do so, Premiere is a piece of software that benefits from the computational power increase more than most.
2. Memory
The next consideration is memory. The minimum specification suggests 4GB of RAM with 8GB recommended, for reliable and smooth running consider 8GB minimum, and go for as much as you can. For a computer that is used for other activities as well, multitasking can see even 24GB of Ram being fully utilized, especially if you are working on HD content. Speaking of content, this is the other aspect of memory to look at. Whilst you can use a storage drive that contains everything else on your computer to keep the media you are working on, for HD content especially, and for trouble free and the fastest possible operation it is advisable to reserve a single drive, preferably a 7200 RPM or faster one, exclusively for your media. Bandwidth and access times means Premiere will be significantly faster in operation with its media on a dedicated drive.
3. Graphic
The final aspect of specification to consider is graphics. Adobe Premiere uses a feature called the Mercury Playback Engine that allows much faster and smoother playback of video without rendering, it has two modes, software only and GPU acceleration mode (Using either CUDA or OpenCL). The GPU acceleration mode offers significant performance increases and is therefore highly desirable. However, not all GPU’s are compatible with the Mercury Playback Engine, the list of those that are is found on the previously linked specification page, so if a new computer is being built or purchased, or upgrades are being considered prior to install, it is highly desirable to utilize a compatible GPU where possible.
5. Settings
Having covered the basic specifications of a computer that will enhance the operation of Premiere, it is now time to look at the computer settings and how this can affect Premiere’s performance and usability.
The first thing to understand is that video editing, especially HD video, is bandwidth intensive, in effect, it fills up the lanes between the CPU, RAM, GPU and Hard Drive during operation. Spreading the use of that bandwidth over several devices can see huge performance gains, so one of the best ways to optimize the computer for Premier is to adjust how the hard drives are used. How effective this can be depends on the computer you are using, so we will try to cover a few different possibilities here.
6. Drive
If your computer contains a single drive, simply install Premiere and start using it, there are no options available here. If there are two drives, keep one for the operating system, programs and cache files. Use the second drive exclusively for video project files, exported projects and previews.
If the computer has three drives then keep one for the operating system and programs, the second one for the video project files, and use the third for previews, cache files and exported projects.
If you have access to even more drives, then split the cache from the previews, and ultimately have one drive each for previews, exports and cache. Spreading the files across as many drives as possible enhances performance by enabling the different read/write operations to occur without interference from each other.
That is the theory, but how do you achieve this? This is done within Premiere itself, there are two parts, accessing where the media cache files are placed is done though the edit menu, following the path edit > preferences > media.
Changing where the project files, previews and exports are stored is just as easy, and is accessed via the project menu by taking the path project > project settings > scratchdisks.
7. Sequence Setting
When working with Premiere it is important to have the correct settings for the type of media you are using and the nature of the final output. This is done within Premiere by a function known as a Sequence.
After creating a new project you are presented with the sequence dialogue box. You can have as many sequences in a single project as you like, but Premiere always assumes you require at least one and so needs the first one to be created to allow work on a project. Any media, both audio and video, placed into a sequence is automatically adapted to the settings of that sequence, so you will want to choose settings that match the original media as closely as possible. Each sequence in a project can have different settings if required, as this lessens the workload on the CPU and makes the process faster and smoother.
The sequence dialogue has three tabs, Sequence Presets, Settings and Tracks
The Preset Tab makes setting up a new sequence much simpler. Choosing a preset enables Premiere to choose the settings that best match the chosen video and audio format. There are a wide range of presets available to suit the most commonly used media types, they are organized based on camera formats. Within each group there are numerous settings and configurations to choose from based around frame sizes and interlacing. Whilst choosing the correct preset can be a little daunting to the uninitiated, ensuring the number of frames per second, the frame size and codec are correct is all that is required.
Once the preset is chosen you can move to the settings tab to adjust the preset manually. Some settings will not be adjustable in this tab due to the specific optimization required for the input media.
Because the presets do such a good job it is not really necessary to adjust anything in the settings tab, and unless you are trying to do something very specific.
While the standard presets are usually suitable, on occasion you may desire a custom setting. To do this, choose a sequence preset that is close to your media, and then make custom selections in the Settings tab. By selecting the Save Preset option on the Settings tab you can then create a custom setting with those parameters. Give the preset a suitable name in the Save Settings dialog and add any notes that are needed. The preset can be found in the Custom folder under Available Presets.
Those with the Apple Prores Codec on their computers can use this as the preview codec if required. By choosing Quicktime as the preview format in a custom editing mode, and lastly Apple Prores as the required codec.
Conclusion
If your computer failed to meet the requirement to run Premiere Pro, you may need to spend some money to buy a powerful computer or choose another professional video editing software similar to Premiere Pro, or choose a video editing software. If your computer isn’t powerful enough to run Premiere Pro, you will get awful experience at editing footage because of the long loading time and stuck playback.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
We all know that Adobe Premiere Pro is one of the best professional video editing software, while to run such a powerful video editing software, you may need a powerful windows PC or Mac as well. Though most modern computer systems can run Adobe Premiere out of the box, there are some steps to take, and potential decisions to make, before installing the software, or if you are building or buying a new computer to make sure you get the best experience possible with the software.
You may also like:Best Adobe Premiere Alternatives >>
Minimum system requirement to run Premiere Pro on Windows and Mac in 2019
Your computer should at least to meet the minimum specification below to run Premiere Pro, and if you need to edit some VR videos, your computer configuration should be higher according to the minimum specifications list on their website .
- Intel 6th or newer CPU
- Windows 10 (64-bit) 1703 or later/ MacOS V10.12 later
- 16GB RAM; 4GB GPU VRAM
- Fast internal SSD
- 1920*1080 Display resolution
- 32-bit video card
- Internet connection
However, it is important to remember this is the minimum specification, and will not necessarily give a satisfactory user experience. The recommended specifications are far more likely to provide the kind of performance expected of the software and those would be the ones to use as a guide for the minimum spec for a new computer or any upgrades being planned prior to installation.
How to check Computer Specifications
Since Premiere Pro CC only works on Windows 10 system after 2018 13.0 release, we will show you how to check if your PC meets the requirements to run Premiere Pro on Windows 10
- Press Windows Key+ E on the keyboard to bring up Windows Explorer.
- Right click the This PC option in the sidebar and then select Properties from the context menu.
- The system specification window will show up which you see the Processor, RAM, system type and other system information.
Checking the specification on your Mac is easy, just click the Apple icon in the top-left corner of your Mac, and then select About This Mac option. In the pop-up window you will see the information including Processor speed, memory and graphic card etc.
How to Set Up Computer for Premiere
1. Processor
Whilst the software will run on a Core2Duo intel or Phenom II AMD processor, it is worth noting that rendering can be highly intensive work for the processor and the fastest possible processor within your budget will pay dividends in speed of editing. In general, even a Core I3, the cheapest of the current Intel range, will be significantly faster than older processors, but because Premiere happily uses multi cored processors to their full, if the budget can reach to a quad core or more processor then do so, Premiere is a piece of software that benefits from the computational power increase more than most.
2. Memory
The next consideration is memory. The minimum specification suggests 4GB of RAM with 8GB recommended, for reliable and smooth running consider 8GB minimum, and go for as much as you can. For a computer that is used for other activities as well, multitasking can see even 24GB of Ram being fully utilized, especially if you are working on HD content. Speaking of content, this is the other aspect of memory to look at. Whilst you can use a storage drive that contains everything else on your computer to keep the media you are working on, for HD content especially, and for trouble free and the fastest possible operation it is advisable to reserve a single drive, preferably a 7200 RPM or faster one, exclusively for your media. Bandwidth and access times means Premiere will be significantly faster in operation with its media on a dedicated drive.
3. Graphic
The final aspect of specification to consider is graphics. Adobe Premiere uses a feature called the Mercury Playback Engine that allows much faster and smoother playback of video without rendering, it has two modes, software only and GPU acceleration mode (Using either CUDA or OpenCL). The GPU acceleration mode offers significant performance increases and is therefore highly desirable. However, not all GPU’s are compatible with the Mercury Playback Engine, the list of those that are is found on the previously linked specification page, so if a new computer is being built or purchased, or upgrades are being considered prior to install, it is highly desirable to utilize a compatible GPU where possible.
5. Settings
Having covered the basic specifications of a computer that will enhance the operation of Premiere, it is now time to look at the computer settings and how this can affect Premiere’s performance and usability.
The first thing to understand is that video editing, especially HD video, is bandwidth intensive, in effect, it fills up the lanes between the CPU, RAM, GPU and Hard Drive during operation. Spreading the use of that bandwidth over several devices can see huge performance gains, so one of the best ways to optimize the computer for Premier is to adjust how the hard drives are used. How effective this can be depends on the computer you are using, so we will try to cover a few different possibilities here.
6. Drive
If your computer contains a single drive, simply install Premiere and start using it, there are no options available here. If there are two drives, keep one for the operating system, programs and cache files. Use the second drive exclusively for video project files, exported projects and previews.
If the computer has three drives then keep one for the operating system and programs, the second one for the video project files, and use the third for previews, cache files and exported projects.
If you have access to even more drives, then split the cache from the previews, and ultimately have one drive each for previews, exports and cache. Spreading the files across as many drives as possible enhances performance by enabling the different read/write operations to occur without interference from each other.
That is the theory, but how do you achieve this? This is done within Premiere itself, there are two parts, accessing where the media cache files are placed is done though the edit menu, following the path edit > preferences > media.
Changing where the project files, previews and exports are stored is just as easy, and is accessed via the project menu by taking the path project > project settings > scratchdisks.
7. Sequence Setting
When working with Premiere it is important to have the correct settings for the type of media you are using and the nature of the final output. This is done within Premiere by a function known as a Sequence.
After creating a new project you are presented with the sequence dialogue box. You can have as many sequences in a single project as you like, but Premiere always assumes you require at least one and so needs the first one to be created to allow work on a project. Any media, both audio and video, placed into a sequence is automatically adapted to the settings of that sequence, so you will want to choose settings that match the original media as closely as possible. Each sequence in a project can have different settings if required, as this lessens the workload on the CPU and makes the process faster and smoother.
The sequence dialogue has three tabs, Sequence Presets, Settings and Tracks
The Preset Tab makes setting up a new sequence much simpler. Choosing a preset enables Premiere to choose the settings that best match the chosen video and audio format. There are a wide range of presets available to suit the most commonly used media types, they are organized based on camera formats. Within each group there are numerous settings and configurations to choose from based around frame sizes and interlacing. Whilst choosing the correct preset can be a little daunting to the uninitiated, ensuring the number of frames per second, the frame size and codec are correct is all that is required.
Once the preset is chosen you can move to the settings tab to adjust the preset manually. Some settings will not be adjustable in this tab due to the specific optimization required for the input media.
Because the presets do such a good job it is not really necessary to adjust anything in the settings tab, and unless you are trying to do something very specific.
While the standard presets are usually suitable, on occasion you may desire a custom setting. To do this, choose a sequence preset that is close to your media, and then make custom selections in the Settings tab. By selecting the Save Preset option on the Settings tab you can then create a custom setting with those parameters. Give the preset a suitable name in the Save Settings dialog and add any notes that are needed. The preset can be found in the Custom folder under Available Presets.
Those with the Apple Prores Codec on their computers can use this as the preview codec if required. By choosing Quicktime as the preview format in a custom editing mode, and lastly Apple Prores as the required codec.
Conclusion
If your computer failed to meet the requirement to run Premiere Pro, you may need to spend some money to buy a powerful computer or choose another professional video editing software similar to Premiere Pro, or choose a video editing software. If your computer isn’t powerful enough to run Premiere Pro, you will get awful experience at editing footage because of the long loading time and stuck playback.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
We all know that Adobe Premiere Pro is one of the best professional video editing software, while to run such a powerful video editing software, you may need a powerful windows PC or Mac as well. Though most modern computer systems can run Adobe Premiere out of the box, there are some steps to take, and potential decisions to make, before installing the software, or if you are building or buying a new computer to make sure you get the best experience possible with the software.
You may also like:Best Adobe Premiere Alternatives >>
Minimum system requirement to run Premiere Pro on Windows and Mac in 2019
Your computer should at least to meet the minimum specification below to run Premiere Pro, and if you need to edit some VR videos, your computer configuration should be higher according to the minimum specifications list on their website .
- Intel 6th or newer CPU
- Windows 10 (64-bit) 1703 or later/ MacOS V10.12 later
- 16GB RAM; 4GB GPU VRAM
- Fast internal SSD
- 1920*1080 Display resolution
- 32-bit video card
- Internet connection
However, it is important to remember this is the minimum specification, and will not necessarily give a satisfactory user experience. The recommended specifications are far more likely to provide the kind of performance expected of the software and those would be the ones to use as a guide for the minimum spec for a new computer or any upgrades being planned prior to installation.
How to check Computer Specifications
Since Premiere Pro CC only works on Windows 10 system after 2018 13.0 release, we will show you how to check if your PC meets the requirements to run Premiere Pro on Windows 10
- Press Windows Key+ E on the keyboard to bring up Windows Explorer.
- Right click the This PC option in the sidebar and then select Properties from the context menu.
- The system specification window will show up which you see the Processor, RAM, system type and other system information.
Checking the specification on your Mac is easy, just click the Apple icon in the top-left corner of your Mac, and then select About This Mac option. In the pop-up window you will see the information including Processor speed, memory and graphic card etc.
How to Set Up Computer for Premiere
1. Processor
Whilst the software will run on a Core2Duo intel or Phenom II AMD processor, it is worth noting that rendering can be highly intensive work for the processor and the fastest possible processor within your budget will pay dividends in speed of editing. In general, even a Core I3, the cheapest of the current Intel range, will be significantly faster than older processors, but because Premiere happily uses multi cored processors to their full, if the budget can reach to a quad core or more processor then do so, Premiere is a piece of software that benefits from the computational power increase more than most.
2. Memory
The next consideration is memory. The minimum specification suggests 4GB of RAM with 8GB recommended, for reliable and smooth running consider 8GB minimum, and go for as much as you can. For a computer that is used for other activities as well, multitasking can see even 24GB of Ram being fully utilized, especially if you are working on HD content. Speaking of content, this is the other aspect of memory to look at. Whilst you can use a storage drive that contains everything else on your computer to keep the media you are working on, for HD content especially, and for trouble free and the fastest possible operation it is advisable to reserve a single drive, preferably a 7200 RPM or faster one, exclusively for your media. Bandwidth and access times means Premiere will be significantly faster in operation with its media on a dedicated drive.
3. Graphic
The final aspect of specification to consider is graphics. Adobe Premiere uses a feature called the Mercury Playback Engine that allows much faster and smoother playback of video without rendering, it has two modes, software only and GPU acceleration mode (Using either CUDA or OpenCL). The GPU acceleration mode offers significant performance increases and is therefore highly desirable. However, not all GPU’s are compatible with the Mercury Playback Engine, the list of those that are is found on the previously linked specification page, so if a new computer is being built or purchased, or upgrades are being considered prior to install, it is highly desirable to utilize a compatible GPU where possible.
5. Settings
Having covered the basic specifications of a computer that will enhance the operation of Premiere, it is now time to look at the computer settings and how this can affect Premiere’s performance and usability.
The first thing to understand is that video editing, especially HD video, is bandwidth intensive, in effect, it fills up the lanes between the CPU, RAM, GPU and Hard Drive during operation. Spreading the use of that bandwidth over several devices can see huge performance gains, so one of the best ways to optimize the computer for Premier is to adjust how the hard drives are used. How effective this can be depends on the computer you are using, so we will try to cover a few different possibilities here.
6. Drive
If your computer contains a single drive, simply install Premiere and start using it, there are no options available here. If there are two drives, keep one for the operating system, programs and cache files. Use the second drive exclusively for video project files, exported projects and previews.
If the computer has three drives then keep one for the operating system and programs, the second one for the video project files, and use the third for previews, cache files and exported projects.
If you have access to even more drives, then split the cache from the previews, and ultimately have one drive each for previews, exports and cache. Spreading the files across as many drives as possible enhances performance by enabling the different read/write operations to occur without interference from each other.
That is the theory, but how do you achieve this? This is done within Premiere itself, there are two parts, accessing where the media cache files are placed is done though the edit menu, following the path edit > preferences > media.
Changing where the project files, previews and exports are stored is just as easy, and is accessed via the project menu by taking the path project > project settings > scratchdisks.
7. Sequence Setting
When working with Premiere it is important to have the correct settings for the type of media you are using and the nature of the final output. This is done within Premiere by a function known as a Sequence.
After creating a new project you are presented with the sequence dialogue box. You can have as many sequences in a single project as you like, but Premiere always assumes you require at least one and so needs the first one to be created to allow work on a project. Any media, both audio and video, placed into a sequence is automatically adapted to the settings of that sequence, so you will want to choose settings that match the original media as closely as possible. Each sequence in a project can have different settings if required, as this lessens the workload on the CPU and makes the process faster and smoother.
The sequence dialogue has three tabs, Sequence Presets, Settings and Tracks
The Preset Tab makes setting up a new sequence much simpler. Choosing a preset enables Premiere to choose the settings that best match the chosen video and audio format. There are a wide range of presets available to suit the most commonly used media types, they are organized based on camera formats. Within each group there are numerous settings and configurations to choose from based around frame sizes and interlacing. Whilst choosing the correct preset can be a little daunting to the uninitiated, ensuring the number of frames per second, the frame size and codec are correct is all that is required.
Once the preset is chosen you can move to the settings tab to adjust the preset manually. Some settings will not be adjustable in this tab due to the specific optimization required for the input media.
Because the presets do such a good job it is not really necessary to adjust anything in the settings tab, and unless you are trying to do something very specific.
While the standard presets are usually suitable, on occasion you may desire a custom setting. To do this, choose a sequence preset that is close to your media, and then make custom selections in the Settings tab. By selecting the Save Preset option on the Settings tab you can then create a custom setting with those parameters. Give the preset a suitable name in the Save Settings dialog and add any notes that are needed. The preset can be found in the Custom folder under Available Presets.
Those with the Apple Prores Codec on their computers can use this as the preview codec if required. By choosing Quicktime as the preview format in a custom editing mode, and lastly Apple Prores as the required codec.
Conclusion
If your computer failed to meet the requirement to run Premiere Pro, you may need to spend some money to buy a powerful computer or choose another professional video editing software similar to Premiere Pro, or choose a video editing software. If your computer isn’t powerful enough to run Premiere Pro, you will get awful experience at editing footage because of the long loading time and stuck playback.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Flip Videos with Ease: Best Online Editors
Wondering how you can flip videos online? There are numerous reasons why an individual may need to flip a video. It could be because the medium they are using to post a video requires a flipped version. There are times when we think we have recorded a video horizontally, but turns out it was recorded vertically - this is where video flipping software comes in handy and helps you out!
With this online video-editing tool, you can mirror a video from left to right or turn it upside down.
In this article, you can learn the key differences between flipping and mirroring a video, what are the best flip video online free tools, and how to flip a video using Filmora!
In this article
01 Differences Between Flip and Mirror
03 How to Flip Video with Filmora
Part 1: What’s the Difference Between Flip and Mirror?
Many people believe the flip feature and mirror function in a video editing tool is the same thing. However, that is not the case - there are numerous differences. The flip function allows individuals to vertically and horizontally change the outlook of a video. On the other hand, the mirror function allows one to make changes according to the mirror reflection.
Source Video
Video Flipped Horizontally
Mirrored Video
For instance, if a person is working from left to right - once the video is mirrored, it will show the person walking from right to left. So, the flip function changes the portrait and landscape layout of a video, while the mirror effect changes the axis.
Part 2: 5 Free Best Video Flipper Online
If you have the right tools, you can do just about anything with your videos! Below are some of the best flip videos online with free no watermark tools.
1. Kapwing.com
This online tool is a user-friendly video editor which enables individuals to flip, rotate, convert, resize, and do so much more with videos. You can edit a video from scratch and it is very easy! This tool can be used on your desktop as well as a laptop, so you do not need to worry about which device you are using.
To flip an image on this tool, all you need to do is upload the video you would like to flip, and then on the right-hand side of the screen, adjust the rotation settings. Select the degree to which you would like to rotate your videos to, and the system will automatically process your command.
2. https://online-video-cutter.com
Tired of installing countless video editing tools on your laptop? Then just switch to this online video cutter that allows you to switch videos to any angle you want. You can rotate videos to 270, 180, and 90 degrees. This software can be used on iOS devices as well as Android.
The process of flipping a file on this online tool is extremely fast and efficient. All you need to do is import the file you want to process by adding it through Google Drive/Dropbox/URL or by uploading it from the computer. Once the file has been imported, just select the Flip option. This online tool allows you to flip vertically and horizontally, so you can choose the right settings based on your need. After the video is flipped, click the Save button and this website will save it to your default downloader folder with file size displayed. However, keep in mind that this tool cannot process files that are larger than 500MB.
3. Ezgif.com
While this top-of-the-line tool is used to make gifs, Ezgif.com can also be used to rotate or flip a video. Apart from flipping a video, you can also mirror, resize, and cut videos as well through this tool - how great is that?!
If you are looking at Ezgif.com for flipping a video, you will be done with the task in less than ten seconds because all you have to do is upload the file, select flipping horizontally or vertically that you would like, and just save the video. Please note you can’t upload videos larger than 100MB size.
4. Video2Edit
Just as the name suggests, in this tool you can edit, flip, or rotate any video that you like on Video2Edit website . On its home page click Rotate video menu and then upload a video. You can use Dropbox, Google Drive, the direct URL to upload. Or, you can upload the video from the desktop directly.
This online tool allows you to set up the final video formats, the rotation angles, and the mirror and flip directions. You can choose to flip the video horizontally and vertically. However, if you want to a large video size at uploading, and get rid of the ads on the website, you may need to pay.
5. Clideo.com
The Clideo website features a lot of online tool tools, such as an online merger, online compressor, online resizer, and online video maker. Click the All tools button and then you will see all available tools, including the online video flipping tool.
Click the Flip video menu, and then choose the video file from your computer. You can also use the Google Drive and Dropbox link to upload. After the video is loaded, you can see the flip video interface which allows you to flip video vertically and horizontally, choose one according to your needs. Besides flipping video, you can also set up the video format as MP4 or others. Click Export to save the flipped video on your computer.
Part 3: How to Flip Videos with Filmora with One-Click on Windows and Mac?
While using online tools is far more convenient, they do have their downsides too!
Did you know that an online tool has an 80% more probability of getting hacked? That means any videos you upload to the online tool are at risk of being exposed to dangerous hackers. Additionally, in online tools, you have numerous restrictions in terms of file sizes, formats, and the options available. If you do not subscribe to the tool, then chances are that you will not be able to use all the functions of that tool! However, there is one solution. Wondershare Filmora! This application can be downloaded into your Windows and Mac devices!
For Win 7 or later (64-bit)
For macOS 10.12 or later
To make use of Filmora on Windows and Mac devices to flip a video, all you have to do is follow the steps outlined below.
First, import your video file to Filmora and drop it to the video timeline.
Once you have done that, double-click on the video and select Transform from the dropdown menu. Filmora provides 2 ways to flip, you can flip the video horizontally, which will act as mirror effects, or flip the video vertically.
Are You Ready to Flip Videos?
Flipping a video is extremely easy if you have the right tools. There are numerous online tools available in the market, however, each has its limitations. Due to this, downloading a video editing application for flipping videos is a more reliable option - Filmora is the go-to option!
03 How to Flip Video with Filmora
Part 1: What’s the Difference Between Flip and Mirror?
Many people believe the flip feature and mirror function in a video editing tool is the same thing. However, that is not the case - there are numerous differences. The flip function allows individuals to vertically and horizontally change the outlook of a video. On the other hand, the mirror function allows one to make changes according to the mirror reflection.
Source Video
Video Flipped Horizontally
Mirrored Video
For instance, if a person is working from left to right - once the video is mirrored, it will show the person walking from right to left. So, the flip function changes the portrait and landscape layout of a video, while the mirror effect changes the axis.
Part 2: 5 Free Best Video Flipper Online
If you have the right tools, you can do just about anything with your videos! Below are some of the best flip videos online with free no watermark tools.
1. Kapwing.com
This online tool is a user-friendly video editor which enables individuals to flip, rotate, convert, resize, and do so much more with videos. You can edit a video from scratch and it is very easy! This tool can be used on your desktop as well as a laptop, so you do not need to worry about which device you are using.
To flip an image on this tool, all you need to do is upload the video you would like to flip, and then on the right-hand side of the screen, adjust the rotation settings. Select the degree to which you would like to rotate your videos to, and the system will automatically process your command.
2. https://online-video-cutter.com
Tired of installing countless video editing tools on your laptop? Then just switch to this online video cutter that allows you to switch videos to any angle you want. You can rotate videos to 270, 180, and 90 degrees. This software can be used on iOS devices as well as Android.
The process of flipping a file on this online tool is extremely fast and efficient. All you need to do is import the file you want to process by adding it through Google Drive/Dropbox/URL or by uploading it from the computer. Once the file has been imported, just select the Flip option. This online tool allows you to flip vertically and horizontally, so you can choose the right settings based on your need. After the video is flipped, click the Save button and this website will save it to your default downloader folder with file size displayed. However, keep in mind that this tool cannot process files that are larger than 500MB.
3. Ezgif.com
While this top-of-the-line tool is used to make gifs, Ezgif.com can also be used to rotate or flip a video. Apart from flipping a video, you can also mirror, resize, and cut videos as well through this tool - how great is that?!
If you are looking at Ezgif.com for flipping a video, you will be done with the task in less than ten seconds because all you have to do is upload the file, select flipping horizontally or vertically that you would like, and just save the video. Please note you can’t upload videos larger than 100MB size.
4. Video2Edit
Just as the name suggests, in this tool you can edit, flip, or rotate any video that you like on Video2Edit website . On its home page click Rotate video menu and then upload a video. You can use Dropbox, Google Drive, the direct URL to upload. Or, you can upload the video from the desktop directly.
This online tool allows you to set up the final video formats, the rotation angles, and the mirror and flip directions. You can choose to flip the video horizontally and vertically. However, if you want to a large video size at uploading, and get rid of the ads on the website, you may need to pay.
5. Clideo.com
The Clideo website features a lot of online tool tools, such as an online merger, online compressor, online resizer, and online video maker. Click the All tools button and then you will see all available tools, including the online video flipping tool.
Click the Flip video menu, and then choose the video file from your computer. You can also use the Google Drive and Dropbox link to upload. After the video is loaded, you can see the flip video interface which allows you to flip video vertically and horizontally, choose one according to your needs. Besides flipping video, you can also set up the video format as MP4 or others. Click Export to save the flipped video on your computer.
Part 3: How to Flip Videos with Filmora with One-Click on Windows and Mac?
While using online tools is far more convenient, they do have their downsides too!
Did you know that an online tool has an 80% more probability of getting hacked? That means any videos you upload to the online tool are at risk of being exposed to dangerous hackers. Additionally, in online tools, you have numerous restrictions in terms of file sizes, formats, and the options available. If you do not subscribe to the tool, then chances are that you will not be able to use all the functions of that tool! However, there is one solution. Wondershare Filmora! This application can be downloaded into your Windows and Mac devices!
For Win 7 or later (64-bit)
For macOS 10.12 or later
To make use of Filmora on Windows and Mac devices to flip a video, all you have to do is follow the steps outlined below.
First, import your video file to Filmora and drop it to the video timeline.
Once you have done that, double-click on the video and select Transform from the dropdown menu. Filmora provides 2 ways to flip, you can flip the video horizontally, which will act as mirror effects, or flip the video vertically.
Are You Ready to Flip Videos?
Flipping a video is extremely easy if you have the right tools. There are numerous online tools available in the market, however, each has its limitations. Due to this, downloading a video editing application for flipping videos is a more reliable option - Filmora is the go-to option!
03 How to Flip Video with Filmora
Part 1: What’s the Difference Between Flip and Mirror?
Many people believe the flip feature and mirror function in a video editing tool is the same thing. However, that is not the case - there are numerous differences. The flip function allows individuals to vertically and horizontally change the outlook of a video. On the other hand, the mirror function allows one to make changes according to the mirror reflection.
Source Video
Video Flipped Horizontally
Mirrored Video
For instance, if a person is working from left to right - once the video is mirrored, it will show the person walking from right to left. So, the flip function changes the portrait and landscape layout of a video, while the mirror effect changes the axis.
Part 2: 5 Free Best Video Flipper Online
If you have the right tools, you can do just about anything with your videos! Below are some of the best flip videos online with free no watermark tools.
1. Kapwing.com
This online tool is a user-friendly video editor which enables individuals to flip, rotate, convert, resize, and do so much more with videos. You can edit a video from scratch and it is very easy! This tool can be used on your desktop as well as a laptop, so you do not need to worry about which device you are using.
To flip an image on this tool, all you need to do is upload the video you would like to flip, and then on the right-hand side of the screen, adjust the rotation settings. Select the degree to which you would like to rotate your videos to, and the system will automatically process your command.
2. https://online-video-cutter.com
Tired of installing countless video editing tools on your laptop? Then just switch to this online video cutter that allows you to switch videos to any angle you want. You can rotate videos to 270, 180, and 90 degrees. This software can be used on iOS devices as well as Android.
The process of flipping a file on this online tool is extremely fast and efficient. All you need to do is import the file you want to process by adding it through Google Drive/Dropbox/URL or by uploading it from the computer. Once the file has been imported, just select the Flip option. This online tool allows you to flip vertically and horizontally, so you can choose the right settings based on your need. After the video is flipped, click the Save button and this website will save it to your default downloader folder with file size displayed. However, keep in mind that this tool cannot process files that are larger than 500MB.
3. Ezgif.com
While this top-of-the-line tool is used to make gifs, Ezgif.com can also be used to rotate or flip a video. Apart from flipping a video, you can also mirror, resize, and cut videos as well through this tool - how great is that?!
If you are looking at Ezgif.com for flipping a video, you will be done with the task in less than ten seconds because all you have to do is upload the file, select flipping horizontally or vertically that you would like, and just save the video. Please note you can’t upload videos larger than 100MB size.
4. Video2Edit
Just as the name suggests, in this tool you can edit, flip, or rotate any video that you like on Video2Edit website . On its home page click Rotate video menu and then upload a video. You can use Dropbox, Google Drive, the direct URL to upload. Or, you can upload the video from the desktop directly.
This online tool allows you to set up the final video formats, the rotation angles, and the mirror and flip directions. You can choose to flip the video horizontally and vertically. However, if you want to a large video size at uploading, and get rid of the ads on the website, you may need to pay.
5. Clideo.com
The Clideo website features a lot of online tool tools, such as an online merger, online compressor, online resizer, and online video maker. Click the All tools button and then you will see all available tools, including the online video flipping tool.
Click the Flip video menu, and then choose the video file from your computer. You can also use the Google Drive and Dropbox link to upload. After the video is loaded, you can see the flip video interface which allows you to flip video vertically and horizontally, choose one according to your needs. Besides flipping video, you can also set up the video format as MP4 or others. Click Export to save the flipped video on your computer.
Part 3: How to Flip Videos with Filmora with One-Click on Windows and Mac?
While using online tools is far more convenient, they do have their downsides too!
Did you know that an online tool has an 80% more probability of getting hacked? That means any videos you upload to the online tool are at risk of being exposed to dangerous hackers. Additionally, in online tools, you have numerous restrictions in terms of file sizes, formats, and the options available. If you do not subscribe to the tool, then chances are that you will not be able to use all the functions of that tool! However, there is one solution. Wondershare Filmora! This application can be downloaded into your Windows and Mac devices!
For Win 7 or later (64-bit)
For macOS 10.12 or later
To make use of Filmora on Windows and Mac devices to flip a video, all you have to do is follow the steps outlined below.
First, import your video file to Filmora and drop it to the video timeline.
Once you have done that, double-click on the video and select Transform from the dropdown menu. Filmora provides 2 ways to flip, you can flip the video horizontally, which will act as mirror effects, or flip the video vertically.
Are You Ready to Flip Videos?
Flipping a video is extremely easy if you have the right tools. There are numerous online tools available in the market, however, each has its limitations. Due to this, downloading a video editing application for flipping videos is a more reliable option - Filmora is the go-to option!
03 How to Flip Video with Filmora
Part 1: What’s the Difference Between Flip and Mirror?
Many people believe the flip feature and mirror function in a video editing tool is the same thing. However, that is not the case - there are numerous differences. The flip function allows individuals to vertically and horizontally change the outlook of a video. On the other hand, the mirror function allows one to make changes according to the mirror reflection.
Source Video
Video Flipped Horizontally
Mirrored Video
For instance, if a person is working from left to right - once the video is mirrored, it will show the person walking from right to left. So, the flip function changes the portrait and landscape layout of a video, while the mirror effect changes the axis.
Part 2: 5 Free Best Video Flipper Online
If you have the right tools, you can do just about anything with your videos! Below are some of the best flip videos online with free no watermark tools.
1. Kapwing.com
This online tool is a user-friendly video editor which enables individuals to flip, rotate, convert, resize, and do so much more with videos. You can edit a video from scratch and it is very easy! This tool can be used on your desktop as well as a laptop, so you do not need to worry about which device you are using.
To flip an image on this tool, all you need to do is upload the video you would like to flip, and then on the right-hand side of the screen, adjust the rotation settings. Select the degree to which you would like to rotate your videos to, and the system will automatically process your command.
2. https://online-video-cutter.com
Tired of installing countless video editing tools on your laptop? Then just switch to this online video cutter that allows you to switch videos to any angle you want. You can rotate videos to 270, 180, and 90 degrees. This software can be used on iOS devices as well as Android.
The process of flipping a file on this online tool is extremely fast and efficient. All you need to do is import the file you want to process by adding it through Google Drive/Dropbox/URL or by uploading it from the computer. Once the file has been imported, just select the Flip option. This online tool allows you to flip vertically and horizontally, so you can choose the right settings based on your need. After the video is flipped, click the Save button and this website will save it to your default downloader folder with file size displayed. However, keep in mind that this tool cannot process files that are larger than 500MB.
3. Ezgif.com
While this top-of-the-line tool is used to make gifs, Ezgif.com can also be used to rotate or flip a video. Apart from flipping a video, you can also mirror, resize, and cut videos as well through this tool - how great is that?!
If you are looking at Ezgif.com for flipping a video, you will be done with the task in less than ten seconds because all you have to do is upload the file, select flipping horizontally or vertically that you would like, and just save the video. Please note you can’t upload videos larger than 100MB size.
4. Video2Edit
Just as the name suggests, in this tool you can edit, flip, or rotate any video that you like on Video2Edit website . On its home page click Rotate video menu and then upload a video. You can use Dropbox, Google Drive, the direct URL to upload. Or, you can upload the video from the desktop directly.
This online tool allows you to set up the final video formats, the rotation angles, and the mirror and flip directions. You can choose to flip the video horizontally and vertically. However, if you want to a large video size at uploading, and get rid of the ads on the website, you may need to pay.
5. Clideo.com
The Clideo website features a lot of online tool tools, such as an online merger, online compressor, online resizer, and online video maker. Click the All tools button and then you will see all available tools, including the online video flipping tool.
Click the Flip video menu, and then choose the video file from your computer. You can also use the Google Drive and Dropbox link to upload. After the video is loaded, you can see the flip video interface which allows you to flip video vertically and horizontally, choose one according to your needs. Besides flipping video, you can also set up the video format as MP4 or others. Click Export to save the flipped video on your computer.
Part 3: How to Flip Videos with Filmora with One-Click on Windows and Mac?
While using online tools is far more convenient, they do have their downsides too!
Did you know that an online tool has an 80% more probability of getting hacked? That means any videos you upload to the online tool are at risk of being exposed to dangerous hackers. Additionally, in online tools, you have numerous restrictions in terms of file sizes, formats, and the options available. If you do not subscribe to the tool, then chances are that you will not be able to use all the functions of that tool! However, there is one solution. Wondershare Filmora! This application can be downloaded into your Windows and Mac devices!
For Win 7 or later (64-bit)
For macOS 10.12 or later
To make use of Filmora on Windows and Mac devices to flip a video, all you have to do is follow the steps outlined below.
First, import your video file to Filmora and drop it to the video timeline.
Once you have done that, double-click on the video and select Transform from the dropdown menu. Filmora provides 2 ways to flip, you can flip the video horizontally, which will act as mirror effects, or flip the video vertically.
Are You Ready to Flip Videos?
Flipping a video is extremely easy if you have the right tools. There are numerous online tools available in the market, however, each has its limitations. Due to this, downloading a video editing application for flipping videos is a more reliable option - Filmora is the go-to option!
Also read:
- New In 2024, Edit Videos Freely No Watermarks with These 10 Trimmers
- The Ultimate List of Free and Open-Source Video Editing Software for 2024
- In 2024, Best of the Best 5 Free AVI Video Rotation Tools
- Updated Cut Your Videos Without a Price 7 Free Trimmers
- In 2024, Chromecast Local Content How to Stream Videos From Your Computer or Mobile Device
- New 2024 Approved Ubuntu Video Editing Essentials Top 10 Free Options
- 2024 Approved Accurate Timing Made Simple 8 Best Timecode Conversion Apps and Websites
- New In 2024, Say Goodbye to Cropping The Definitive Facebook Video Aspect Ratio Guide
- New In 2024, Splice Video Editing App A Hands-On Examination
- Updated Edit Like a Pro A Comprehensive Tutorial on MP4 Video Editing for Mac and Windows Users
- Brighten Up Best Video Editing Apps for Mobile Devices for 2024
- New Elevate Your Storytelling How to Create Stunning, Hollywood-Style Videos for 2024
- Updated The Ultimate List of Video Maker Apps with Music for Mobile Devices for 2024
- New In 2024, Sony Vegas Alternatives for Windows Top Picks
- In 2024, Aspect Ratio Mastery 5 Surprising Facts About 16X9 Calculators
- 2024 Approved Free Video Editing Software 10 Alternatives to Windows Movie Maker
- In 2024, The Ultimate Guide to Free Video Looping Software for Windows and Mac
- Updated 2024 Approved From Zero to Hero Master Lip Syncing with These 5 Amazing Apps
- Updated In 2024, The Ultimate List 28 Video to GIF Converter Options
- New In 2024, Best 8 Light Video Editing Software
- In 2024, Get Noticed on LinkedIn Ideal Video Aspect Ratios for Standout Posts
- Updated From Novice to Pro The Best iPhone Video Editing Apps for 2024
- In 2024, Easy Video Joining Solutions Top Alternatives to Popular Software
- New 2024 Approved Transform Your MP4 Files A Step-by-Step Video Editing Tutorial for Mac and Windows
- 2024 Approved From Novice to Pro Top Animation Tools for Every Level of Expertise
- In 2024, Pro Editing Techniques L-Cuts and J-Cuts in FCPX Made Easy
- New In 2024, Uncovering the Secrets of Efficient OGG Conversion
- New The Smart Way to Choose a Video to Audio Converter Essential Features to Consider
- New Add Subtitles to Video for Free Top 10 Online Caption Makers for 2024
- Trim, Cut, and Edit AVI Videos Top Software for Windows, MAC, and Mobile for 2024
- New Unlock FCPX Expert-Approved Tutorials and Courses for 2024
- 2024 Approved Insights From the Best OGG Conversion Tools
- Updated 2024 Approved The Ultimate Guide to 4K/8K Video Editing Top Software
- New WhatsApp Video Status Production Studios for 2024
- New Debunking Myths 5 Little-Known Truths About the 16X9 Ratio Calculator
- Updated In 2024, Windows Movie Makers Top 6 Picks
- New Create Video With PPT for 2024
- How to recover old messages from your Samsung Galaxy S24 Ultra
- How To Unlock Any Xiaomi Redmi Note 12 Pro 4G Phone Password Using Emergency Call
- What Pokémon Evolve with A Dawn Stone For Xiaomi Civi 3 Disney 100th Anniversary Edition? | Dr.fone
- A Detailed VPNa Fake GPS Location Free Review On Vivo T2 5G | Dr.fone
- 8 Solutions to Solve YouTube App Crashing on Xiaomi 14 | Dr.fone
- Top 7 Skype Hacker to Hack Any Skype Account On your Samsung Galaxy F34 5G | Dr.fone
- In 2024, How to Fake Snapchat Location on Poco X6 Pro | Dr.fone
- How to Mirror PC Screen to Honor Play 40C Phones? | Dr.fone
- Updated Voicemod AI Review Transforming Your Voice in Real Time for 2024
- FRP Hijacker by Hagard Download and Bypass your Nokia G22 FRP Locks
- In 2024, Unlock Apple iPhone 15 With Forgotten Passcode Different Methods You Can Try | Dr.fone
- 8 Quick Fixes Unfortunately, Snapchat has Stopped on Vivo Y27 4G | Dr.fone
- In 2024, Why is iPogo not working On OnePlus Ace 2V? Fixed | Dr.fone
- In 2024, 5 Techniques to Transfer Data from Honor X8b to iPhone 15/14/13/12 | Dr.fone
- Why is iPogo not working On Vivo Y02T? Fixed | Dr.fone
- Simple ways to get lost music back from HTC U23
- Title: Updated 2024 Approved Get a Grip on Your Footage Stabilizing Video in After Effects
- Author: Amelia
- Created at : 2024-04-29 19:47:04
- Updated at : 2024-04-30 19:47:04
- Link: https://ai-driven-video-production.techidaily.com/updated-2024-approved-get-a-grip-on-your-footage-stabilizing-video-in-after-effects/
- License: This work is licensed under CC BY-NC-SA 4.0.
